Reference record for OID 1.3.6.1.4.1.9.9.181

parent

1.3.6.1.4.1.9.9 (ciscoMgmt)

node code

181

node name

ciscoWirelessLinkMetricsMIB

dot oid

1.3.6.1.4.1.9.9.181

type

OBJECT IDENTIFIER

asn1 oid

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoWirelessLinkMetricsMIB(181)}

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoWirelessLinkMetricsMIB(181)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoWirelessLinkMetricsMIB(181)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoWirelessLinkMetricsMIB(181)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoWirelessLinkMetricsMIB(181)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoWirelessLinkMetricsMIB(181)}

iri oid

/iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoWirelessLinkMetricsMIB

/iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoWirelessLinkMetricsMIB

/iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoWirelessLinkMetricsMIB

/iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoWirelessLinkMetricsMIB

/iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoWirelessLinkMetricsMIB

/iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoWirelessLinkMetricsMIB

iri by oid_info

/ISO/Identified-Organization/6/1/4/1/9/9/181

Description by circitor

This is the MIB Module for the Cisco Wireless Radio
Point to MultiPoint interface link metrics
specification.

Glossary

The following terms are used in the MIB definitions below.

Radio Interface: The interface that provides wireless communication
features.
Radio Link: The bi-directional wireless link between two
communicating wireless radios.
Radio PHY: Represents the transmission characteristics of the
Radio link.

Link Admin Up: This is the system time when the link is configured
to be 'administratively up'. The user can configure
the link to be up either by executing a 'no shut'
command via the CLI or by setting the ifAdminStatus
object in the IF-MIB to 'up(1)' via SNMP.

Cisco Wireless MIB Organization

The Cisco Wireless Point to Multipoint Radio Link Metrics MIB is
divided into 2 main groups.

Head End: These objects are supported on the Head End only.
Subscriber Unit: These objects are supported on the Subscriber
unit only.

Parsed from file CISCO-WIRELESS-P2MP-LINK-METRICS-MIB.mib
Module: CISCO-WIRELESS-P2MP-LINK-METRICS-MIB

Description by mibdepot

This is the MIB Module for the Cisco Wireless Radio
Point to MultiPoint interface link metrics
specification.

Glossary

The following terms are used in the MIB definitions below.

Radio Interface: The interface that provides wireless communication
features.
Radio Link: The bi-directional wireless link between two
communicating wireless radios.
Radio PHY: Represents the transmission characteristics of the
Radio link.

Link Admin Up: This is the system time when the link is configured
to be 'administratively up'. The user can configure
the link to be up either by executing a 'no shut'
command via the CLI or by setting the ifAdminStatus
object in the IF-MIB to 'up(1)' via SNMP.

Cisco Wireless MIB Organization

The Cisco Wireless Point to Multipoint Radio Link Metrics MIB is
divided into 2 main groups.

Head End: These objects are supported on the Head End only.
Subscriber Unit: These objects are supported on the Subscriber
unit only.

Parsed from file CISCO-WIRELESS-P2MP-LINK-METRICS-MIB.my.txt
Company: None
Module: CISCO-WIRELESS-P2MP-LINK-METRICS-MIB

Description by cisco

This is the MIB Module for the Cisco Wireless Radio
Point to MultiPoint interface link metrics
specification.

Glossary

The following terms are used in the MIB definitions below.

Radio Interface: The interface that provides wireless communication
features.
Radio Link: The bi-directional wireless link between two
communicating wireless radios.
Radio PHY: Represents the transmission characteristics of the
Radio link.

Link Admin Up: This is the system time when the link is configured
to be 'administratively up'. The user can configure
the link to be up either by executing a 'no shut'
command via the CLI or by setting the ifAdminStatus
object in the IF-MIB to 'up(1)' via SNMP.

Cisco Wireless MIB Organization

The Cisco Wireless Point to Multipoint Radio Link Metrics MIB is
divided into 2 main groups.

Head End: These objects are supported on the Head End only.
Subscriber Unit: These objects are supported on the Subscriber
unit only.

Information by circitor

ciscoWirelessLinkMetricsMIB MODULE-IDENTITY
    LAST-UPDATED    "200601041003Z"
    ORGANIZATION    "Cisco Systems Inc."
    CONTACT-INFO
            "Cisco Systems
            Customer Service

            Postal: 170 W Tasman Drive
               San Jose, CA  95134
               USA

               Tel: +1 800 553-NETS
               E-mail: [email protected]"
    DESCRIPTION
            "This is the MIB Module for the Cisco Wireless Radio
            Point to MultiPoint interface link metrics
            specification.

    Glossary

    The following terms are used in the MIB definitions below.

    Radio Interface:  The interface that provides wireless communication
                      features.
    Radio Link:       The bi-directional wireless link between two
                      communicating wireless radios.
    Radio PHY:        Represents the transmission characteristics of the
                      Radio link.

    Link Admin Up:    This is the system time when the link is configured
                      to be 'administratively up'. The user can configure
                      the link to be up either by executing a 'no shut'
                      command via the CLI or by setting the ifAdminStatus
                      object in the IF-MIB to 'up(1)' via SNMP.

    Cisco Wireless MIB Organization

    The Cisco Wireless Point to Multipoint Radio Link Metrics MIB is
    divided into 2 main groups.

    Head End:        These objects are supported on the Head End only.
    Subscriber Unit: These objects are supported on the Subscriber
                     unit only."

    REVISION        "200601041003Z"
    DESCRIPTION
            "Imported Unsigned32 from SNMPv2-SMI."
    REVISION        "200002141910Z"
    DESCRIPTION
            "The initial version of this MIB module."
    ::= { ciscoMgmt 181 }

Information by cisco_v1

ciscoWirelessLinkMetricsMIB OBJECT IDENTIFIER ::= { ciscoMgmt 181 }

Information by oid_info

Vendor: Cisco
Module: CISCO-WIRELESS-P2MP-LINK-METRICS-MIB

[Automatically extracted from oidview.com]

Information by mibdepot

ciscoWirelessLinkMetricsMIB MODULE-IDENTITY
    LAST-UPDATED    "200601041003Z"
    ORGANIZATION    "Cisco Systems Inc."
    CONTACT-INFO
            "Cisco Systems
            Customer Service

            Postal: 170 W Tasman Drive
               San Jose, CA  95134
               USA

               Tel: +1 800 553-NETS
               E-mail: [email protected]"
    DESCRIPTION
            "This is the MIB Module for the Cisco Wireless Radio
            Point to MultiPoint interface link metrics
            specification.

    Glossary

    The following terms are used in the MIB definitions below.

    Radio Interface:  The interface that provides wireless communication
                      features.
    Radio Link:       The bi-directional wireless link between two
                      communicating wireless radios.
    Radio PHY:        Represents the transmission characteristics of the
                      Radio link.

    Link Admin Up:    This is the system time when the link is configured
                      to be 'administratively up'. The user can configure
                      the link to be up either by executing a 'no shut'
                      command via the CLI or by setting the ifAdminStatus
                      object in the IF-MIB to 'up(1)' via SNMP.

    Cisco Wireless MIB Organization

    The Cisco Wireless Point to Multipoint Radio Link Metrics MIB is
    divided into 2 main groups.

    Head End:        These objects are supported on the Head End only.
    Subscriber Unit: These objects are supported on the Subscriber
                     unit only."

    REVISION        "200601041003Z"
    DESCRIPTION
            "Imported Unsigned32 from SNMPv2-SMI."
    REVISION        "200002141910Z"
    DESCRIPTION
            "The initial version of this MIB module."
    ::= { ciscoMgmt 181 }

Information by cisco

ciscoWirelessLinkMetricsMIB MODULE-IDENTITY
    LAST-UPDATED    "200601041003Z"
    ORGANIZATION    "Cisco Systems Inc."
    CONTACT-INFO
            "Cisco Systems
            Customer Service

            Postal: 170 W Tasman Drive
               San Jose, CA  95134
               USA

               Tel: +1 800 553-NETS
               E-mail: [email protected]"
    DESCRIPTION
            "This is the MIB Module for the Cisco Wireless Radio
            Point to MultiPoint interface link metrics
            specification.

    Glossary

    The following terms are used in the MIB definitions below.

    Radio Interface:  The interface that provides wireless communication
                      features.
    Radio Link:       The bi-directional wireless link between two
                      communicating wireless radios.
    Radio PHY:        Represents the transmission characteristics of the
                      Radio link.

    Link Admin Up:    This is the system time when the link is configured
                      to be 'administratively up'. The user can configure
                      the link to be up either by executing a 'no shut'
                      command via the CLI or by setting the ifAdminStatus
                      object in the IF-MIB to 'up(1)' via SNMP.

    Cisco Wireless MIB Organization

    The Cisco Wireless Point to Multipoint Radio Link Metrics MIB is
    divided into 2 main groups.

    Head End:        These objects are supported on the Head End only.
    Subscriber Unit: These objects are supported on the Subscriber
                     unit only."

    REVISION        "200601041003Z"
    DESCRIPTION
            "Imported Unsigned32 from SNMPv2-SMI."
    REVISION        "200002141910Z"
    DESCRIPTION
            "The initial version of this MIB module."
    ::= { ciscoMgmt 181 }

First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

Greg Satz

Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

Cisco Systems, Inc.

Children (4)

Brothers (645)

To many brothers! Only 100 nearest brothers are shown.