This is a MIB Module for monitoring the
structures in IPSec-based Virtual Private Networks.
The MIB has been designed to be adopted as an IETF
standard. Hence Cisco-specific features of IPSec
protocol are excluded from this MIB.
Acronyms
The following acronyms are used in this document:
IPSec: Secure IP Protocol
VPN: Virtual Private Network
ISAKMP: Internet Security Association and Key Exchange
Protocol
IKE: Internet Key Exchange Protocol
SA: Security Association
MM: Main Mode - the process of setting up
a Phase 1 SA to secure the exchanges
required to setup Phase 2 SAs
QM: Quick Mode - the process of setting up
Phase 2 Security Associations using
a Phase 1 SA.
Overview of IPsec MIB
The MIB contains six major groups of objects which are
used to manage the IPSec Protocol. These groups include
a Levels Group, a Phase-1 Group, a Phase-2 Group,
a History Group, a Failure Group and a TRAP Control Group.
The following table illustrates the structure of the
IPSec MIB.
The Phase 1 group models objects pertaining to
IKE negotiations and tunnels.
The Phase 2 group models objects pertaining to
IPSec data tunnels.
The History group is to aid applications that do
trending analysis.
The Failure group is to enable an operator to
do troubleshooting and debugging of the VPN Router.
Further, counters are supported to aid Intrusion
Detection.
In addition to the five major MIB Groups, there are
a number of Notifications. The following table
illustrates the name and description of the
IPSec TRAPs.
For a detailed discussion, please refer to the IETF
draft draft-ietf-ipsec-flow-monitoring-mib-00.txt.
Parsed from file CISCO-IPSEC-FLOW-MONITOR-MIB.mib
Module: CISCO-IPSEC-FLOW-MONITOR-MIB
This is a MIB Module for monitoring the
structures in IPSec-based Virtual Private Networks.
The MIB has been designed to be adopted as an IETF
standard. Hence Cisco-specific features of IPSec
protocol are excluded from this MIB.
Acronyms
The following acronyms are used in this document:
IPSec: Secure IP Protocol
VPN: Virtual Private Network
ISAKMP: Internet Security Association and Key Exchange
Protocol
IKE: Internet Key Exchange Protocol
SA: Security Association
MM: Main Mode - the process of setting up
a Phase 1 SA to secure the exchanges
required to setup Phase 2 SAs
QM: Quick Mode - the process of setting up
Phase 2 Security Associations using
a Phase 1 SA.
Overview of IPsec MIB
The MIB contains six major groups of objects which are
used to manage the IPSec Protocol. These groups include
a Levels Group, a Phase-1 Group, a Phase-2 Group,
a History Group, a Failure Group and a TRAP Control Group.
The following table illustrates the structure of the
IPSec MIB.
The Phase 1 group models objects pertaining to
IKE negotiations and tunnels.
The Phase 2 group models objects pertaining to
IPSec data tunnels.
The History group is to aid applications that do
trending analysis.
The Failure group is to enable an operator to
do troubleshooting and debugging of the VPN Router.
Further, counters are supported to aid Intrusion
Detection.
In addition to the five major MIB Groups, there are
a number of Notifications. The following table
illustrates the name and description of the
IPSec TRAPs.
For a detailed discussion, please refer to the IETF
draft draft-ietf-ipsec-flow-monitoring-mib-00.txt.
Parsed from file ipsec-flow.mi2.txt
Company: None
Module: CISCO-IPSEC-FLOW-MONITOR-MIB
This is a MIB Module for monitoring the
structures in IPSec-based Virtual Private Networks.
The MIB has been designed to be adopted as an IETF
standard. Hence Cisco-specific features of IPSec
protocol are excluded from this MIB.
Acronyms
The following acronyms are used in this document:
IPSec: Secure IP Protocol
VPN: Virtual Private Network
ISAKMP: Internet Security Association and Key Exchange
Protocol
IKE: Internet Key Exchange Protocol
SA: Security Association
MM: Main Mode - the process of setting up
a Phase 1 SA to secure the exchanges
required to setup Phase 2 SAs
QM: Quick Mode - the process of setting up
Phase 2 Security Associations using
a Phase 1 SA.
Overview of IPsec MIB
The MIB contains six major groups of objects which are
used to manage the IPSec Protocol. These groups include
a Levels Group, a Phase-1 Group, a Phase-2 Group,
a History Group, a Failure Group and a TRAP Control Group.
The following table illustrates the structure of the
IPSec MIB.
The Phase 1 group models objects pertaining to
IKE negotiations and tunnels.
The Phase 2 group models objects pertaining to
IPSec data tunnels.
The History group is to aid applications that do
trending analysis.
The Failure group is to enable an operator to
do troubleshooting and debugging of the VPN Router.
Further, counters are supported to aid Intrusion
Detection.
In addition to the five major MIB Groups, there are
a number of Notifications. The following table
illustrates the name and description of the
IPSec TRAPs.
For a detailed discussion, please refer to the IETF
draft draft-ietf-ipsec-flow-monitoring-mib-00.txt.
ciscoIpSecFlowMonitorMIB MODULE-IDENTITY LAST-UPDATED "200710240000Z" ORGANIZATION "Tivoli Systems and Cisco Systems" CONTACT-INFO "Tivoli Systems Research Triangle Park, NC Cisco Systems 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This is a MIB Module for monitoring the structures in IPSec-based Virtual Private Networks. The MIB has been designed to be adopted as an IETF standard. Hence Cisco-specific features of IPSec protocol are excluded from this MIB. Acronyms The following acronyms are used in this document: IPSec: Secure IP Protocol VPN: Virtual Private Network ISAKMP: Internet Security Association and Key Exchange Protocol IKE: Internet Key Exchange Protocol SA: Security Association MM: Main Mode - the process of setting up a Phase 1 SA to secure the exchanges required to setup Phase 2 SAs QM: Quick Mode - the process of setting up Phase 2 Security Associations using a Phase 1 SA. Overview of IPsec MIB The MIB contains six major groups of objects which are used to manage the IPSec Protocol. These groups include a Levels Group, a Phase-1 Group, a Phase-2 Group, a History Group, a Failure Group and a TRAP Control Group. The following table illustrates the structure of the IPSec MIB. The Phase 1 group models objects pertaining to IKE negotiations and tunnels. The Phase 2 group models objects pertaining to IPSec data tunnels. The History group is to aid applications that do trending analysis. The Failure group is to enable an operator to do troubleshooting and debugging of the VPN Router. Further, counters are supported to aid Intrusion Detection. In addition to the five major MIB Groups, there are a number of Notifications. The following table illustrates the name and description of the IPSec TRAPs. For a detailed discussion, please refer to the IETF draft draft-ietf-ipsec-flow-monitoring-mib-00.txt." REVISION "200710240000Z" DESCRIPTION "In the description of cipSecTunHistHcInDecompOctets, cipSecTunHcInOctets has been changed to cipSecTunHistHcInOctets. In the description of cipSecTunHistOutUncompOctets, cipSecTunOutOctets has been changed to cipSecTunHistOutOctets. In the description of cipSecTunHistHcOutUncompOctets, cipSecTunHcOutOctets has been changed to cipSecTunHistHcOutOctets. In the description of cipSecTunHistInDecompOctets, cipSecTunInOctets has been changed to cipSecTunHistInOctets." REVISION "200410120000Z" DESCRIPTION "Added two table for media gateway stats information: cikePhase1GWStatsTable (phase-1 IKE) cipSecPhase2GWStatsTable (phase-2 IPsec)" REVISION "200010131800Z" DESCRIPTION "Changed cipSecSpiValue to Unsigned32. Changed Protocol ranges to start at 0 instead of 1. Removed comment(s) incorrectly indicating this MIB was CiscoExperiment." REVISION "200008171259Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 171 }
ciscoIpSecFlowMonitorMIB OBJECT IDENTIFIER ::= { ciscoMgmt 171 }
Vendor: Cisco
Module: CISCO-IPSEC-FLOW-MONITOR-MIB
[Automatically extracted from oidview.com]
ciscoIpSecFlowMonitorMIB MODULE-IDENTITY LAST-UPDATED "200008171259Z" ORGANIZATION "Tivoli Systems and Cisco Systems" CONTACT-INFO "Tivoli Systems Research Triangle Park, NC Cisco Systems 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This is a MIB Module for monitoring the structures in IPSec-based Virtual Private Networks. The MIB has been designed to be adopted as an IETF standard. Hence Cisco-specific features of IPSec protocol are excluded from this MIB. Acronyms The following acronyms are used in this document: IPSec: Secure IP Protocol VPN: Virtual Private Network ISAKMP: Internet Security Association and Key Exchange Protocol IKE: Internet Key Exchange Protocol SA: Security Association MM: Main Mode - the process of setting up a Phase 1 SA to secure the exchanges required to setup Phase 2 SAs QM: Quick Mode - the process of setting up Phase 2 Security Associations using a Phase 1 SA. Overview of IPsec MIB The MIB contains six major groups of objects which are used to manage the IPSec Protocol. These groups include a Levels Group, a Phase-1 Group, a Phase-2 Group, a History Group, a Failure Group and a TRAP Control Group. The following table illustrates the structure of the IPSec MIB. The Phase 1 group models objects pertaining to IKE negotiations and tunnels. The Phase 2 group models objects pertaining to IPSec data tunnels. The History group is to aid applications that do trending analysis. The Failure group is to enable an operator to do troubleshooting and debugging of the VPN Router. Further, counters are supported to aid Intrusion Detection. In addition to the five major MIB Groups, there are a number of Notifications. The following table illustrates the name and description of the IPSec TRAPs. For a detailed discussion, please refer to the IETF draft draft-ietf-ipsec-flow-monitoring-mib-00.txt. " ::= { ciscoMgmt 171 }
ciscoIpSecFlowMonitorMIB MODULE-IDENTITY LAST-UPDATED "200710240000Z" ORGANIZATION "Tivoli Systems and Cisco Systems" CONTACT-INFO "Tivoli Systems Research Triangle Park, NC Cisco Systems 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This is a MIB Module for monitoring the structures in IPSec-based Virtual Private Networks. The MIB has been designed to be adopted as an IETF standard. Hence Cisco-specific features of IPSec protocol are excluded from this MIB. Acronyms The following acronyms are used in this document: IPSec: Secure IP Protocol VPN: Virtual Private Network ISAKMP: Internet Security Association and Key Exchange Protocol IKE: Internet Key Exchange Protocol SA: Security Association MM: Main Mode - the process of setting up a Phase 1 SA to secure the exchanges required to setup Phase 2 SAs QM: Quick Mode - the process of setting up Phase 2 Security Associations using a Phase 1 SA. Overview of IPsec MIB The MIB contains six major groups of objects which are used to manage the IPSec Protocol. These groups include a Levels Group, a Phase-1 Group, a Phase-2 Group, a History Group, a Failure Group and a TRAP Control Group. The following table illustrates the structure of the IPSec MIB. The Phase 1 group models objects pertaining to IKE negotiations and tunnels. The Phase 2 group models objects pertaining to IPSec data tunnels. The History group is to aid applications that do trending analysis. The Failure group is to enable an operator to do troubleshooting and debugging of the VPN Router. Further, counters are supported to aid Intrusion Detection. In addition to the five major MIB Groups, there are a number of Notifications. The following table illustrates the name and description of the IPSec TRAPs. For a detailed discussion, please refer to the IETF draft draft-ietf-ipsec-flow-monitoring-mib-00.txt." REVISION "200710240000Z" DESCRIPTION "In the description of cipSecTunHistHcInDecompOctets, cipSecTunHcInOctets has been changed to cipSecTunHistHcInOctets. In the description of cipSecTunHistOutUncompOctets, cipSecTunOutOctets has been changed to cipSecTunHistOutOctets. In the description of cipSecTunHistHcOutUncompOctets, cipSecTunHcOutOctets has been changed to cipSecTunHistHcOutOctets. In the description of cipSecTunHistInDecompOctets, cipSecTunInOctets has been changed to cipSecTunHistInOctets." REVISION "200410120000Z" DESCRIPTION "Added two table for media gateway stats information: cikePhase1GWStatsTable (phase-1 IKE) cipSecPhase2GWStatsTable (phase-2 IPsec)" REVISION "200010131800Z" DESCRIPTION "Changed cipSecSpiValue to Unsigned32. Changed Protocol ranges to start at 0 instead of 1. Removed comment(s) incorrectly indicating this MIB was CiscoExperiment." REVISION "200008171259Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 171 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.171.1 | cipSecMIBObjects | 6 | 478 | None |
1.3.6.1.4.1.9.9.171.2 | cipSecMIBNotificationPrefix | 1 | 14 | None |
1.3.6.1.4.1.9.9.171.3 | cipSecMIBConformance | 2 | 12 | None |
To many brothers! Only 100 nearest brothers are shown.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
... | ||||
1.3.6.1.4.1.9.9.121 | ciscoAtmNetworkClockMIB | 3 | 53 | The MIB module for management of network clock distribution and the Network Clock Distribution Protocol (NCDP) in Cisco de… |
1.3.6.1.4.1.9.9.122 | ciscoCasaMIB | 3 | 78 | This MIB contains the basic objects for managing a Cisco Appliance Services Architecture (CASA) Entity. A CASA Entity can be a Ma… |
1.3.6.1.4.1.9.9.124 | ciscoCallResourcePoolMIB | 3 | 114 | The MIB module for call resource pool management. This MIB supports the resource pool manager feature of CISCO IOS. This feature … |
1.3.6.1.4.1.9.9.125 | ciscoWANRsrcPartMIB | 2 | 55 | The MIB module to manage resource partition objects. A resource partition is configured on a virtual interface (ifType value atmV… |
1.3.6.1.4.1.9.9.126 | ciscoSonetMIB | 3 | 136 | The MIB module to describe SONET/SDH interfaces objects. This is an extension to the standard SONET MIB(RFC 2558). |
1.3.6.1.4.1.9.9.128 | ciscoVlanIfTableRelationshipMIB | 1 | 12 | ciscoVlanIftableRelationshipMIB |
1.3.6.1.4.1.9.9.129 | ciscoAtmVirtualIfMIB | 2 | 139 | The MIB module to manage ATM Virtual interface objects. ATM virtual interfaces are configured on a physical line. |
1.3.6.1.4.1.9.9.130 | ciscoAdslDmtLineMIB | 3 | 72 | This MIB module serves as an enterprise-specific extension of the ADSL-LINE-MIB. The structure of this MIB module shadows the st… |
1.3.6.1.4.1.9.9.131 | ciscoSystemMIB | 3 | 57 | The systemGroup (see RFC 1907) provides a standard set of basic system information. This MIB module contains Cisco-defined exten… |
1.3.6.1.4.1.9.9.132 | ciscoDs3MIB | 2 | 140 | The MIB module to describe DS3 line objects. This is an extension to the standard DS3 MIB(RFC 2496). |
1.3.6.1.4.1.9.9.133 | ciscoAtmCellLayerMIB | 1 | 138 | The MIB module to describe ATM cell layer objects and statistics of a physical line. |
1.3.6.1.4.1.9.9.134 | ciscoClusterMIB | 3 | 49 | The MIB module for the management of a group of devices called a 'cluster'. A cluster comprises: 1. A command switch, which is a… |
1.3.6.1.4.1.9.9.135 | ciscoWirelessP2pBpiMIB | 3 | 66 | This is the MIB Module for the Baseline Privacy Interface (BPI) at Point to Point Wireless Radio Card. This is a specialization o… |
1.3.6.1.4.1.9.9.136 | ciscoWirelessIfMIB | 3 | 307 | This is the MIB Module for the Cisco Wireless Radio Point to Point interface specification. I) Relationship of the Cisco Wireless… |
1.3.6.1.4.1.9.9.137 | ciscoWirelessTextualConventions | 0 | 0 | This module defines textual conventions used in Cisco Wireless MIBs. |
1.3.6.1.4.1.9.9.138 | ciscoEntityAlarmMIB | 3 | 66 | This MIB module defines the managed objects that support the monitoring of alarms generated by physical entities contained by the… |
1.3.6.1.4.1.9.9.139 | ciscoEntityProvMIB | 3 | 13 | This MIB module defines the objects that support provisioning of 'container' class physical entities. Provisioning sets up a 'co… |
1.3.6.1.4.1.9.9.140 | ciscoCopsClientMIB | 3 | 43 | This MIB module is for configuration & statistic query of Common Open Policy Service(COPS) client feature on the Cisco device. C… |
1.3.6.1.4.1.9.9.141 | ciscoVSIControllerMIB | 2 | 21 | This MIB module is used for configuring ATM Capable Switch to be aware of VSI Controller information. Terminolgies used: VSI … |
1.3.6.1.4.1.9.9.144 | ciscoTransactionConnectionMIB | 2 | 66 | The MIB module for retrieving Cisco Transaction Connection configuration and status. Cisco Transaction Connection routes transac… |
1.3.6.1.4.1.9.9.145 | ciscoWanModuleMIB | 3 | 32 | The MIB to configure Connection Specific parameters and statistics related information in a Service Module. The Service Module(SM… |
1.3.6.1.4.1.9.9.146 | ciscoCallApplicationMIB | 2 | 548 | This MIB allows management of call applications on a network device. A 'call application' is a software module that processes cal… |
1.3.6.1.4.1.9.9.147 | ciscoFirewallMIB | 3 | 75 | MIB module for monitoring Cisco Firewalls. |
1.3.6.1.4.1.9.9.148 | ciscoBgpPolAcctMIB | 2 | 15 | BGP policy based accounting information |
1.3.6.1.4.1.9.9.149 | ciscoAdslLineCapMIB | 3 | 46 | This MIB module serves as an enterprise-specific extension of the ADSL-LINE-MIB. The structure of this MIB module shadows the st… |
1.3.6.1.4.1.9.9.150 | ciscoAAASessionMIB | 3 | 31 | This MIB module provides data for accounting sessions based on Authentication, Authorization, Accounting (AAA) protocols. Referenc… |
1.3.6.1.4.1.9.9.151 | ciscoL2L3IfConfigMIB | 2 | 11 | Interface switchport mode configuration management MIB. This MIB is used to monitor and control configuration of interface switch… |
1.3.6.1.4.1.9.9.152 | ciscoSipUaMIB | 4 | 504 | Cisco User Agent Session Initiation Protocol (SIP) MIB module. SIP is an application-layer signalling protocol for creating, mod… |
1.3.6.1.4.1.9.9.154 | ciscoIdslLineMIB | 3 | 148 | This MIB module describes IDSL (ISDN Digital Line Subscriber) line interfaces. The structure of this module resembles that of th… |
1.3.6.1.4.1.9.9.155 | ciscoSdslLineMIB | 3 | 170 | This MIB module describes all variations of the symmetric DSL line interfaces. The structure of this module resembles and mainta… |
1.3.6.1.4.1.9.9.156 | ciscoCcmMIB | 3 | 487 | The MIB Module for the management of a Cisco Unified Communications Manager (CUCM) application running with a Cisco Communication… |
1.3.6.1.4.1.9.9.157 | ciscoCdmaPdsnMIB | 3 | 984 | This MIB is to support the CDMA PDSN (Packet Data Serving Node) feature. A CDMA2000 network supports wireless data communication… |
1.3.6.1.4.1.9.9.158 | ciscoAAAClientMIB | 3 | 25 | This MIB module provides data for authentication method priority based on Authentication, Authorization, Accounting (AAA) protoco… |
1.3.6.1.4.1.9.9.159 | ciscoQosPolicyConfigMIB | 3 | 35 | This MIB module defines managed objects that support the policy source configuration of Quality of Service (QoS) on the device. T… |
1.3.6.1.4.1.9.9.160 | ciscoCircuitInterfaceMIB | 2 | 11 | The MIB module to configure the circuit description for an interface. The circuit description can be used to describe and identify… |
1.3.6.1.4.1.9.9.161 | ciscoSlbMIB | 3 | 279 | The MIB for managing Server Load Balancing Manager(s), such as the Cisco IOS SLB product. This MIB includes instrumentation for t… |
1.3.6.1.4.1.9.9.162 | ciscoVsiMasterMIB | 3 | 100 | This MIB module contains objects related to the master side of the Virtual Switch Interface protocol used for control of ATM swit… |
1.3.6.1.4.1.9.9.163 | ciscoCallTrackerMIB | 3 | 104 | CISCO-CALL-TRACKER-MIB |
1.3.6.1.4.1.9.9.164 | ciscoCallTrackerTCPMIB | 3 | 25 | This MIB module provides TCP service connection related data for tracking the progress and status of a call. This module extends t… |
1.3.6.1.4.1.9.9.165 | ciscoCallTrackerModemMIB | 3 | 97 | This MIB module provides modem call related data for tracking the progress and status of a call. This module extends tables defin… |
1.3.6.1.4.1.9.9.166 | ciscoCBQosMIB | 2 | 544 | Cisco Class-Based QoS MIB ********************************** Overview ********************************** This MIB provides read acc… |
1.3.6.1.4.1.9.9.167 | ciscoWirelessDocsIfMib | 3 | 140 | This is the MIB Module for MCNS compliant Radio Frequency (RF) interfaces in wireless point-to-multipoint subscriber units (SU) a… |
1.3.6.1.4.1.9.9.168 | ciscoNtpMIB | 3 | 87 | This MIB module defines a MIB which provides mechanisms to monitor an NTP server. The MIB is derived from the Technical Report #Ma… |
1.3.6.1.4.1.9.9.169 | ciscoWirelessDocsExtMIB | 3 | 99 | This MIB module defines Cisco-specific objects that add to the functionality defined in CISCO-WIRELESS-DOCS-IF-MIB. These objects … |
1.3.6.1.4.1.9.9.170 | ciscoWirelessPhyMIB | 2 | 112 | This is the MIB Module for the Cisco Wireless Radio Point to MultiPoint interface. |
1.3.6.1.4.1.9.9.172 | ciscoIpSecPolMapMIB | 3 | 21 | The MIB module maps the IPSec entities created dynamically to the policy entities that caused them. This is an appendix to the IPS… |
1.3.6.1.4.1.9.9.173 | ciscoPrivateVlanMIB | 2 | 56 | The MIB module to support Private VLAN feature on Cisco's switching devices. |
1.3.6.1.4.1.9.9.174 | ciscoMobileIpMIB | 3 | 533 | An extension to the IETF MIB module defined in RFC-2006 for managing Mobile IP implementations. Mobile IP introduces the followin… |
1.3.6.1.4.1.9.9.175 | ciscoIfLinkConfigMIB | 2 | 15 | The MIB module for configuration of bulk distribution (de-multiplexing of traffic from higher-bandwidth to lower-bandwidth interf… |
1.3.6.1.4.1.9.9.176 | ciscoRFMIB | 3 | 117 | This MIB provides configuration control and status for the Redundancy Framework (RF) subsystem. RF provides a mechanism for logic… |
1.3.6.1.4.1.9.9.177 | ciscoSaaApmMIB | 3 | 38 | Acronyms and Terms: SAA - Service Assurance Agent APM - Application Performance Monitoring A MIB for controlling SAA APM. APM provi… |
1.3.6.1.4.1.9.9.178 | ciscoContentEngineMIB | 3 | 263 | The MIB module for the Cisco Content Engine from Cisco Systems, Inc. |
1.3.6.1.4.1.9.9.179 | ciscoCatOSAclQosMIB | 3 | 470 | This MIB module is for Access Control Lists(ACLs) configuration of Quality of Service (QoS) as well as Security feature on the Ci… |
1.3.6.1.4.1.9.9.180 | ciscoWirelessRfMetricsMIB | 5 | 99 | This is the MIB Module for the Cisco Wireless Radio Point to MultiPoint interface specification. |
1.3.6.1.4.1.9.9.181 | ciscoWirelessLinkMetricsMIB | 4 | 141 | This is the MIB Module for the Cisco Wireless Radio Point to MultiPoint interface link metrics specification. Glossary The followin… |
1.3.6.1.4.1.9.9.183 | ciscoGprsAccPtMIB | 3 | 338 | This MIB module supports access point configuration for GGSN in a GPRS system. GPRS [1] is a GSM network providing mobile wireles… |
1.3.6.1.4.1.9.9.184 | ciscoPimMIB | 3 | 36 | This MIB module defines the cisco specific variables for Protocol Independent Multicast (PIM) management. These definitions are a… |
1.3.6.1.4.1.9.9.185 | ciscoBertMIB | 2 | 46 | The MIB module to configure and perform Bit Error Rate Testing (BERT) on DS3, DS1/E1 and DS0/DS0Bundle interfaces. Bit error rate… |
1.3.6.1.4.1.9.9.187 | ciscoBgp4MIB | 4 | 137 | An extension to the IETF BGP4 MIB module defined in RFC 1657. Following is the terminology associated with Border Gateway Protocol… |
1.3.6.1.4.1.9.9.188 | cGtpMIB | 3 | 248 | This MIB module manages the GPRS Tunnelling Protocol (GTP) on GGSN and SGSN. GPRS provides wireless access to packet data network… |
1.3.6.1.4.1.9.9.189 | ciscoPortQosMIB | 3 | 114 | Cisco PORT QOS MIB - Overview This MIB module is for the management of Cisco's per port rate-limiting and traffic shaping on L3 sw… |
1.3.6.1.4.1.9.9.190 | ciscoVoiceAppsMIB | 3 | 40 | The MIB Module for the management of Cisco Voice Applications. This MIB is designed to work in conjunction with the SYSAPPL-MIB … |
1.3.6.1.4.1.9.9.191 | ciscoIpUplinkRedirectMIB | 3 | 11 | This MIB module is for the configuration of Cisco IP Uplink Redirect feature. |
1.3.6.1.4.1.9.9.192 | ciscoGprsChargingMIB | 3 | 315 | This MIB module manages the charging related function on the GGSN node of a GPRS system. The following diagram illustrates a simp… |
1.3.6.1.4.1.9.9.194 | ciscoPppoeMIB | 3 | 89 | Cisco PPPoE sessions management MIB Module. |
1.3.6.1.4.1.9.9.195 | ciscoEntityExtMIB | 3 | 64 | This MIB is an extension of the ENTITY-MIB specified in RFC2737. This MIB module contains Cisco-defined extensions to the entit… |
1.3.6.1.4.1.9.9.197 | ciscoDistDirMIB | 3 | 123 | Cisco Distributed Director MIB. The Cisco Distributed Director provides global Internet scalability and increased performance as … |
1.3.6.1.4.1.9.9.198 | ciscoRfSupMIB | 3 | 58 | This MIB was designed to complement the CISCO-RF-MIB by providing additional optional status and configuration control for redund… |
1.3.6.1.4.1.9.9.199 | ciscoSmFileDownloadMIB | 3 | 23 | The MIB module for downloading files to the Service Modules specifically designed for an architecture containing a controller car… |
1.3.6.1.4.1.9.9.201 | ciscoSwitchUsageMIB | 3 | 15 | This MIB defines objects related to statistics for the usage of switch fabric. The switch fabric is used by the incoming packets … |
1.3.6.1.4.1.9.9.202 | ciscoOscpMIB | 3 | 52 | The MIB module for managing the Cisco Optical Supervisory Channel Protocol (OSCP). The OSCP is used to determine and maintain wav… |
1.3.6.1.4.1.9.9.204 | ciscoXdslLineMIB | 2 | 32 | The tables defined by this MIB module contain a collection of managed objects that are general in nature and apply to different t… |
1.3.6.1.4.1.9.9.215 | ciscoMacNotificationMIB | 3 | 72 | This MIB module is for configuration of the MAC notification feature. MAC notification is a mechanism to inform monitoring device… |
1.3.6.1.4.1.9.9.216 | ciscoContentNetworkMIB | 3 | 34 | This MIB module defines objects for Content Network devices. A Content Network is a collection of devices that optimizes the deli… |
1.3.6.1.4.1.9.9.217 | ciscoCat6kCrossbarMIB | 3 | 210 | The Catalyst 6000 Crossbar MIB provides instrumentation for configuration and operation of the crossbar switching fabric module, … |
1.3.6.1.4.1.9.9.218 | ciscoIfThresholdMIB | 3 | 65 | ciscoIfthresholdMIB |
1.3.6.1.4.1.9.9.219 | ciscoVoiceDnisMIB | 3 | 24 | The MIB module provides management support for Dialer Number Information Service (DNIS) mapping. A DNIS entry is associated with… |
1.3.6.1.4.1.9.9.220 | ciscoPaeMIB | 3 | 231 | Cisco Port Access Entity (PAE) module for managing IEEE Std 802.1x. This MIB provides Port Access Entity information that are eith… |
1.3.6.1.4.1.9.9.221 | ciscoEnhancedMemPoolMIB | 3 | 87 | New MIB module for monitoring the memory pools of all physical entities on a managed system. |
... |