The source port timeslot address for this new connection.
The format is represented using an IP address syntax
(4 byte string). Note that the maximum valid port
number and starting timeslot will vary depending on the
specified carrier and framing options. For example, an
octal T1/E1 device has 8 ports but the T1 link has 24
timeslots while the E1 link has 32 timeslots.
The 1st byte is reserved for future use
The 2nd byte represents the source Slot Number (1-11)
The 3rd byte represents the source Port Number (1-84)
The 4th byte represents the source starting Timeslot (1-232)
normal connections use range 1..32
For subRate connection types:
low nibble connections use range 101..132
high nibble connections use range 201..232
Parsed from file ERI-DNX-SMC-MIB.mib
Module: ERI-DNX-SMC-MIB
Vendor: Eastern Research Inc.
Module: ERI-DNX-SMC-MIB
[Automatically extracted from oidview.com]
addSrcAddr OBJECT-TYPE SYNTAX TimeSlotAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The source port timeslot address for this new connection. The format is represented using an IP address syntax (4 byte string). Note that the maximum valid port number and starting timeslot will vary depending on the specified carrier and framing options. For example, an octal T1/E1 device has 8 ports but the T1 link has 24 timeslots while the E1 link has 32 timeslots. The 1st byte is reserved for future use The 2nd byte represents the source Slot Number (1-11) The 3rd byte represents the source Port Number (1-84) The 4th byte represents the source starting Timeslot (1-232) normal connections use range 1..32 For subRate connection types: low nibble connections use range 101..132 high nibble connections use range 201..232 " ::= { addConnRecord 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.644.2.4.1.8.5.1 | addMapID | 0 | 0 | This number identifies the connection map where the new Connection is to be added. A value of zero will cause the system to add t… |
| 1.3.6.1.4.1.644.2.4.1.8.5.2 | addConnID | 0 | 0 | This number defaults to connection ID zero, which if used in a SET PDU, notifies the system to find and use the next available Co… |
| 1.3.6.1.4.1.644.2.4.1.8.5.3 | addConnName | 0 | 0 | This is the textual description of a connection within a given configuration map. This name is optional and will be generated by… |
| 1.3.6.1.4.1.644.2.4.1.8.5.4 | addConnType | 0 | 0 | The connection type for this system connection. fullDuplex (0) Bi-directional connection from Source port to Destination… |
| 1.3.6.1.4.1.644.2.4.1.8.5.6 | addDestAddr | 0 | 0 | The destination port timeslot address for this new connection. The format is represented using an IP address syntax (4 byte strin… |
| 1.3.6.1.4.1.644.2.4.1.8.5.7 | addComm | 0 | 0 | The type of communications utilized on this system connection. data (0) Data only voice (1) Voice only voiceAuToMu (2) Voice wi… |
| 1.3.6.1.4.1.644.2.4.1.8.5.8 | addConnSpeed | 0 | 0 | The data transmission speed in kilobytes per second (kbps) for this connection. The format is: -Speed in kbps-number of DS0-kbps… |
| 1.3.6.1.4.1.644.2.4.1.8.5.9 | addSrcTsBitmap | 0 | 0 | This is a bit field used for the source port timeslots. Each bit represents a link timeslot on the source port. Setting the bit i… |
| 1.3.6.1.4.1.644.2.4.1.8.5.10 | addDestTsBitmap | 0 | 0 | This is a bit field used for the destination port timeslots. Each bit represents a link timeslot on the destination port. Setting… |
| 1.3.6.1.4.1.644.2.4.1.8.5.11 | addBroadSrcId | 0 | 0 | The connection ID number of the broadcast source connection for a listener connection to read from. |
| 1.3.6.1.4.1.644.2.4.1.8.5.12 | addTestMode | 0 | 0 | This indicates whether the current connection is in test mode, and if so, the type of test access being used. none (0… |
| 1.3.6.1.4.1.644.2.4.1.8.5.13 | addCmdStatus | 0 | 0 | The command status for this system connection row/record. The value used in a SET will be replaced by a response value in the GET… |
| 1.3.6.1.4.1.644.2.4.1.8.5.14 | addSrcTrunkCProfile | 0 | 0 | This identifies the hex value used for the start of signaling. The valid values are in hex format 0 through f. |
| 1.3.6.1.4.1.644.2.4.1.8.5.15 | addDestTrunkCProfile | 0 | 0 | This identifies the hex value used for the end of signaling. The valid values are in hex format 0 through f. |