The Extension MIB module for the CISCO-HSRP-MIB which is
based on RFC2281.
This MIB provides an extension to the CISCO-HSRP-MIB which
defines Cisco's proprietary Hot Standby Routing Protocol
(HSRP), defined in RFC2281. The extensions cover assigning
of secondary HSRP ip addresses, modifying an HSRP Group's
priority by tracking the operational status of interfaces,
etc.
Terminology:
HSRP is a protocol used amoung a group of routers for the
purpose of selecting an active router and a standby router.
An active router is the router of choice for routing
packets.
A standby router is a router that takes over the routing
duties when an active router fails, or when preset
conditions have been met.
A HSRP group or a standby group is a set of routers
which communicate using HSRP. An HSRP group has a group
MAC address and a group IP address. These are the
designated addresses. The active router assumes
(i.e. inherits) these group addresses. An HSRP group is
identified by a ( ifIndex, cHsrpGrpNumber ) pair.
BIA stands for Burned In Address.
Parsed from file CISCO-HSRP-EXT-MIB.mib
Module: CISCO-HSRP-EXT-MIB
ciscoHsrpExtMIB MODULE-IDENTITY
LAST-UPDATED "9808030000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: [email protected]"
DESCRIPTION
"The Extension MIB module for the CISCO-HSRP-MIB which is
based on RFC2281."
View at oid-info.com
The Extension MIB module for the CISCO-HSRP-MIB which is
based on RFC2281.
This MIB provides an extension to the CISCO-HSRP-MIB which
defines Cisco's proprietary Hot Standby Routing Protocol
(HSRP), defined in RFC2281. The extensions cover assigning
of secondary HSRP ip addresses, modifying an HSRP Group's
priority by tracking the operational status of interfaces,
etc.
Terminology:
HSRP is a protocol used amoung a group of routers for the
purpose of selecting an active router and a standby router.
An active router is the router of choice for routing
packets.
A standby router is a router that takes over the routing
duties when an active router fails, or when preset
conditions have been met.
A HSRP group or a standby group is a set of routers
which communicate using HSRP. An HSRP group has a group
MAC address and a group IP address. These are the
designated addresses. The active router assumes
(i.e. inherits) these group addresses. An HSRP group is
identified by a ( ifIndex, cHsrpGrpNumber ) pair.
BIA stands for Burned In Address.
Parsed from file CISCO-HSRP-EXT-MIB.my.txt
Company: None
Module: CISCO-HSRP-EXT-MIB
The Extension MIB module for the CISCO-HSRP-MIB which is
based on RFC2281.
This MIB provides an extension to the CISCO-HSRP-MIB which
defines Cisco's proprietary Hot Standby Routing Protocol
(HSRP), defined in RFC2281. The extensions cover assigning
of secondary HSRP ip addresses, modifying an HSRP Group's
priority by tracking the operational status of interfaces,
etc.
Terminology:
HSRP is a protocol used amoung a group of routers for the
purpose of selecting an active router and a standby router.
An active router is the router of choice for routing
packets.
A standby router is a router that takes over the routing
duties when an active router fails, or when preset
conditions have been met.
A HSRP group or a standby group is a set of routers
which communicate using HSRP. An HSRP group has a group
MAC address and a group IP address. These are the
designated addresses. The active router assumes
(i.e. inherits) these group addresses. An HSRP group is
identified by a ( ifIndex, cHsrpGrpNumber ) pair.
BIA stands for Burned In Address.
ciscoHsrpExtMIB MODULE-IDENTITY LAST-UPDATED "201009020000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The Extension MIB module for the CISCO-HSRP-MIB which is based on RFC2281. This MIB provides an extension to the CISCO-HSRP-MIB which defines Cisco's proprietary Hot Standby Routing Protocol (HSRP), defined in RFC2281. The extensions cover assigning of secondary HSRP ip addresses, modifying an HSRP Group's priority by tracking the operational status of interfaces, etc. Terminology: HSRP is a protocol used amoung a group of routers for the purpose of selecting an active router and a standby router. An active router is the router of choice for routing packets. A standby router is a router that takes over the routing duties when an active router fails, or when preset conditions have been met. A HSRP group or a standby group is a set of routers which communicate using HSRP. An HSRP group has a group MAC address and a group IP address. These are the designated addresses. The active router assumes (i.e. inherits) these group addresses. An HSRP group is identified by a ( ifIndex, cHsrpGrpNumber ) pair. BIA stands for Burned In Address." REVISION "201009020000Z" DESCRIPTION "The following changes have been made. [1] Objects cHsrpExtIfTrackedIpNone has been deprecated. [2] Deprecates object group cHsrpExtIfTrackedGroupSup1, which supplementary to cHsrpExtIfTrackedGroup. [3] Added new compliance cHsrpExtComplianceRev2, which deprecates cHsrpExtComplianceRev1." REVISION "201002050000Z" DESCRIPTION "Added cHsrpExtIfTrackedIpNone to cHsrpExtIfTrackedTable Added new table cHsrpExtIfStandbyTable. Added OBJECT-GROUP cHsrpExtIfStandbyGroup91. Added OBJECT-GROUP cHsrpExtIfTrackedGroupSup1, which supplementary to cHsrpExtIfTrackedGroup. Added MODULE-COMPLIANCE cHsrpExtComplianceRev1, which deprecates cHsrpExtCompliance." REVISION "200602150000Z" DESCRIPTION "Updated the imports such that Unsigned32 is imported from SNMPv2-SMI instead of CISCO-TC. Updated the module description. Also updated the descriptions of cHsrpExtIfTrackedEntry and cHsrpExtIfTracked. Formatted the complete MIB." REVISION "9808030000Z" DESCRIPTION "Initial version of this mib." ::= { ciscoMgmt 107 }
ciscoHsrpExtMIB OBJECT IDENTIFIER ::= { ciscoMgmt 107 }
Automatically extracted from Cisco "SNMP v2 MIBs".
ciscoHsrpExtMIB MODULE-IDENTITY LAST-UPDATED "201009020000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The Extension MIB module for the CISCO-HSRP-MIB which is based on RFC2281. This MIB provides an extension to the CISCO-HSRP-MIB which defines Cisco's proprietary Hot Standby Routing Protocol (HSRP), defined in RFC2281. The extensions cover assigning of secondary HSRP ip addresses, modifying an HSRP Group's priority by tracking the operational status of interfaces, etc. Terminology: HSRP is a protocol used amoung a group of routers for the purpose of selecting an active router and a standby router. An active router is the router of choice for routing packets. A standby router is a router that takes over the routing duties when an active router fails, or when preset conditions have been met. A HSRP group or a standby group is a set of routers which communicate using HSRP. An HSRP group has a group MAC address and a group IP address. These are the designated addresses. The active router assumes (i.e. inherits) these group addresses. An HSRP group is identified by a ( ifIndex, cHsrpGrpNumber ) pair. BIA stands for Burned In Address." REVISION "201009020000Z" DESCRIPTION "The following changes have been made. [1] Objects cHsrpExtIfTrackedIpNone has been deprecated. [2] Deprecates object group cHsrpExtIfTrackedGroupSup1, which supplementary to cHsrpExtIfTrackedGroup. [3] Added new compliance cHsrpExtComplianceRev2, which deprecates cHsrpExtComplianceRev1." REVISION "201002050000Z" DESCRIPTION "Added cHsrpExtIfTrackedIpNone to cHsrpExtIfTrackedTable Added new table cHsrpExtIfStandbyTable. Added OBJECT-GROUP cHsrpExtIfStandbyGroup91. Added OBJECT-GROUP cHsrpExtIfTrackedGroupSup1, which supplementary to cHsrpExtIfTrackedGroup. Added MODULE-COMPLIANCE cHsrpExtComplianceRev1, which deprecates cHsrpExtCompliance." REVISION "200602150000Z" DESCRIPTION "Updated the imports such that Unsigned32 is imported from SNMPv2-SMI instead of CISCO-TC. Updated the module description. Also updated the descriptions of cHsrpExtIfTrackedEntry and cHsrpExtIfTracked. Formatted the complete MIB." REVISION "9808030000Z" DESCRIPTION "Initial version of this mib." ::= { ciscoMgmt 107 }
ciscoHsrpExtMIB MODULE-IDENTITY LAST-UPDATED "201009020000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The Extension MIB module for the CISCO-HSRP-MIB which is based on RFC2281. This MIB provides an extension to the CISCO-HSRP-MIB which defines Cisco's proprietary Hot Standby Routing Protocol (HSRP), defined in RFC2281. The extensions cover assigning of secondary HSRP ip addresses, modifying an HSRP Group's priority by tracking the operational status of interfaces, etc. Terminology: HSRP is a protocol used amoung a group of routers for the purpose of selecting an active router and a standby router. An active router is the router of choice for routing packets. A standby router is a router that takes over the routing duties when an active router fails, or when preset conditions have been met. A HSRP group or a standby group is a set of routers which communicate using HSRP. An HSRP group has a group MAC address and a group IP address. These are the designated addresses. The active router assumes (i.e. inherits) these group addresses. An HSRP group is identified by a ( ifIndex, cHsrpGrpNumber ) pair. BIA stands for Burned In Address." REVISION "201009020000Z" DESCRIPTION "The following changes have been made. [1] Objects cHsrpExtIfTrackedIpNone has been deprecated. [2] Deprecates object group cHsrpExtIfTrackedGroupSup1, which supplementary to cHsrpExtIfTrackedGroup. [3] Added new compliance cHsrpExtComplianceRev2, which deprecates cHsrpExtComplianceRev1." REVISION "201002050000Z" DESCRIPTION "Added cHsrpExtIfTrackedIpNone to cHsrpExtIfTrackedTable Added new table cHsrpExtIfStandbyTable. Added OBJECT-GROUP cHsrpExtIfStandbyGroup91. Added OBJECT-GROUP cHsrpExtIfTrackedGroupSup1, which supplementary to cHsrpExtIfTrackedGroup. Added MODULE-COMPLIANCE cHsrpExtComplianceRev1, which deprecates cHsrpExtCompliance." REVISION "200602150000Z" DESCRIPTION "Updated the imports such that Unsigned32 is imported from SNMPv2-SMI instead of CISCO-TC. Updated the module description. Also updated the descriptions of cHsrpExtIfTrackedEntry and cHsrpExtIfTracked. Formatted the complete MIB." REVISION "9808030000Z" DESCRIPTION "Initial version of this mib." ::= { ciscoMgmt 107 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.107.1 | ciscoHsrpExtMIBObjects | 2 | 24 | None |
1.3.6.1.4.1.9.9.107.3 | cHsrpExtConformance | 2 | 10 | None |
To many brothers! Only 100 nearest brothers are shown.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
... | ||||
1.3.6.1.4.1.9.9.57 | ciscoCompressionServiceAdapterMIB | 2 | 19 | Used to manage the compression service adapter. |
1.3.6.1.4.1.9.9.59 | ciscoStackMakerMIB | 2 | 15 | The MIB module for Cisco Systems' StackMaker. |
1.3.6.1.4.1.9.9.60 | ciscoAtmDualPhyMIB | 3 | 26 | Initial version of this MIB module. Phy definition Throughout this document phy is used as an abbreviation for Physical Interface.… |
1.3.6.1.4.1.9.9.61 | ciscoAccessEnvMonMIB | 3 | 13 | The MIB module to describe the additional status of the Environmental Monitor on those Cisco Access devices which support one. |
1.3.6.1.4.1.9.9.62 | ciscoVoiceAnalogIfMIB | 2 | 90 | Analog Voice Interface MIB module. This MIB manages the E&M, FXO, FXS Interfaces in the router. |
1.3.6.1.4.1.9.9.63 | ciscoVoiceDialControlMIB | 3 | 377 | This MIB module enhances the IETF Dial Control MIB (RFC2128) by providing management of voice telephony peers on both a circuit-s… |
1.3.6.1.4.1.9.9.64 | ciscoVoiceInterfaceMIB | 2 | 24 | Common Voice Interface MIB module. The MIB module manages the common voice related parameters for both voice analog and ISDN inte… |
1.3.6.1.4.1.9.9.65 | ciscoPnniMIB | 2 | 49 | The MIB module for managing Cisco specific extensions to the ATM Forum PNNI MIB. |
1.3.6.1.4.1.9.9.66 | ciscoAal5MIB | 2 | 25 | Cisco Enterprise AAL5 MIB file that provide AAL5 specific information that are either excluded by RFC 1695 or specific to Cisco p… |
1.3.6.1.4.1.9.9.67 | ciscoAtmAccessListMIB | 2 | 39 | A cisco ATM access list mib module. |
1.3.6.1.4.1.9.9.68 | ciscoVlanMembershipMIB | 3 | 90 | The MIB module for the management of the VLAN Membership within the frame work of Cisco VLAN Architecture, v 2.0 by Keith McClog… |
1.3.6.1.4.1.9.9.69 | ciscoLecDataVccMIB | 3 | 13 | This MIB module is a Cisco extension to the ATM Forum's LANE Client MIB. This extension identifies those VCCs which are being us… |
1.3.6.1.4.1.9.9.72 | ciscoCipCmpcMIB | 3 | 46 | This is the Management Information Base (MIB) module for objects used to manage the Cisco Multi-Path Channel (MPC) support on Cis… |
1.3.6.1.4.1.9.9.73 | ciscoCipTgMIB | 2 | 98 | This is the Management Information Base (MIB) module for objects used to manage Transmission Groups (TGs) in Cisco Mainframe Chan… |
1.3.6.1.4.1.9.9.74 | ciscoDlswExtMIB | 3 | 134 | The MIB module for management of Cisco specific Data Link Switching protocol enhancements. DLSw is described in RFC 1795 and RFC… |
1.3.6.1.4.1.9.9.76 | ciscoDlcSwitchMIB | 2 | 55 | This is the MIB module for objects used to manage FRAS sessions to the endstation. These objects are specific to downstream or end… |
1.3.6.1.4.1.9.9.77 | ciscoLecExtMIB | 3 | 12 | This MIB module is a Cisco extension to the ATM Forum's LANE Client MIB. |
1.3.6.1.4.1.9.9.78 | ciscoAtmSigDiagMIB | 2 | 58 | The MIB module to facilitate the diagnosis of failures of ATM Signalling requests. Through this MIB, an ATM device retains infor… |
1.3.6.1.4.1.9.9.80 | ciscoFtpClientMIB | 2 | 29 | The MIB module for invoking Internet File Transfer Protocol (FTP) operations for network management purposes. |
1.3.6.1.4.1.9.9.81 | ciscoBulkFileMIB | 3 | 63 | The MIB module for creating and deleting bulk files of SNMP data for file transfer. |
1.3.6.1.4.1.9.9.82 | ciscoStpExtensionsMIB | 3 | 300 | The MIB module for managing Cisco extensions to the 802.1D Spanning Tree Protocol (STP). |
1.3.6.1.4.1.9.9.83 | ciscoWredMIB | 2 | 26 | Cisco WRED MIB - Overview Cisco Weighted Random Early Detection/Drop is a method which avoids traffic congestion on an output int… |
1.3.6.1.4.1.9.9.84 | ciscoIpStatMIB | 2 | 34 | Cisco IP Statistics MIB - Overview This MIB incorporates objects to provide support for the Cisco IP statistics as implemented in… |
1.3.6.1.4.1.9.9.85 | ciscoCasIfMIB | 2 | 119 | Channel Associated Signal Interface MIB module. This MIB manages the generic CAS (Channel Associated Signal)or DS0 clear channel … |
1.3.6.1.4.1.9.9.86 | ciscoDspMgmtMIB | 4 | 141 | ciscoDspMgmtMIB MODULE-IDENTITY LAST-UPDATED "200008140000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Cu… |
1.3.6.1.4.1.9.9.87 | ciscoC2900MIB | 3 | 133 | The MIB module for Catalyst 2900 enterprise specific information |
1.3.6.1.4.1.9.9.88 | ciscoAtmExtMIB | 3 | 50 | ciscoAtmExtMIB MODULE-IDENTITY LAST-UPDATED "9706200000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Custo… |
1.3.6.1.4.1.9.9.89 | csCugMIB | 2 | 24 | This MIB module is for closed user group support (virtual private networks). |
1.3.6.1.4.1.9.9.91 | entitySensorMIB, ciscoEntitySensorMIB | 3 | 42 | The CISCO-ENTITY-SENSOR-MIB is used to monitor the values of sensors in the Entity-MIB (RFC 2037) entPhysicalTable. |
1.3.6.1.4.1.9.9.92 | ciscoEntityAssetMIB | 3 | 29 | Monitor the asset information of items in the ENTITY-MIB (RFC 2037) entPhysical table. |
1.3.6.1.4.1.9.9.94 | ciscoAtmPvcMIB | 2 | 19 | PVC's (Permanent Virtual Channel) can carry bridged PDUs (BPDUs) using the encapsulation method detailed in RFC1483. This is an alt… |
1.3.6.1.4.1.9.9.95 | ciscoAlpsMIB | 3 | 222 | The MIB module for Airline Protocol Support. ************************************************************** * … |
1.3.6.1.4.1.9.9.96 | ciscoConfigCopyMIB | 3 | 40 | This MIB facilitates writing of configuration files of an SNMP Agent running Cisco's IOS in the following ways: to and from the n… |
1.3.6.1.4.1.9.9.97 | ciscoSwitchEngineMIB | 3 | 385 | This MIB module defines management objects for Cisco Layer 2/3 switches. These devices may either have a single (central) switch… |
1.3.6.1.4.1.9.9.98 | ciscoPagpMIB | 2 | 52 | The MIB module for configuration of Fast Etherchannel and the operation of the Port Aggregation Protocol (PAgP). These features a… |
1.3.6.1.4.1.9.9.99 | ciscoLocalDirectorMIB | 3 | 88 | The MIB module to view information about LocalDirector. The Cisco LocalDirector is a device designed for the purpose of load balan… |
1.3.6.1.4.1.9.9.101 | ciscoSwitchCgmpMIB | 2 | 18 | Switch-side Cisco Group Management Protocol MIB for Layer 2 Switch devices. |
1.3.6.1.4.1.9.9.102 | ciscoMediaMailDialControlMIB | 2 | 63 | This MIB module enhances the IETF Dial Control MIB (RFC2128) for providing management of dial peers on both a circuit-switched te… |
1.3.6.1.4.1.9.9.103 | ciscoRmonConfigMIB | 3 | 123 | This module defines configuration extensions for some of the IETF RMON MIBs. The following terms are used throughout this MIB: A S… |
1.3.6.1.4.1.9.9.105 | ciscoC8500RedundancyMIB | 3 | 49 | This MIB allows management of redundancy of CPU and switch cards for the Catalyst 8540 switch, and other products with similar im… |
1.3.6.1.4.1.9.9.106 | ciscoHsrpMIB | 3 | 38 | ciscoHsrpMIB MODULE-IDENTITY LAST-UPDATED "9808030000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Custome… |
1.3.6.1.4.1.9.9.109 | ciscoProcessMIB | 3 | 187 | The MIB module to describe active system processes. |
1.3.6.1.4.1.9.9.110 | ciscoAtmSwitchFrRmMIB | 3 | 30 | This MIB module describes a set of objects used for switch Resource Management (RM) for Frame Relay/Frame based User-to-Network (… |
1.3.6.1.4.1.9.9.112 | ciscoAtmSwitchFrIwfMIB | 2 | 109 | A MIB module for managing Frame Relay to ATM interworking connections, and Frame Relay to Frame Relay switched connections via an… |
1.3.6.1.4.1.9.9.113 | ciscoCarMIB | 2 | 36 | Cisco CAR MIB - Overview Cisco Weighted Rate-limit, known as Commited Access Rate (CAR), is a traffic control method which uses a… |
1.3.6.1.4.1.9.9.114 | ciscoCableSpectrumMIB | 3 | 162 | This is the MIB Module for Cable Spectrum Management for DOCSIS-compliant Cable Modem Termination Systems (CMTS). Spectrum manage… |
1.3.6.1.4.1.9.9.115 | ciscoCasaFaMIB | 3 | 78 | This MIB module in conjunction with the CISCO-CASA-MIB, defines the SNMP management information base for managing the Cisco Appli… |
1.3.6.1.4.1.9.9.116 | ciscoDocsExtMIB | 3 | 235 | This is the MIB module for the Cisco specific extension objects of Data Over Cable Service, Radio Frequency interface. There is … |
1.3.6.1.4.1.9.9.117 | ciscoEntityFRUControlMIB | 3 | 147 | The CISCO-ENTITY-FRU-CONTROL-MIB is used to monitor and configure operational status of Field Replaceable Units (FRUs) and other … |
1.3.6.1.4.1.9.9.118 | ciscoUdldpMIB | 3 | 51 | Cisco Uni Direction Link Detection Protocol MIB |
1.3.6.1.4.1.9.9.120 | ciscoNetworkRegistrarMIB | 3 | 125 | MIB for Cisco Network Registrar (CNR). |
1.3.6.1.4.1.9.9.121 | ciscoAtmNetworkClockMIB | 3 | 53 | The MIB module for management of network clock distribution and the Network Clock Distribution Protocol (NCDP) in Cisco de… |
1.3.6.1.4.1.9.9.122 | ciscoCasaMIB | 3 | 78 | This MIB contains the basic objects for managing a Cisco Appliance Services Architecture (CASA) Entity. A CASA Entity can be a Ma… |
1.3.6.1.4.1.9.9.124 | ciscoCallResourcePoolMIB | 3 | 114 | The MIB module for call resource pool management. This MIB supports the resource pool manager feature of CISCO IOS. This feature … |
1.3.6.1.4.1.9.9.125 | ciscoWANRsrcPartMIB | 2 | 55 | The MIB module to manage resource partition objects. A resource partition is configured on a virtual interface (ifType value atmV… |
1.3.6.1.4.1.9.9.126 | ciscoSonetMIB | 3 | 136 | The MIB module to describe SONET/SDH interfaces objects. This is an extension to the standard SONET MIB(RFC 2558). |
1.3.6.1.4.1.9.9.128 | ciscoVlanIfTableRelationshipMIB | 1 | 12 | ciscoVlanIftableRelationshipMIB |
1.3.6.1.4.1.9.9.129 | ciscoAtmVirtualIfMIB | 2 | 139 | The MIB module to manage ATM Virtual interface objects. ATM virtual interfaces are configured on a physical line. |
1.3.6.1.4.1.9.9.130 | ciscoAdslDmtLineMIB | 3 | 72 | This MIB module serves as an enterprise-specific extension of the ADSL-LINE-MIB. The structure of this MIB module shadows the st… |
1.3.6.1.4.1.9.9.131 | ciscoSystemMIB | 3 | 57 | The systemGroup (see RFC 1907) provides a standard set of basic system information. This MIB module contains Cisco-defined exten… |
1.3.6.1.4.1.9.9.132 | ciscoDs3MIB | 2 | 140 | The MIB module to describe DS3 line objects. This is an extension to the standard DS3 MIB(RFC 2496). |
1.3.6.1.4.1.9.9.133 | ciscoAtmCellLayerMIB | 1 | 138 | The MIB module to describe ATM cell layer objects and statistics of a physical line. |
1.3.6.1.4.1.9.9.134 | ciscoClusterMIB | 3 | 49 | The MIB module for the management of a group of devices called a 'cluster'. A cluster comprises: 1. A command switch, which is a… |
1.3.6.1.4.1.9.9.135 | ciscoWirelessP2pBpiMIB | 3 | 66 | This is the MIB Module for the Baseline Privacy Interface (BPI) at Point to Point Wireless Radio Card. This is a specialization o… |
1.3.6.1.4.1.9.9.136 | ciscoWirelessIfMIB | 3 | 307 | This is the MIB Module for the Cisco Wireless Radio Point to Point interface specification. I) Relationship of the Cisco Wireless… |
1.3.6.1.4.1.9.9.137 | ciscoWirelessTextualConventions | 0 | 0 | This module defines textual conventions used in Cisco Wireless MIBs. |
1.3.6.1.4.1.9.9.138 | ciscoEntityAlarmMIB | 3 | 66 | This MIB module defines the managed objects that support the monitoring of alarms generated by physical entities contained by the… |
1.3.6.1.4.1.9.9.139 | ciscoEntityProvMIB | 3 | 13 | This MIB module defines the objects that support provisioning of 'container' class physical entities. Provisioning sets up a 'co… |
1.3.6.1.4.1.9.9.140 | ciscoCopsClientMIB | 3 | 43 | This MIB module is for configuration & statistic query of Common Open Policy Service(COPS) client feature on the Cisco device. C… |
1.3.6.1.4.1.9.9.141 | ciscoVSIControllerMIB | 2 | 21 | This MIB module is used for configuring ATM Capable Switch to be aware of VSI Controller information. Terminolgies used: VSI … |
1.3.6.1.4.1.9.9.144 | ciscoTransactionConnectionMIB | 2 | 66 | The MIB module for retrieving Cisco Transaction Connection configuration and status. Cisco Transaction Connection routes transac… |
1.3.6.1.4.1.9.9.145 | ciscoWanModuleMIB | 3 | 32 | The MIB to configure Connection Specific parameters and statistics related information in a Service Module. The Service Module(SM… |
1.3.6.1.4.1.9.9.146 | ciscoCallApplicationMIB | 2 | 548 | This MIB allows management of call applications on a network device. A 'call application' is a software module that processes cal… |
1.3.6.1.4.1.9.9.147 | ciscoFirewallMIB | 3 | 75 | MIB module for monitoring Cisco Firewalls. |
1.3.6.1.4.1.9.9.148 | ciscoBgpPolAcctMIB | 2 | 15 | BGP policy based accounting information |
1.3.6.1.4.1.9.9.149 | ciscoAdslLineCapMIB | 3 | 46 | This MIB module serves as an enterprise-specific extension of the ADSL-LINE-MIB. The structure of this MIB module shadows the st… |
1.3.6.1.4.1.9.9.150 | ciscoAAASessionMIB | 3 | 31 | This MIB module provides data for accounting sessions based on Authentication, Authorization, Accounting (AAA) protocols. Referenc… |
1.3.6.1.4.1.9.9.151 | ciscoL2L3IfConfigMIB | 2 | 11 | Interface switchport mode configuration management MIB. This MIB is used to monitor and control configuration of interface switch… |
1.3.6.1.4.1.9.9.152 | ciscoSipUaMIB | 4 | 504 | Cisco User Agent Session Initiation Protocol (SIP) MIB module. SIP is an application-layer signalling protocol for creating, mod… |
1.3.6.1.4.1.9.9.154 | ciscoIdslLineMIB | 3 | 148 | This MIB module describes IDSL (ISDN Digital Line Subscriber) line interfaces. The structure of this module resembles that of th… |
1.3.6.1.4.1.9.9.155 | ciscoSdslLineMIB | 3 | 170 | This MIB module describes all variations of the symmetric DSL line interfaces. The structure of this module resembles and mainta… |
1.3.6.1.4.1.9.9.156 | ciscoCcmMIB | 3 | 487 | The MIB Module for the management of a Cisco Unified Communications Manager (CUCM) application running with a Cisco Communication… |
1.3.6.1.4.1.9.9.157 | ciscoCdmaPdsnMIB | 3 | 984 | This MIB is to support the CDMA PDSN (Packet Data Serving Node) feature. A CDMA2000 network supports wireless data communication… |
... |