Reference record for OID 1.3.6.1.4.1.9.9.106

parent

1.3.6.1.4.1.9.9 (ciscoMgmt)

node code

106

node name

ciscoHsrpMIB

dot oid

1.3.6.1.4.1.9.9.106

type

OBJECT IDENTIFIER

asn1 oid

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoHsrpMIB(106)}

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoHsrpMIB(106)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoHsrpMIB(106)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoHsrpMIB(106)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoHsrpMIB(106)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoHsrpMIB(106)}

iri oid

/iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoHsrpMIB

/iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoHsrpMIB

/iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoHsrpMIB

/iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoHsrpMIB

/iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoHsrpMIB

/iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoHsrpMIB

iri by oid_info

/ISO/Identified-Organization/6/1/4/1/9/9/106

Description by circitor

The MIB module provides a means to monitor and configure
the Cisco IOS proprietary Hot Standby Router Protocol
(HSRP). Cisco HSRP protocol is defined in RFC2281.

Terminology:

HSRP is a protocol used amoung a group of routers for the
purpose of selecting an 'active router' and a 'standby
router'.

An 'active router' is the router of choice for routing
packets.

A 'standby router' is a router that takes over the routing
duties when an active router fails, or when preset
conditions have been met.

An 'HSRP group' or a 'standby group' is a set of routers
which communicate using HSRP. An HSRP group has a group MAC
address and a group Virtual IP address. These are the
designated addresses. The active router assumes (i.e.
inherits) these group addresses.

'Hello' messages are sent to indicate that a router is
running and is capable of becoming the active or standby
router.

'Hellotime' is the interval between successive HSRP Hello
messages from a given router.

'Holdtime' is the interval between the receipt of a Hello
message and the presumption that the sending router has
failed.

Parsed from file CISCO-HSRP-MIB.mib
Module: CISCO-HSRP-MIB

Description by oid_info

ciscoHsrpMIB MODULE-IDENTITY
LAST-UPDATED "9808030000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: [email protected]"
DESCRIPTION
"The MIB module for managing the Hot Standby Router
Protocol (HSRP)."
View at oid-info.com

Description by mibdepot

The MIB module provides a means to monitor and configure
the Cisco IOS proprietary Hot Standby Router Protocol
(HSRP). Cisco HSRP protocol is defined in RFC2281.

Terminology:

HSRP is a protocol used amoung a group of routers for the
purpose of selecting an 'active router' and a 'standby
router'.

An 'active router' is the router of choice for routing
packets.

A 'standby router' is a router that takes over the routing
duties when an active router fails, or when preset
conditions have been met.

An 'HSRP group' or a 'standby group' is a set of routers
which communicate using HSRP. An HSRP group has a group MAC
address and a group Virtual IP address. These are the
designated addresses. The active router assumes (i.e.
inherits) these group addresses.

'Hello' messages are sent to indicate that a router is
running and is capable of becoming the active or standby
router.

'Hellotime' is the interval between successive HSRP Hello
messages from a given router.

'Holdtime' is the interval between the receipt of a Hello
message and the presumption that the sending router has
failed.

Parsed from file CISCO-HSRP-MIB.my.txt
Company: None
Module: CISCO-HSRP-MIB

Description by cisco

The MIB module provides a means to monitor and configure
the Cisco IOS proprietary Hot Standby Router Protocol
(HSRP). Cisco HSRP protocol is defined in RFC2281.

Terminology:

HSRP is a protocol used amoung a group of routers for the
purpose of selecting an 'active router' and a 'standby
router'.

An 'active router' is the router of choice for routing
packets.

A 'standby router' is a router that takes over the routing
duties when an active router fails, or when preset
conditions have been met.

An 'HSRP group' or a 'standby group' is a set of routers
which communicate using HSRP. An HSRP group has a group MAC
address and a group Virtual IP address. These are the
designated addresses. The active router assumes (i.e.
inherits) these group addresses.

'Hello' messages are sent to indicate that a router is
running and is capable of becoming the active or standby
router.

'Hellotime' is the interval between successive HSRP Hello
messages from a given router.

'Holdtime' is the interval between the receipt of a Hello
message and the presumption that the sending router has
failed.

Information by circitor

ciscoHsrpMIB MODULE-IDENTITY
    LAST-UPDATED    "201009060000Z"
    ORGANIZATION    "Cisco Systems, Inc."
    CONTACT-INFO
            "Cisco Systems
            Customer Service

            Postal: 170 W Tasman Drive
            San Jose, CA  95134
            USA

            Tel: +1 800 553-NETS

            E-mail: [email protected]"
    DESCRIPTION
        "The MIB module provides a means to monitor and configure
        the Cisco IOS proprietary Hot Standby Router Protocol
        (HSRP). Cisco HSRP protocol is defined in RFC2281.

        Terminology:

        HSRP is a protocol used amoung a group of routers for the
        purpose of selecting an 'active router' and a 'standby
        router'.

        An 'active router' is the router of choice for routing
        packets.

        A 'standby router' is a router that takes over the routing
        duties when an active router fails, or when preset
        conditions have been met.

        An 'HSRP group' or a 'standby group' is a set of routers
        which communicate using HSRP. An HSRP group has a group MAC
        address and a group Virtual IP address. These are the
        designated addresses. The active router assumes (i.e.
        inherits) these group addresses.

        'Hello' messages are sent to indicate that a router is
        running and is capable of becoming the active or standby
        router.

        'Hellotime' is the interval between successive HSRP Hello
        messages from a given router.

        'Holdtime' is the interval between the receipt of a Hello
        message and the presumption that the sending router has
        failed."
    REVISION        "201009060000Z"
    DESCRIPTION
        "The following changes have been made.

        [1] Objects cHsrpGrpIpNone has been added to the
             cHsrpGrpTable.

        [2] Added new object group cHsrpGrpGroupSup


        [3] Added new compliance cHsrpComplianceRev2, which
            deprecates cHsrpComplianceRev1."
    REVISION        "200512200000Z"
    DESCRIPTION
        "Deprecated cHsrpCompliance and added cHsrpComplianceRev1
        to include cHsrpNotificationsGroup; Updated the imports
        such that Unsigned32 is imported from SNMPv2-SMI instead
        of CISCO-TC, and other clean-up."
    REVISION        "9808030000Z"
    DESCRIPTION
        "Initial version of this MIB."
    ::= { ciscoMgmt 106 }

Information by cisco_v1

ciscoHsrpMIB OBJECT IDENTIFIER ::= { ciscoMgmt 106 }

Information by oid_info

Automatically extracted from Cisco "SNMP v2 MIBs".

Information by mibdepot

ciscoHsrpMIB MODULE-IDENTITY
    LAST-UPDATED    "201009060000Z"
    ORGANIZATION    "Cisco Systems, Inc."
    CONTACT-INFO
            "Cisco Systems
            Customer Service

            Postal: 170 W Tasman Drive
            San Jose, CA  95134
            USA

            Tel: +1 800 553-NETS

            E-mail: [email protected]"
    DESCRIPTION
        "The MIB module provides a means to monitor and configure
        the Cisco IOS proprietary Hot Standby Router Protocol
        (HSRP). Cisco HSRP protocol is defined in RFC2281.

        Terminology:

        HSRP is a protocol used amoung a group of routers for the
        purpose of selecting an 'active router' and a 'standby
        router'.

        An 'active router' is the router of choice for routing
        packets.

        A 'standby router' is a router that takes over the routing
        duties when an active router fails, or when preset
        conditions have been met.

        An 'HSRP group' or a 'standby group' is a set of routers
        which communicate using HSRP. An HSRP group has a group MAC
        address and a group Virtual IP address. These are the
        designated addresses. The active router assumes (i.e.
        inherits) these group addresses.

        'Hello' messages are sent to indicate that a router is
        running and is capable of becoming the active or standby
        router.

        'Hellotime' is the interval between successive HSRP Hello
        messages from a given router.

        'Holdtime' is the interval between the receipt of a Hello
        message and the presumption that the sending router has
        failed."
    REVISION        "201009060000Z"
    DESCRIPTION
        "The following changes have been made.

        [1] Objects cHsrpGrpIpNone has been added to the
             cHsrpGrpTable.

        [2] Added new object group cHsrpGrpGroupSup


        [3] Added new compliance cHsrpComplianceRev2, which
            deprecates cHsrpComplianceRev1."
    REVISION        "200512200000Z"
    DESCRIPTION
        "Deprecated cHsrpCompliance and added cHsrpComplianceRev1
        to include cHsrpNotificationsGroup; Updated the imports
        such that Unsigned32 is imported from SNMPv2-SMI instead
        of CISCO-TC, and other clean-up."
    REVISION        "9808030000Z"
    DESCRIPTION
        "Initial version of this MIB."
    ::= { ciscoMgmt 106 }

Information by cisco

ciscoHsrpMIB MODULE-IDENTITY
    LAST-UPDATED    "201009060000Z"
    ORGANIZATION    "Cisco Systems, Inc."
    CONTACT-INFO
            "Cisco Systems
            Customer Service

            Postal: 170 W Tasman Drive
            San Jose, CA  95134
            USA

            Tel: +1 800 553-NETS

            E-mail: [email protected]"
    DESCRIPTION
        "The MIB module provides a means to monitor and configure
        the Cisco IOS proprietary Hot Standby Router Protocol
        (HSRP). Cisco HSRP protocol is defined in RFC2281.

        Terminology:

        HSRP is a protocol used amoung a group of routers for the
        purpose of selecting an 'active router' and a 'standby
        router'.

        An 'active router' is the router of choice for routing
        packets.

        A 'standby router' is a router that takes over the routing
        duties when an active router fails, or when preset
        conditions have been met.

        An 'HSRP group' or a 'standby group' is a set of routers
        which communicate using HSRP. An HSRP group has a group MAC
        address and a group Virtual IP address. These are the
        designated addresses. The active router assumes (i.e.
        inherits) these group addresses.

        'Hello' messages are sent to indicate that a router is
        running and is capable of becoming the active or standby
        router.

        'Hellotime' is the interval between successive HSRP Hello
        messages from a given router.

        'Holdtime' is the interval between the receipt of a Hello
        message and the presumption that the sending router has
        failed."
    REVISION        "201009060000Z"
    DESCRIPTION
        "The following changes have been made.

        [1] Objects cHsrpGrpIpNone has been added to the
             cHsrpGrpTable.

        [2] Added new object group cHsrpGrpGroupSup


        [3] Added new compliance cHsrpComplianceRev2, which
            deprecates cHsrpComplianceRev1."
    REVISION        "200512200000Z"
    DESCRIPTION
        "Deprecated cHsrpCompliance and added cHsrpComplianceRev1
        to include cHsrpNotificationsGroup; Updated the imports
        such that Unsigned32 is imported from SNMPv2-SMI instead
        of CISCO-TC, and other clean-up."
    REVISION        "9808030000Z"
    DESCRIPTION
        "Initial version of this MIB."
    ::= { ciscoMgmt 106 }

First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

Greg Satz

Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

Cisco Systems, Inc.

Children (3)

Brothers (645)

To many brothers! Only 100 nearest brothers are shown.