The MIB module for the management of a group of
devices called a 'cluster'. A cluster comprises:
1. A command switch, which is a device that can provide
a single point of management (including SNMP, Web
Console and CLI/Telnet Console) for the devices
in the cluster;
2. Zero or more expansion switches, or called the
cluster members throughout the context of this MIB,
which are devices that can be managed via a command
switch. The command switch is also considered as a
cluster member. Thus it has an entry in the MIB tables
defined below for cluster members.
Only the command switch IP address, passwords, and SNMP
community strings need to be configured in order to
provide management access to members of the cluster.
The Entity MIB is cross-referenced from this MIB for
some of its table entries, which contain useful
information about a cluster. For example, in the
Entity MIB, there is the logical table which contains
the community string. This information is used to
access detailed management information for some logical
entity (the cluster, in this case).
To determine if a particular device can be a command switch
or a member switch please refer to the device's
user's guide.
Parsed from file CISCO-CLUSTER-MIB.mib
Module: CISCO-CLUSTER-MIB
The MIB module for the management of a group of
devices called a 'cluster'. A cluster comprises:
1. A command switch, which is a device that can provide
a single point of management (including SNMP, Web
Console and CLI/Telnet Console) for the devices
in the cluster;
2. Zero or more expansion switches, or called the
cluster members throughout the context of this MIB,
which are devices that can be managed via a command
switch. The command switch is also considered as a
cluster member. Thus it has an entry in the MIB tables
defined below for cluster members.
Only the command switch IP address, passwords, and SNMP
community strings need to be configured in order to
provide management access to members of the cluster.
The Entity MIB is cross-referenced from this MIB for
some of its table entries, which contain useful
information about a cluster. For example, in the
Entity MIB, there is the logical table which contains
the community string. This information is used to
access detailed management information for some logical
entity (the cluster, in this case).
To determine if a particular device can be a command switch
or a member switch please refer to the device's
user's guide.
Parsed from file cisco-cluster.mib.txt
Company: None
Module: CISCO-CLUSTER-MIB
The MIB module for the management of a group of
devices called a 'cluster'. A cluster comprises:
1. A command switch, which is a device that can provide
a single point of management (including SNMP, Web
Console and CLI/Telnet Console) for the devices
in the cluster;
2. Zero or more expansion switches, or called the
cluster members throughout the context of this MIB,
which are devices that can be managed via a command
switch. The command switch is also considered as a
cluster member. Thus it has an entry in the MIB tables
defined below for cluster members.
Only the command switch IP address, passwords, and SNMP
community strings need to be configured in order to
provide management access to members of the cluster.
The Entity MIB is cross-referenced from this MIB for
some of its table entries, which contain useful
information about a cluster. For example, in the
Entity MIB, there is the logical table which contains
the community string. This information is used to
access detailed management information for some logical
entity (the cluster, in this case).
To determine if a particular device can be a command switch
or a member switch please refer to the device's
user's guide.
ciscoClusterMIB MODULE-IDENTITY LAST-UPDATED "200511180000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 West Tasman Drive, San Jose CA 95134-1706. USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The MIB module for the management of a group of devices called a 'cluster'. A cluster comprises: 1. A command switch, which is a device that can provide a single point of management (including SNMP, Web Console and CLI/Telnet Console) for the devices in the cluster; 2. Zero or more expansion switches, or called the cluster members throughout the context of this MIB, which are devices that can be managed via a command switch. The command switch is also considered as a cluster member. Thus it has an entry in the MIB tables defined below for cluster members. Only the command switch IP address, passwords, and SNMP community strings need to be configured in order to provide management access to members of the cluster. The Entity MIB is cross-referenced from this MIB for some of its table entries, which contain useful information about a cluster. For example, in the Entity MIB, there is the logical table which contains the community string. This information is used to access detailed management information for some logical entity (the cluster, in this case). To determine if a particular device can be a command switch or a member switch please refer to the device's user's guide." REVISION "200511180000Z" DESCRIPTION "Updated the imports such that Unsigned32 is imported from SNMPv2-SMI instead of CISCO-TC. Re-ordered the imports such that the SNMPv2 imports are imported first. Added a new NOTIFICATION GROUP ciscoClusterNotificationGroup to include the notification ccStatusMemberStatusChange. Also deprecated the old MODULE-COMPLIANCE ciscoClusterCompliance, and added a new MODULE-COMPLIANCE ciscoClusterComplianceRev1 such that its MANDATORY-GROUPS include this new NOTIFICATION GROUP and all the MANDATORY-GROUPS of ciscoClusterCompliance." REVISION "9907280000Z" DESCRIPTION "Initial version of this mib." ::= { ciscoMgmt 134 }
ciscoClusterMIB OBJECT IDENTIFIER ::= { ciscoMgmt 134 }
Vendor: Cisco
Module: CISCO-CLUSTER-MIB
[Automatically extracted from oidview.com]
ciscoClusterMIB MODULE-IDENTITY LAST-UPDATED "200511180000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 West Tasman Drive, San Jose CA 95134-1706. USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The MIB module for the management of a group of devices called a 'cluster'. A cluster comprises: 1. A command switch, which is a device that can provide a single point of management (including SNMP, Web Console and CLI/Telnet Console) for the devices in the cluster; 2. Zero or more expansion switches, or called the cluster members throughout the context of this MIB, which are devices that can be managed via a command switch. The command switch is also considered as a cluster member. Thus it has an entry in the MIB tables defined below for cluster members. Only the command switch IP address, passwords, and SNMP community strings need to be configured in order to provide management access to members of the cluster. The Entity MIB is cross-referenced from this MIB for some of its table entries, which contain useful information about a cluster. For example, in the Entity MIB, there is the logical table which contains the community string. This information is used to access detailed management information for some logical entity (the cluster, in this case). To determine if a particular device can be a command switch or a member switch please refer to the device's user's guide." REVISION "200511180000Z" DESCRIPTION "Updated the imports such that Unsigned32 is imported from SNMPv2-SMI instead of CISCO-TC. Re-ordered the imports such that the SNMPv2 imports are imported first. Added a new NOTIFICATION GROUP ciscoClusterNotificationGroup to include the notification ccStatusMemberStatusChange. Also deprecated the old MODULE-COMPLIANCE ciscoClusterCompliance, and added a new MODULE-COMPLIANCE ciscoClusterComplianceRev1 such that its MANDATORY-GROUPS include this new NOTIFICATION GROUP and all the MANDATORY-GROUPS of ciscoClusterCompliance." REVISION "9907280000Z" DESCRIPTION "Initial version of this mib." ::= { ciscoMgmt 134 }
ciscoClusterMIB MODULE-IDENTITY LAST-UPDATED "200511180000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 West Tasman Drive, San Jose CA 95134-1706. USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The MIB module for the management of a group of devices called a 'cluster'. A cluster comprises: 1. A command switch, which is a device that can provide a single point of management (including SNMP, Web Console and CLI/Telnet Console) for the devices in the cluster; 2. Zero or more expansion switches, or called the cluster members throughout the context of this MIB, which are devices that can be managed via a command switch. The command switch is also considered as a cluster member. Thus it has an entry in the MIB tables defined below for cluster members. Only the command switch IP address, passwords, and SNMP community strings need to be configured in order to provide management access to members of the cluster. The Entity MIB is cross-referenced from this MIB for some of its table entries, which contain useful information about a cluster. For example, in the Entity MIB, there is the logical table which contains the community string. This information is used to access detailed management information for some logical entity (the cluster, in this case). To determine if a particular device can be a command switch or a member switch please refer to the device's user's guide." REVISION "200511180000Z" DESCRIPTION "Updated the imports such that Unsigned32 is imported from SNMPv2-SMI instead of CISCO-TC. Re-ordered the imports such that the SNMPv2 imports are imported first. Added a new NOTIFICATION GROUP ciscoClusterNotificationGroup to include the notification ccStatusMemberStatusChange. Also deprecated the old MODULE-COMPLIANCE ciscoClusterCompliance, and added a new MODULE-COMPLIANCE ciscoClusterComplianceRev1 such that its MANDATORY-GROUPS include this new NOTIFICATION GROUP and all the MANDATORY-GROUPS of ciscoClusterCompliance." REVISION "9907280000Z" DESCRIPTION "Initial version of this mib." ::= { ciscoMgmt 134 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.134.1 | ciscoClusterMIBObjects | 3 | 35 | None |
| 1.3.6.1.4.1.9.9.134.2 | ciscoClusterMIBNotificationsPrefix | 1 | 2 | None |
| 1.3.6.1.4.1.9.9.134.3 | ciscoClusterMIBConformance | 2 | 9 | None |
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.9.9.84 | ciscoIpStatMIB | 2 | 34 | Cisco IP Statistics MIB - Overview This MIB incorporates objects to provide support for the Cisco IP statistics as implemented in… |
| 1.3.6.1.4.1.9.9.85 | ciscoCasIfMIB | 2 | 119 | Channel Associated Signal Interface MIB module. This MIB manages the generic CAS (Channel Associated Signal)or DS0 clear channel … |
| 1.3.6.1.4.1.9.9.86 | ciscoDspMgmtMIB | 4 | 141 | ciscoDspMgmtMIB MODULE-IDENTITY LAST-UPDATED "200008140000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Cu… |
| 1.3.6.1.4.1.9.9.87 | ciscoC2900MIB | 3 | 133 | The MIB module for Catalyst 2900 enterprise specific information |
| 1.3.6.1.4.1.9.9.88 | ciscoAtmExtMIB | 3 | 50 | ciscoAtmExtMIB MODULE-IDENTITY LAST-UPDATED "9706200000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Custo… |
| 1.3.6.1.4.1.9.9.89 | csCugMIB | 2 | 24 | This MIB module is for closed user group support (virtual private networks). |
| 1.3.6.1.4.1.9.9.91 | entitySensorMIB, ciscoEntitySensorMIB | 3 | 42 | The CISCO-ENTITY-SENSOR-MIB is used to monitor the values of sensors in the Entity-MIB (RFC 2037) entPhysicalTable. |
| 1.3.6.1.4.1.9.9.92 | ciscoEntityAssetMIB | 3 | 29 | Monitor the asset information of items in the ENTITY-MIB (RFC 2037) entPhysical table. |
| 1.3.6.1.4.1.9.9.94 | ciscoAtmPvcMIB | 2 | 19 | PVC's (Permanent Virtual Channel) can carry bridged PDUs (BPDUs) using the encapsulation method detailed in RFC1483. This is an alt… |
| 1.3.6.1.4.1.9.9.95 | ciscoAlpsMIB | 3 | 222 | The MIB module for Airline Protocol Support. ************************************************************** * … |
| 1.3.6.1.4.1.9.9.96 | ciscoConfigCopyMIB | 3 | 40 | This MIB facilitates writing of configuration files of an SNMP Agent running Cisco's IOS in the following ways: to and from the n… |
| 1.3.6.1.4.1.9.9.97 | ciscoSwitchEngineMIB | 3 | 385 | This MIB module defines management objects for Cisco Layer 2/3 switches. These devices may either have a single (central) switch… |
| 1.3.6.1.4.1.9.9.98 | ciscoPagpMIB | 2 | 52 | The MIB module for configuration of Fast Etherchannel and the operation of the Port Aggregation Protocol (PAgP). These features a… |
| 1.3.6.1.4.1.9.9.99 | ciscoLocalDirectorMIB | 3 | 88 | The MIB module to view information about LocalDirector. The Cisco LocalDirector is a device designed for the purpose of load balan… |
| 1.3.6.1.4.1.9.9.101 | ciscoSwitchCgmpMIB | 2 | 18 | Switch-side Cisco Group Management Protocol MIB for Layer 2 Switch devices. |
| 1.3.6.1.4.1.9.9.102 | ciscoMediaMailDialControlMIB | 2 | 63 | This MIB module enhances the IETF Dial Control MIB (RFC2128) for providing management of dial peers on both a circuit-switched te… |
| 1.3.6.1.4.1.9.9.103 | ciscoRmonConfigMIB | 3 | 123 | This module defines configuration extensions for some of the IETF RMON MIBs. The following terms are used throughout this MIB: A S… |
| 1.3.6.1.4.1.9.9.105 | ciscoC8500RedundancyMIB | 3 | 49 | This MIB allows management of redundancy of CPU and switch cards for the Catalyst 8540 switch, and other products with similar im… |
| 1.3.6.1.4.1.9.9.106 | ciscoHsrpMIB | 3 | 38 | ciscoHsrpMIB MODULE-IDENTITY LAST-UPDATED "9808030000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Custome… |
| 1.3.6.1.4.1.9.9.107 | ciscoHsrpExtMIB | 2 | 36 | ciscoHsrpExtMIB MODULE-IDENTITY LAST-UPDATED "9808030000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Cust… |
| 1.3.6.1.4.1.9.9.109 | ciscoProcessMIB | 3 | 187 | The MIB module to describe active system processes. |
| 1.3.6.1.4.1.9.9.110 | ciscoAtmSwitchFrRmMIB | 3 | 30 | This MIB module describes a set of objects used for switch Resource Management (RM) for Frame Relay/Frame based User-to-Network (… |
| 1.3.6.1.4.1.9.9.112 | ciscoAtmSwitchFrIwfMIB | 2 | 109 | A MIB module for managing Frame Relay to ATM interworking connections, and Frame Relay to Frame Relay switched connections via an… |
| 1.3.6.1.4.1.9.9.113 | ciscoCarMIB | 2 | 36 | Cisco CAR MIB - Overview Cisco Weighted Rate-limit, known as Commited Access Rate (CAR), is a traffic control method which uses a… |
| 1.3.6.1.4.1.9.9.114 | ciscoCableSpectrumMIB | 3 | 162 | This is the MIB Module for Cable Spectrum Management for DOCSIS-compliant Cable Modem Termination Systems (CMTS). Spectrum manage… |
| 1.3.6.1.4.1.9.9.115 | ciscoCasaFaMIB | 3 | 78 | This MIB module in conjunction with the CISCO-CASA-MIB, defines the SNMP management information base for managing the Cisco Appli… |
| 1.3.6.1.4.1.9.9.116 | ciscoDocsExtMIB | 3 | 235 | This is the MIB module for the Cisco specific extension objects of Data Over Cable Service, Radio Frequency interface. There is … |
| 1.3.6.1.4.1.9.9.117 | ciscoEntityFRUControlMIB | 3 | 147 | The CISCO-ENTITY-FRU-CONTROL-MIB is used to monitor and configure operational status of Field Replaceable Units (FRUs) and other … |
| 1.3.6.1.4.1.9.9.118 | ciscoUdldpMIB | 3 | 51 | Cisco Uni Direction Link Detection Protocol MIB |
| 1.3.6.1.4.1.9.9.120 | ciscoNetworkRegistrarMIB | 3 | 125 | MIB for Cisco Network Registrar (CNR). |
| 1.3.6.1.4.1.9.9.121 | ciscoAtmNetworkClockMIB | 3 | 53 | The MIB module for management of network clock distribution and the Network Clock Distribution Protocol (NCDP) in Cisco de… |
| 1.3.6.1.4.1.9.9.122 | ciscoCasaMIB | 3 | 78 | This MIB contains the basic objects for managing a Cisco Appliance Services Architecture (CASA) Entity. A CASA Entity can be a Ma… |
| 1.3.6.1.4.1.9.9.124 | ciscoCallResourcePoolMIB | 3 | 114 | The MIB module for call resource pool management. This MIB supports the resource pool manager feature of CISCO IOS. This feature … |
| 1.3.6.1.4.1.9.9.125 | ciscoWANRsrcPartMIB | 2 | 55 | The MIB module to manage resource partition objects. A resource partition is configured on a virtual interface (ifType value atmV… |
| 1.3.6.1.4.1.9.9.126 | ciscoSonetMIB | 3 | 136 | The MIB module to describe SONET/SDH interfaces objects. This is an extension to the standard SONET MIB(RFC 2558). |
| 1.3.6.1.4.1.9.9.128 | ciscoVlanIfTableRelationshipMIB | 1 | 12 | ciscoVlanIftableRelationshipMIB |
| 1.3.6.1.4.1.9.9.129 | ciscoAtmVirtualIfMIB | 2 | 139 | The MIB module to manage ATM Virtual interface objects. ATM virtual interfaces are configured on a physical line. |
| 1.3.6.1.4.1.9.9.130 | ciscoAdslDmtLineMIB | 3 | 72 | This MIB module serves as an enterprise-specific extension of the ADSL-LINE-MIB. The structure of this MIB module shadows the st… |
| 1.3.6.1.4.1.9.9.131 | ciscoSystemMIB | 3 | 57 | The systemGroup (see RFC 1907) provides a standard set of basic system information. This MIB module contains Cisco-defined exten… |
| 1.3.6.1.4.1.9.9.132 | ciscoDs3MIB | 2 | 140 | The MIB module to describe DS3 line objects. This is an extension to the standard DS3 MIB(RFC 2496). |
| 1.3.6.1.4.1.9.9.133 | ciscoAtmCellLayerMIB | 1 | 138 | The MIB module to describe ATM cell layer objects and statistics of a physical line. |
| 1.3.6.1.4.1.9.9.135 | ciscoWirelessP2pBpiMIB | 3 | 66 | This is the MIB Module for the Baseline Privacy Interface (BPI) at Point to Point Wireless Radio Card. This is a specialization o… |
| 1.3.6.1.4.1.9.9.136 | ciscoWirelessIfMIB | 3 | 307 | This is the MIB Module for the Cisco Wireless Radio Point to Point interface specification. I) Relationship of the Cisco Wireless… |
| 1.3.6.1.4.1.9.9.137 | ciscoWirelessTextualConventions | 0 | 0 | This module defines textual conventions used in Cisco Wireless MIBs. |
| 1.3.6.1.4.1.9.9.138 | ciscoEntityAlarmMIB | 3 | 66 | This MIB module defines the managed objects that support the monitoring of alarms generated by physical entities contained by the… |
| 1.3.6.1.4.1.9.9.139 | ciscoEntityProvMIB | 3 | 13 | This MIB module defines the objects that support provisioning of 'container' class physical entities. Provisioning sets up a 'co… |
| 1.3.6.1.4.1.9.9.140 | ciscoCopsClientMIB | 3 | 43 | This MIB module is for configuration & statistic query of Common Open Policy Service(COPS) client feature on the Cisco device. C… |
| 1.3.6.1.4.1.9.9.141 | ciscoVSIControllerMIB | 2 | 21 | This MIB module is used for configuring ATM Capable Switch to be aware of VSI Controller information. Terminolgies used: VSI … |
| 1.3.6.1.4.1.9.9.144 | ciscoTransactionConnectionMIB | 2 | 66 | The MIB module for retrieving Cisco Transaction Connection configuration and status. Cisco Transaction Connection routes transac… |
| 1.3.6.1.4.1.9.9.145 | ciscoWanModuleMIB | 3 | 32 | The MIB to configure Connection Specific parameters and statistics related information in a Service Module. The Service Module(SM… |
| 1.3.6.1.4.1.9.9.146 | ciscoCallApplicationMIB | 2 | 548 | This MIB allows management of call applications on a network device. A 'call application' is a software module that processes cal… |
| 1.3.6.1.4.1.9.9.147 | ciscoFirewallMIB | 3 | 75 | MIB module for monitoring Cisco Firewalls. |
| 1.3.6.1.4.1.9.9.148 | ciscoBgpPolAcctMIB | 2 | 15 | BGP policy based accounting information |
| 1.3.6.1.4.1.9.9.149 | ciscoAdslLineCapMIB | 3 | 46 | This MIB module serves as an enterprise-specific extension of the ADSL-LINE-MIB. The structure of this MIB module shadows the st… |
| 1.3.6.1.4.1.9.9.150 | ciscoAAASessionMIB | 3 | 31 | This MIB module provides data for accounting sessions based on Authentication, Authorization, Accounting (AAA) protocols. Referenc… |
| 1.3.6.1.4.1.9.9.151 | ciscoL2L3IfConfigMIB | 2 | 11 | Interface switchport mode configuration management MIB. This MIB is used to monitor and control configuration of interface switch… |
| 1.3.6.1.4.1.9.9.152 | ciscoSipUaMIB | 4 | 504 | Cisco User Agent Session Initiation Protocol (SIP) MIB module. SIP is an application-layer signalling protocol for creating, mod… |
| 1.3.6.1.4.1.9.9.154 | ciscoIdslLineMIB | 3 | 148 | This MIB module describes IDSL (ISDN Digital Line Subscriber) line interfaces. The structure of this module resembles that of th… |
| 1.3.6.1.4.1.9.9.155 | ciscoSdslLineMIB | 3 | 170 | This MIB module describes all variations of the symmetric DSL line interfaces. The structure of this module resembles and mainta… |
| 1.3.6.1.4.1.9.9.156 | ciscoCcmMIB | 3 | 487 | The MIB Module for the management of a Cisco Unified Communications Manager (CUCM) application running with a Cisco Communication… |
| 1.3.6.1.4.1.9.9.157 | ciscoCdmaPdsnMIB | 3 | 984 | This MIB is to support the CDMA PDSN (Packet Data Serving Node) feature. A CDMA2000 network supports wireless data communication… |
| 1.3.6.1.4.1.9.9.158 | ciscoAAAClientMIB | 3 | 25 | This MIB module provides data for authentication method priority based on Authentication, Authorization, Accounting (AAA) protoco… |
| 1.3.6.1.4.1.9.9.159 | ciscoQosPolicyConfigMIB | 3 | 35 | This MIB module defines managed objects that support the policy source configuration of Quality of Service (QoS) on the device. T… |
| 1.3.6.1.4.1.9.9.160 | ciscoCircuitInterfaceMIB | 2 | 11 | The MIB module to configure the circuit description for an interface. The circuit description can be used to describe and identify… |
| 1.3.6.1.4.1.9.9.161 | ciscoSlbMIB | 3 | 279 | The MIB for managing Server Load Balancing Manager(s), such as the Cisco IOS SLB product. This MIB includes instrumentation for t… |
| 1.3.6.1.4.1.9.9.162 | ciscoVsiMasterMIB | 3 | 100 | This MIB module contains objects related to the master side of the Virtual Switch Interface protocol used for control of ATM swit… |
| 1.3.6.1.4.1.9.9.163 | ciscoCallTrackerMIB | 3 | 104 | CISCO-CALL-TRACKER-MIB |
| 1.3.6.1.4.1.9.9.164 | ciscoCallTrackerTCPMIB | 3 | 25 | This MIB module provides TCP service connection related data for tracking the progress and status of a call. This module extends t… |
| 1.3.6.1.4.1.9.9.165 | ciscoCallTrackerModemMIB | 3 | 97 | This MIB module provides modem call related data for tracking the progress and status of a call. This module extends tables defin… |
| 1.3.6.1.4.1.9.9.166 | ciscoCBQosMIB | 2 | 544 | Cisco Class-Based QoS MIB ********************************** Overview ********************************** This MIB provides read acc… |
| 1.3.6.1.4.1.9.9.167 | ciscoWirelessDocsIfMib | 3 | 140 | This is the MIB Module for MCNS compliant Radio Frequency (RF) interfaces in wireless point-to-multipoint subscriber units (SU) a… |
| 1.3.6.1.4.1.9.9.168 | ciscoNtpMIB | 3 | 87 | This MIB module defines a MIB which provides mechanisms to monitor an NTP server. The MIB is derived from the Technical Report #Ma… |
| 1.3.6.1.4.1.9.9.169 | ciscoWirelessDocsExtMIB | 3 | 99 | This MIB module defines Cisco-specific objects that add to the functionality defined in CISCO-WIRELESS-DOCS-IF-MIB. These objects … |
| 1.3.6.1.4.1.9.9.170 | ciscoWirelessPhyMIB | 2 | 112 | This is the MIB Module for the Cisco Wireless Radio Point to MultiPoint interface. |
| 1.3.6.1.4.1.9.9.171 | ciscoIpSecFlowMonitorMIB | 3 | 507 | This is a MIB Module for monitoring the structures in IPSec-based Virtual Private Networks. The MIB has been designed to be adopt… |
| 1.3.6.1.4.1.9.9.172 | ciscoIpSecPolMapMIB | 3 | 21 | The MIB module maps the IPSec entities created dynamically to the policy entities that caused them. This is an appendix to the IPS… |
| 1.3.6.1.4.1.9.9.173 | ciscoPrivateVlanMIB | 2 | 56 | The MIB module to support Private VLAN feature on Cisco's switching devices. |
| 1.3.6.1.4.1.9.9.174 | ciscoMobileIpMIB | 3 | 533 | An extension to the IETF MIB module defined in RFC-2006 for managing Mobile IP implementations. Mobile IP introduces the followin… |
| 1.3.6.1.4.1.9.9.175 | ciscoIfLinkConfigMIB | 2 | 15 | The MIB module for configuration of bulk distribution (de-multiplexing of traffic from higher-bandwidth to lower-bandwidth interf… |
| 1.3.6.1.4.1.9.9.176 | ciscoRFMIB | 3 | 117 | This MIB provides configuration control and status for the Redundancy Framework (RF) subsystem. RF provides a mechanism for logic… |
| 1.3.6.1.4.1.9.9.177 | ciscoSaaApmMIB | 3 | 38 | Acronyms and Terms: SAA - Service Assurance Agent APM - Application Performance Monitoring A MIB for controlling SAA APM. APM provi… |
| 1.3.6.1.4.1.9.9.178 | ciscoContentEngineMIB | 3 | 263 | The MIB module for the Cisco Content Engine from Cisco Systems, Inc. |
| 1.3.6.1.4.1.9.9.179 | ciscoCatOSAclQosMIB | 3 | 470 | This MIB module is for Access Control Lists(ACLs) configuration of Quality of Service (QoS) as well as Security feature on the Ci… |
| 1.3.6.1.4.1.9.9.180 | ciscoWirelessRfMetricsMIB | 5 | 99 | This is the MIB Module for the Cisco Wireless Radio Point to MultiPoint interface specification. |
| 1.3.6.1.4.1.9.9.181 | ciscoWirelessLinkMetricsMIB | 4 | 141 | This is the MIB Module for the Cisco Wireless Radio Point to MultiPoint interface link metrics specification. Glossary The followin… |
| 1.3.6.1.4.1.9.9.183 | ciscoGprsAccPtMIB | 3 | 338 | This MIB module supports access point configuration for GGSN in a GPRS system. GPRS [1] is a GSM network providing mobile wireles… |
| 1.3.6.1.4.1.9.9.184 | ciscoPimMIB | 3 | 36 | This MIB module defines the cisco specific variables for Protocol Independent Multicast (PIM) management. These definitions are a… |
| ... | ||||