Reference record for OID 1.3.6.1.4.1.9.9.195

parent

1.3.6.1.4.1.9.9 (ciscoMgmt)

node code

195

node name

ciscoEntityExtMIB

dot oid

1.3.6.1.4.1.9.9.195

type

OBJECT IDENTIFIER

asn1 oid

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoEntityExtMIB(195)}

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoEntityExtMIB(195)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoEntityExtMIB(195)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoEntityExtMIB(195)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoEntityExtMIB(195)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoEntityExtMIB(195)}

iri oid

/iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoEntityExtMIB

/iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoEntityExtMIB

/iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoEntityExtMIB

/iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoEntityExtMIB

/iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoEntityExtMIB

/iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoEntityExtMIB

iri by oid_info

/ISO/Identified-Organization/6/1/4/1/9/9/195

Description by circitor

This MIB is an extension of the ENTITY-MIB
specified in RFC2737.

This MIB module contains Cisco-defined extensions
to the entityPhysicalTable to represent information
related to entities of class module(entPhysicalClass
= 'module') which have a Processor.

A processor module is defined as a physical entity
that has a CPU, RAM and NVRAM so that
it can independently
- load a bootable image
- save configuration.
This module is the entry point for external
applications like SNMP Manager, CLI, FTP etc.

Line card is an interface card with at least a
Processor and RAM. This might be referred to as
Service Module in some cisco products.

A configuration register is a 16 bit
software register.
The configuration register is mainly used to
check for instructions on where to find the Cisco
Operating System software.
Some other functions of configuration register are:
- To select a boot source and default boot filename.
- To enable or disable the Break function.
- To control broadcast addresses.
- To set the console terminal baud rate.
- To load operating software from Flash memory.
- To allow us to manually boot the system using the
boot command at the bootstrap program prompt.

Booting is the process of initializing the
hardware and starting the Operating System.

Parsed from file CISCO-ENTITY-EXT-MIB.mib
Module: CISCO-ENTITY-EXT-MIB

Description by mibdepot

This MIB is an extension of the ENTITY-MIB
specified in RFC2737.

This MIB module contains Cisco-defined extensions
to the entityPhysicalTable to represent information
related to entities of class module(entPhysicalClass
= 'module') which have a Processor.

A processor module is defined as a physical entity
that has a CPU, RAM and NVRAM so that
it can independently
- load a bootable image
- save configuration.
This module is the entry point for external
applications like SNMP Manager, CLI, FTP etc.

Line card is an interface card with at least a
Processor and RAM. This might be referred to as
Service Module in some cisco products.

A configuration register is a 16 bit
software register.
The configuration register is mainly used to
check for instructions on where to find the Cisco
Operating System software.
Some other functions of configuration register are:
- To select a boot source and default boot filename.
- To enable or disable the Break function.
- To control broadcast addresses.
- To set the console terminal baud rate.
- To load operating software from Flash memory.
- To allow us to manually boot the system using the
boot command at the bootstrap program prompt.

Booting is the process of initializing the
hardware and starting the Operating System.

Parsed from file CISCO-ENTITY-EXT-MIB.my.txt
Company: None
Module: CISCO-ENTITY-EXT-MIB

Description by cisco

This MIB is an extension of the ENTITY-MIB
specified in RFC2737.

This MIB module contains Cisco-defined extensions
to the entityPhysicalTable to represent information
related to entities of class module(entPhysicalClass
= 'module') which have a Processor.

A processor module is defined as a physical entity
that has a CPU, RAM and NVRAM so that
it can independently
- load a bootable image
- save configuration.
This module is the entry point for external
applications like SNMP Manager, CLI, FTP etc.

Line card is an interface card with at least a
Processor and RAM. This might be referred to as
Service Module in some cisco products.

A configuration register is a 16 bit
software register.
The configuration register is mainly used to
check for instructions on where to find the Cisco
Operating System software.
Some other functions of configuration register are:
- To select a boot source and default boot filename.
- To enable or disable the Break function.
- To control broadcast addresses.
- To set the console terminal baud rate.
- To load operating software from Flash memory.
- To allow us to manually boot the system using the
boot command at the bootstrap program prompt.

Booting is the process of initializing the
hardware and starting the Operating System.

Information by circitor

ciscoEntityExtMIB MODULE-IDENTITY
    LAST-UPDATED    "200811240000Z"
    ORGANIZATION    "Cisco Systems, Inc."
    CONTACT-INFO
            "Cisco Systems
            Customer Service

            Postal: 170 W. Tasman Drive
            San Jose, CA 95134
            USA

            Tel: +1 800 553-NETS

            E-mail: [email protected]"
    DESCRIPTION
        "This MIB is an extension of the ENTITY-MIB
        specified in RFC2737.

        This MIB module contains  Cisco-defined  extensions 
        to the  entityPhysicalTable to represent information
        related to entities of class module(entPhysicalClass
        = 'module') which have a Processor.

        A processor module is defined as a physical entity
        that has a CPU, RAM and NVRAM  so that
        it can independently
           - load a bootable image
           - save configuration.
        This module is the entry point for external
        applications like SNMP Manager, CLI, FTP etc.

        Line card is an interface card         with at least a 
        Processor and RAM. This might be referred to as 
        Service Module in some cisco products.

        A configuration register is  a 16 bit 
        software register.
        The configuration register is mainly used to 
        check for instructions on where to find the Cisco 
        Operating System software.
        Some other functions of configuration register are:
         - To select a boot source and default boot filename.
         - To enable or disable the Break function.
         - To control broadcast addresses.
         - To set the console terminal baud rate.
         - To load operating software from Flash memory.
         - To allow us to manually boot the system using the 
           boot command at the bootstrap program prompt.

        Booting is the process of initializing the
        hardware and starting the Operating System."
    REVISION        "200811240000Z"
    DESCRIPTION
        "Added following new objects to ceExtPhysicalProcessorTable.
        ceExtProcessorRamOverflow and ceExtHCProcessorRam

        Added following new groups to ciscoEntityExtMIBGroups.
        ceExtPhyProcessorOverflowGroup and ceExtPhyProcessorHCGroup.

        Added a new compliance ciscoEntityExtMIBComplianceRev3 which
        deprecates ciscoEntityExtMIBComplianceRev2."
    REVISION        "200407060000Z"
    DESCRIPTION
        "Added a new table object 'ceExtEntPhysicalTable' ."
    REVISION        "200403030000Z"
    DESCRIPTION
        "Importing Unsigned32 from SNMPv2-SMI, instead of CISCO-TC."
    REVISION        "200401260000Z"
    DESCRIPTION
        "Added new enum to ceExtEntityLEDType."
    REVISION        "200308240000Z"
    DESCRIPTION
        "Added ceExtEntityLEDTable.  Added ceExtKickstartImageList to
        ceExtConfigRegTable.
        Added new group ciscoEntityExtLEDGroup.
        Added group ceExtSysBootImageListGroupRev1."
    REVISION        "200105170000Z"
    DESCRIPTION
        "Corrected the description for the TC
        ConfigRegisterValue."
    REVISION        "200104050000Z"
    DESCRIPTION
        "Initial version of this MIB module."
    ::= { ciscoMgmt 195 }

Information by cisco_v1

ciscoEntityExtMIB OBJECT IDENTIFIER ::= { ciscoMgmt 195 }

Information by oid_info

Vendor: Cisco
Module: CISCO-ENTITY-EXT-MIB

[Automatically extracted from oidview.com]

Information by mibdepot

ciscoEntityExtMIB MODULE-IDENTITY
    LAST-UPDATED    "200811240000Z"
    ORGANIZATION    "Cisco Systems, Inc."
    CONTACT-INFO
            "Cisco Systems
            Customer Service

            Postal: 170 W. Tasman Drive
            San Jose, CA 95134
            USA

            Tel: +1 800 553-NETS

            E-mail: [email protected]"
    DESCRIPTION
        "This MIB is an extension of the ENTITY-MIB
        specified in RFC2737.

        This MIB module contains  Cisco-defined  extensions 
        to the  entityPhysicalTable to represent information
        related to entities of class module(entPhysicalClass
        = 'module') which have a Processor.

        A processor module is defined as a physical entity
        that has a CPU, RAM and NVRAM  so that
        it can independently
           - load a bootable image
           - save configuration.
        This module is the entry point for external
        applications like SNMP Manager, CLI, FTP etc.

        Line card is an interface card         with at least a 
        Processor and RAM. This might be referred to as 
        Service Module in some cisco products.

        A configuration register is  a 16 bit 
        software register.
        The configuration register is mainly used to 
        check for instructions on where to find the Cisco 
        Operating System software.
        Some other functions of configuration register are:
         - To select a boot source and default boot filename.
         - To enable or disable the Break function.
         - To control broadcast addresses.
         - To set the console terminal baud rate.
         - To load operating software from Flash memory.
         - To allow us to manually boot the system using the 
           boot command at the bootstrap program prompt.

        Booting is the process of initializing the
        hardware and starting the Operating System."
    REVISION        "200811240000Z"
    DESCRIPTION
        "Added following new objects to ceExtPhysicalProcessorTable.
        ceExtProcessorRamOverflow and ceExtHCProcessorRam

        Added following new groups to ciscoEntityExtMIBGroups.
        ceExtPhyProcessorOverflowGroup and ceExtPhyProcessorHCGroup.

        Added a new compliance ciscoEntityExtMIBComplianceRev3 which
        deprecates ciscoEntityExtMIBComplianceRev2."
    REVISION        "200407060000Z"
    DESCRIPTION
        "Added a new table object 'ceExtEntPhysicalTable' ."
    REVISION        "200403030000Z"
    DESCRIPTION
        "Importing Unsigned32 from SNMPv2-SMI, instead of CISCO-TC."
    REVISION        "200401260000Z"
    DESCRIPTION
        "Added new enum to ceExtEntityLEDType."
    REVISION        "200308240000Z"
    DESCRIPTION
        "Added ceExtEntityLEDTable.  Added ceExtKickstartImageList to
        ceExtConfigRegTable.
        Added new group ciscoEntityExtLEDGroup.
        Added group ceExtSysBootImageListGroupRev1."
    REVISION        "200105170000Z"
    DESCRIPTION
        "Corrected the description for the TC
        ConfigRegisterValue."
    REVISION        "200104050000Z"
    DESCRIPTION
        "Initial version of this MIB module."
    ::= { ciscoMgmt 195 }

Information by cisco

ciscoEntityExtMIB MODULE-IDENTITY
    LAST-UPDATED    "201504170000Z"
    ORGANIZATION    "Cisco Systems, Inc."
    CONTACT-INFO
            "Cisco Systems
            Customer Service

            Postal: 170 W. Tasman Drive
            San Jose, CA 95134
            USA

            Tel: +1 800 553-NETS

            E-mail: [email protected]"
    DESCRIPTION
        "This MIB is an extension of the ENTITY-MIB
        specified in RFC2737.

        This MIB module contains  Cisco-defined  extensions 
        to the  entityPhysicalTable to represent information
        related to entities of class module(entPhysicalClass
        = 'module') which have a Processor.

        A processor module is defined as a physical entity
        that has a CPU, RAM and NVRAM  so that
        it can independently
           - load a bootable image
           - save configuration.
        This module is the entry point for external
        applications like SNMP Manager, CLI, FTP etc.

        Line card is an interface card         with at least a 
        Processor and RAM. This might be referred to as 
        Service Module in some cisco products.

        A configuration register is  a 16 bit 
        software register.
        The configuration register is mainly used to 
        check for instructions on where to find the Cisco 
        Operating System software.
        Some other functions of configuration register are:
         - To select a boot source and default boot filename.
         - To enable or disable the Break function.
         - To control broadcast addresses.
         - To set the console terminal baud rate.
         - To load operating software from Flash memory.
         - To allow us to manually boot the system using the 
           boot command at the bootstrap program prompt.

        Booting is the process of initializing the
        hardware and starting the Operating System."
    REVISION        "201504170000Z"
    DESCRIPTION
        "Added ceExtUSBModemTable,
        ceExtUSBModemPlugInNotif, ceExtUSBModemPlugOutNotif,
        ceExtEntUsbModemNotifEnable."
    REVISION        "201409120000Z"
    DESCRIPTION
        "Changed the description ceExtEntDoorOpenNotif to
        include ceExtEntDoorOpenNotif instead 
        of ceExtEntDoorCloseNotif."
    REVISION        "201403270000Z"
    DESCRIPTION
        "Changed the Max Access of ceExtEntDoorNotifEnable from
        read-only to read-write."
    REVISION        "201308060000Z"
    DESCRIPTION
        "Added following object to ciscoEntityExtMIBNotifications
        ceExtBreakOutPortInserted
        ceExtBreakOutPortRemoved

        Added following object to ceExtNotificationControlObjects
        ceExtBreakOutPortNotifEnable

        Added the following new groups to ciscoEntityExtMIBGroups
        ceExtBreakOutPortNotifGroup
        ceExtBreakOutPortNotifControlGroup.

        Added a new compliance ciscoEntityExtMIBComplianceRev5 which
        deprecates ciscoEntityExtMIBComplianceRev4

        A port can be configured to act as multiple interfaces.
        Ex: One Hundred GigE port can act as 10 TenGigE interface
        Breakout is the term that can be used to define this behaviour.
        Alternatively slice term is also used. 

        When a breakout config is applied on the interface, the base 
        interface will be replaced with multiple breakout interfaces. 
        Reference to the base interface will be removed from the system 
        and breakout interface will be made available. Vice versa will 
        happen when breakout config will be removed from the system."
    REVISION        "201308050000Z"
    DESCRIPTION
        "Added following new objects to ciscoEntityExtMIBNotifications.
        ceExtEntDoorCloseNotif
        ceExtEntDoorOpenNotif

        Added following new groups to ciscoEntityExtMIBGroups.
        ceExtNotificationControlObjects.

        Added following new objects to ceExtNotificationControlObjects
        ceExtEntDoorNotifEnable.

        Added the following new groups to ciscoEntityExtMIBGroups
        ceExtEntDoorNotifGroup
        ceExtEntDoorNotifControlGroup.

        Added a new compliance ciscoEntityExtMIBComplianceRev4 which
        deprecates ciscoEntityExtMIBComplianceRev3."
    REVISION        "200811240000Z"
    DESCRIPTION
        "Added following new objects to ceExtPhysicalProcessorTable.
        ceExtProcessorRamOverflow and ceExtHCProcessorRam

        Added following new groups to ciscoEntityExtMIBGroups.
        ceExtPhyProcessorOverflowGroup and ceExtPhyProcessorHCGroup.

        Added a new compliance ciscoEntityExtMIBComplianceRev3 which
        deprecates ciscoEntityExtMIBComplianceRev2."
    REVISION        "200407060000Z"
    DESCRIPTION
        "Added a new table object 'ceExtEntPhysicalTable' ."
    REVISION        "200403030000Z"
    DESCRIPTION
        "Importing Unsigned32 from SNMPv2-SMI, instead of CISCO-TC."
    REVISION        "200401260000Z"
    DESCRIPTION
        "Added new enum to ceExtEntityLEDType."
    REVISION        "200308240000Z"
    DESCRIPTION
        "Added ceExtEntityLEDTable.  Added ceExtKickstartImageList to
        ceExtConfigRegTable.
        Added new group ciscoEntityExtLEDGroup.
        Added group ceExtSysBootImageListGroupRev1."
    REVISION        "200105170000Z"
    DESCRIPTION
        "Corrected the description for the TC
        ConfigRegisterValue."
    REVISION        "200104050000Z"
    DESCRIPTION
        "Initial version of this MIB module."
    ::= { ciscoMgmt 195 }

First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

Greg Satz

Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

Cisco Systems, Inc.

Children (3)

Brothers (645)

To many brothers! Only 100 nearest brothers are shown.