This MIB provides configuration control and status for the
Redundancy Framework (RF) subsystem. RF provides a mechanism
for logical redundancy of software functionality and is
designed to support 1:1 redundancy on processor cards. RF is
not intended to solve all redundancy schemes. Nor is RF
designed to support redundant hardware, such as power
supplies.
Redundancy is concerned with the duplication of data elements
and software functions to provide an alternative in case of
failure. It is a key component to meeting 99.999% availability
requirements for Class 5 carrier solutions.
In the scope of this MIB definition, peer software elements
are redundant and redundant software elements are peers.
Parsed from file CISCO-RF-MIB.mib
Module: CISCO-RF-MIB
This MIB provides configuration control and status for the
Redundancy Framework (RF) subsystem. RF provides a mechanism
for logical redundancy of software functionality and is
designed to support 1:1 redundancy on processor cards. RF is
not intended to solve all redundancy schemes. Nor is RF
designed to support redundant hardware, such as power
supplies.
Redundancy is concerned with the duplication of data elements
and software functions to provide an alternative in case of
failure. It is a key component to meeting 99.999% availability
requirements for Class 5 carrier solutions.
In the scope of this MIB definition, peer software elements
are redundant and redundant software elements are peers.
Parsed from file CISCO-RF-MIB.my.txt
Company: None
Module: CISCO-RF-MIB
This MIB provides configuration control and status for the
Redundancy Framework (RF) subsystem. RF provides a mechanism
for logical redundancy of software functionality and is
designed to support 1:1 redundancy on processor cards. RF is
not intended to solve all redundancy schemes. Nor is RF
designed to support redundant hardware, such as power
supplies.
Redundancy is concerned with the duplication of data elements
and software functions to provide an alternative in case of
failure. It is a key component to meeting 99.999% availability
requirements for Class 5 carrier solutions.
In the scope of this MIB definition, peer software elements
are redundant and redundant software elements are peers.
ciscoRFMIB MODULE-IDENTITY LAST-UPDATED "200509010000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This MIB provides configuration control and status for the Redundancy Framework (RF) subsystem. RF provides a mechanism for logical redundancy of software functionality and is designed to support 1:1 redundancy on processor cards. RF is not intended to solve all redundancy schemes. Nor is RF designed to support redundant hardware, such as power supplies. Redundancy is concerned with the duplication of data elements and software functions to provide an alternative in case of failure. It is a key component to meeting 99.999% availability requirements for Class 5 carrier solutions. In the scope of this MIB definition, peer software elements are redundant and redundant software elements are peers." REVISION "200509010000Z" DESCRIPTION "Added a new textual convention : RFClientStatus. Added the cRFStatusRFClientTable which contains information about all the clients registered with the Redundancy Facility (RF). " REVISION "200404010000Z" DESCRIPTION "Added the new states, systemReset, loadVersionSwitchover and runVersionSwitchover. The unset state has been removed and the init state will represent the absense of the ISSU process. Updated the object cRFStatusIssuState to cRFStatusIssuStateRev1 as the ISSU states have been revised. Added new object, cRFStatusIssuFromVersion and cRFStatusIssuToVersion which represent the from and the to versions of IOS that are involved in the upgrade process. The object ciscoRFIssuStateObjGroup was changed to ciscoRFIssuStateObjGroupRev1 to accomodate these new objects." REVISION "200402040000Z" DESCRIPTION "Added ciscoRFIssuStateNotifGroup and ciscoRFIssuStateObjGroup that represent the notification group and the object group that represents the ISSU state of the system." REVISION "200310020000Z" DESCRIPTION "Changed the description for ciscoRFProgressionNotif" REVISION "200201070000Z" DESCRIPTION "Added the following object in cRFStatus: cRFStatusRFModeCapsTable Added the following object in cRFCfg: cRFCfgRedundancyOperMode Updated description of following object in cRFCfg: cRFCfgRedundancyMode" REVISION "200107200000Z" DESCRIPTION "Added new sub-group cRFHistory Added new table cRFHistorySwitchOverTable which maintains the history of switchovers. Also added objects: cRFStatusFailoverTime cRFStatusPeerStandByEntryTime cRFHistoryTableMaxLength cRFHistoryColdStarts cRFHistoryStandByAvailTime Added textual convention: RFUnitIdentifier." REVISION "200106260000Z" DESCRIPTION "Changed terminology: 'split-mode' is now 'maintenance-mode' Added textual convention: RFMode Deprecated object: cRFCfgSplitMode Added objects: cRFCfgMaintenanceMode cRFCfgRedundancyMode cRFCfgRedundancyModeDescr Added enumeration values: noAction(0) to RFAction activeExtraload(15) to RFState activeHandback(16) to RFState Added new transition state to ciscoRFProgressionNotif: activeExtraload Update compliance and conformance statements" REVISION "200104030945Z" DESCRIPTION "The initial revision of this MIB." ::= { ciscoMgmt 176 }
ciscoRFMIB OBJECT IDENTIFIER ::= { ciscoMgmt 176 }
Vendor: Cisco
Module: CISCO-RF-MIB
[Automatically extracted from oidview.com]
ciscoRFMIB MODULE-IDENTITY LAST-UPDATED "200509010000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This MIB provides configuration control and status for the Redundancy Framework (RF) subsystem. RF provides a mechanism for logical redundancy of software functionality and is designed to support 1:1 redundancy on processor cards. RF is not intended to solve all redundancy schemes. Nor is RF designed to support redundant hardware, such as power supplies. Redundancy is concerned with the duplication of data elements and software functions to provide an alternative in case of failure. It is a key component to meeting 99.999% availability requirements for Class 5 carrier solutions. In the scope of this MIB definition, peer software elements are redundant and redundant software elements are peers." REVISION "200509010000Z" DESCRIPTION "Added a new textual convention : RFClientStatus. Added the cRFStatusRFClientTable which contains information about all the clients registered with the Redundancy Facility (RF). " REVISION "200404010000Z" DESCRIPTION "Added the new states, systemReset, loadVersionSwitchover and runVersionSwitchover. The unset state has been removed and the init state will represent the absense of the ISSU process. Updated the object cRFStatusIssuState to cRFStatusIssuStateRev1 as the ISSU states have been revised. Added new object, cRFStatusIssuFromVersion and cRFStatusIssuToVersion which represent the from and the to versions of IOS that are involved in the upgrade process. The object ciscoRFIssuStateObjGroup was changed to ciscoRFIssuStateObjGroupRev1 to accomodate these new objects." REVISION "200402040000Z" DESCRIPTION "Added ciscoRFIssuStateNotifGroup and ciscoRFIssuStateObjGroup that represent the notification group and the object group that represents the ISSU state of the system." REVISION "200310020000Z" DESCRIPTION "Changed the description for ciscoRFProgressionNotif" REVISION "200201070000Z" DESCRIPTION "Added the following object in cRFStatus: cRFStatusRFModeCapsTable Added the following object in cRFCfg: cRFCfgRedundancyOperMode Updated description of following object in cRFCfg: cRFCfgRedundancyMode" REVISION "200107200000Z" DESCRIPTION "Added new sub-group cRFHistory Added new table cRFHistorySwitchOverTable which maintains the history of switchovers. Also added objects: cRFStatusFailoverTime cRFStatusPeerStandByEntryTime cRFHistoryTableMaxLength cRFHistoryColdStarts cRFHistoryStandByAvailTime Added textual convention: RFUnitIdentifier." REVISION "200106260000Z" DESCRIPTION "Changed terminology: 'split-mode' is now 'maintenance-mode' Added textual convention: RFMode Deprecated object: cRFCfgSplitMode Added objects: cRFCfgMaintenanceMode cRFCfgRedundancyMode cRFCfgRedundancyModeDescr Added enumeration values: noAction(0) to RFAction activeExtraload(15) to RFState activeHandback(16) to RFState Added new transition state to ciscoRFProgressionNotif: activeExtraload Update compliance and conformance statements" REVISION "200104030945Z" DESCRIPTION "The initial revision of this MIB." ::= { ciscoMgmt 176 }
ciscoRFMIB MODULE-IDENTITY LAST-UPDATED "200509010000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This MIB provides configuration control and status for the Redundancy Framework (RF) subsystem. RF provides a mechanism for logical redundancy of software functionality and is designed to support 1:1 redundancy on processor cards. RF is not intended to solve all redundancy schemes. Nor is RF designed to support redundant hardware, such as power supplies. Redundancy is concerned with the duplication of data elements and software functions to provide an alternative in case of failure. It is a key component to meeting 99.999% availability requirements for Class 5 carrier solutions. In the scope of this MIB definition, peer software elements are redundant and redundant software elements are peers." REVISION "200509010000Z" DESCRIPTION "Added a new textual convention : RFClientStatus. Added the cRFStatusRFClientTable which contains information about all the clients registered with the Redundancy Facility (RF). " REVISION "200404010000Z" DESCRIPTION "Added the new states, systemReset, loadVersionSwitchover and runVersionSwitchover. The unset state has been removed and the init state will represent the absense of the ISSU process. Updated the object cRFStatusIssuState to cRFStatusIssuStateRev1 as the ISSU states have been revised. Added new object, cRFStatusIssuFromVersion and cRFStatusIssuToVersion which represent the from and the to versions of IOS that are involved in the upgrade process. The object ciscoRFIssuStateObjGroup was changed to ciscoRFIssuStateObjGroupRev1 to accomodate these new objects." REVISION "200402040000Z" DESCRIPTION "Added ciscoRFIssuStateNotifGroup and ciscoRFIssuStateObjGroup that represent the notification group and the object group that represents the ISSU state of the system." REVISION "200310020000Z" DESCRIPTION "Changed the description for ciscoRFProgressionNotif" REVISION "200201070000Z" DESCRIPTION "Added the following object in cRFStatus: cRFStatusRFModeCapsTable Added the following object in cRFCfg: cRFCfgRedundancyOperMode Updated description of following object in cRFCfg: cRFCfgRedundancyMode" REVISION "200107200000Z" DESCRIPTION "Added new sub-group cRFHistory Added new table cRFHistorySwitchOverTable which maintains the history of switchovers. Also added objects: cRFStatusFailoverTime cRFStatusPeerStandByEntryTime cRFHistoryTableMaxLength cRFHistoryColdStarts cRFHistoryStandByAvailTime Added textual convention: RFUnitIdentifier." REVISION "200106260000Z" DESCRIPTION "Changed terminology: 'split-mode' is now 'maintenance-mode' Added textual convention: RFMode Deprecated object: cRFCfgSplitMode Added objects: cRFCfgMaintenanceMode cRFCfgRedundancyMode cRFCfgRedundancyModeDescr Added enumeration values: noAction(0) to RFAction activeExtraload(15) to RFState activeHandback(16) to RFState Added new transition state to ciscoRFProgressionNotif: activeExtraload Update compliance and conformance statements" REVISION "200104030945Z" DESCRIPTION "The initial revision of this MIB." ::= { ciscoMgmt 176 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.9.9.176.1 | ciscoRFMIBObjects | 4 | 88 | None |
1.3.6.1.4.1.9.9.176.2 | ciscoRFMIBNotificationsPrefix | 1 | 5 | None |
1.3.6.1.4.1.9.9.176.3 | ciscoRFMIBConformance | 2 | 21 | None |
To many brothers! Only 100 nearest brothers are shown.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
... | ||||
1.3.6.1.4.1.9.9.126 | ciscoSonetMIB | 3 | 136 | The MIB module to describe SONET/SDH interfaces objects. This is an extension to the standard SONET MIB(RFC 2558). |
1.3.6.1.4.1.9.9.128 | ciscoVlanIfTableRelationshipMIB | 1 | 12 | ciscoVlanIftableRelationshipMIB |
1.3.6.1.4.1.9.9.129 | ciscoAtmVirtualIfMIB | 2 | 139 | The MIB module to manage ATM Virtual interface objects. ATM virtual interfaces are configured on a physical line. |
1.3.6.1.4.1.9.9.130 | ciscoAdslDmtLineMIB | 3 | 72 | This MIB module serves as an enterprise-specific extension of the ADSL-LINE-MIB. The structure of this MIB module shadows the st… |
1.3.6.1.4.1.9.9.131 | ciscoSystemMIB | 3 | 57 | The systemGroup (see RFC 1907) provides a standard set of basic system information. This MIB module contains Cisco-defined exten… |
1.3.6.1.4.1.9.9.132 | ciscoDs3MIB | 2 | 140 | The MIB module to describe DS3 line objects. This is an extension to the standard DS3 MIB(RFC 2496). |
1.3.6.1.4.1.9.9.133 | ciscoAtmCellLayerMIB | 1 | 138 | The MIB module to describe ATM cell layer objects and statistics of a physical line. |
1.3.6.1.4.1.9.9.134 | ciscoClusterMIB | 3 | 49 | The MIB module for the management of a group of devices called a 'cluster'. A cluster comprises: 1. A command switch, which is a… |
1.3.6.1.4.1.9.9.135 | ciscoWirelessP2pBpiMIB | 3 | 66 | This is the MIB Module for the Baseline Privacy Interface (BPI) at Point to Point Wireless Radio Card. This is a specialization o… |
1.3.6.1.4.1.9.9.136 | ciscoWirelessIfMIB | 3 | 307 | This is the MIB Module for the Cisco Wireless Radio Point to Point interface specification. I) Relationship of the Cisco Wireless… |
1.3.6.1.4.1.9.9.137 | ciscoWirelessTextualConventions | 0 | 0 | This module defines textual conventions used in Cisco Wireless MIBs. |
1.3.6.1.4.1.9.9.138 | ciscoEntityAlarmMIB | 3 | 66 | This MIB module defines the managed objects that support the monitoring of alarms generated by physical entities contained by the… |
1.3.6.1.4.1.9.9.139 | ciscoEntityProvMIB | 3 | 13 | This MIB module defines the objects that support provisioning of 'container' class physical entities. Provisioning sets up a 'co… |
1.3.6.1.4.1.9.9.140 | ciscoCopsClientMIB | 3 | 43 | This MIB module is for configuration & statistic query of Common Open Policy Service(COPS) client feature on the Cisco device. C… |
1.3.6.1.4.1.9.9.141 | ciscoVSIControllerMIB | 2 | 21 | This MIB module is used for configuring ATM Capable Switch to be aware of VSI Controller information. Terminolgies used: VSI … |
1.3.6.1.4.1.9.9.144 | ciscoTransactionConnectionMIB | 2 | 66 | The MIB module for retrieving Cisco Transaction Connection configuration and status. Cisco Transaction Connection routes transac… |
1.3.6.1.4.1.9.9.145 | ciscoWanModuleMIB | 3 | 32 | The MIB to configure Connection Specific parameters and statistics related information in a Service Module. The Service Module(SM… |
1.3.6.1.4.1.9.9.146 | ciscoCallApplicationMIB | 2 | 548 | This MIB allows management of call applications on a network device. A 'call application' is a software module that processes cal… |
1.3.6.1.4.1.9.9.147 | ciscoFirewallMIB | 3 | 75 | MIB module for monitoring Cisco Firewalls. |
1.3.6.1.4.1.9.9.148 | ciscoBgpPolAcctMIB | 2 | 15 | BGP policy based accounting information |
1.3.6.1.4.1.9.9.149 | ciscoAdslLineCapMIB | 3 | 46 | This MIB module serves as an enterprise-specific extension of the ADSL-LINE-MIB. The structure of this MIB module shadows the st… |
1.3.6.1.4.1.9.9.150 | ciscoAAASessionMIB | 3 | 31 | This MIB module provides data for accounting sessions based on Authentication, Authorization, Accounting (AAA) protocols. Referenc… |
1.3.6.1.4.1.9.9.151 | ciscoL2L3IfConfigMIB | 2 | 11 | Interface switchport mode configuration management MIB. This MIB is used to monitor and control configuration of interface switch… |
1.3.6.1.4.1.9.9.152 | ciscoSipUaMIB | 4 | 504 | Cisco User Agent Session Initiation Protocol (SIP) MIB module. SIP is an application-layer signalling protocol for creating, mod… |
1.3.6.1.4.1.9.9.154 | ciscoIdslLineMIB | 3 | 148 | This MIB module describes IDSL (ISDN Digital Line Subscriber) line interfaces. The structure of this module resembles that of th… |
1.3.6.1.4.1.9.9.155 | ciscoSdslLineMIB | 3 | 170 | This MIB module describes all variations of the symmetric DSL line interfaces. The structure of this module resembles and mainta… |
1.3.6.1.4.1.9.9.156 | ciscoCcmMIB | 3 | 487 | The MIB Module for the management of a Cisco Unified Communications Manager (CUCM) application running with a Cisco Communication… |
1.3.6.1.4.1.9.9.157 | ciscoCdmaPdsnMIB | 3 | 984 | This MIB is to support the CDMA PDSN (Packet Data Serving Node) feature. A CDMA2000 network supports wireless data communication… |
1.3.6.1.4.1.9.9.158 | ciscoAAAClientMIB | 3 | 25 | This MIB module provides data for authentication method priority based on Authentication, Authorization, Accounting (AAA) protoco… |
1.3.6.1.4.1.9.9.159 | ciscoQosPolicyConfigMIB | 3 | 35 | This MIB module defines managed objects that support the policy source configuration of Quality of Service (QoS) on the device. T… |
1.3.6.1.4.1.9.9.160 | ciscoCircuitInterfaceMIB | 2 | 11 | The MIB module to configure the circuit description for an interface. The circuit description can be used to describe and identify… |
1.3.6.1.4.1.9.9.161 | ciscoSlbMIB | 3 | 279 | The MIB for managing Server Load Balancing Manager(s), such as the Cisco IOS SLB product. This MIB includes instrumentation for t… |
1.3.6.1.4.1.9.9.162 | ciscoVsiMasterMIB | 3 | 100 | This MIB module contains objects related to the master side of the Virtual Switch Interface protocol used for control of ATM swit… |
1.3.6.1.4.1.9.9.163 | ciscoCallTrackerMIB | 3 | 104 | CISCO-CALL-TRACKER-MIB |
1.3.6.1.4.1.9.9.164 | ciscoCallTrackerTCPMIB | 3 | 25 | This MIB module provides TCP service connection related data for tracking the progress and status of a call. This module extends t… |
1.3.6.1.4.1.9.9.165 | ciscoCallTrackerModemMIB | 3 | 97 | This MIB module provides modem call related data for tracking the progress and status of a call. This module extends tables defin… |
1.3.6.1.4.1.9.9.166 | ciscoCBQosMIB | 2 | 544 | Cisco Class-Based QoS MIB ********************************** Overview ********************************** This MIB provides read acc… |
1.3.6.1.4.1.9.9.167 | ciscoWirelessDocsIfMib | 3 | 140 | This is the MIB Module for MCNS compliant Radio Frequency (RF) interfaces in wireless point-to-multipoint subscriber units (SU) a… |
1.3.6.1.4.1.9.9.168 | ciscoNtpMIB | 3 | 87 | This MIB module defines a MIB which provides mechanisms to monitor an NTP server. The MIB is derived from the Technical Report #Ma… |
1.3.6.1.4.1.9.9.169 | ciscoWirelessDocsExtMIB | 3 | 99 | This MIB module defines Cisco-specific objects that add to the functionality defined in CISCO-WIRELESS-DOCS-IF-MIB. These objects … |
1.3.6.1.4.1.9.9.170 | ciscoWirelessPhyMIB | 2 | 112 | This is the MIB Module for the Cisco Wireless Radio Point to MultiPoint interface. |
1.3.6.1.4.1.9.9.171 | ciscoIpSecFlowMonitorMIB | 3 | 507 | This is a MIB Module for monitoring the structures in IPSec-based Virtual Private Networks. The MIB has been designed to be adopt… |
1.3.6.1.4.1.9.9.172 | ciscoIpSecPolMapMIB | 3 | 21 | The MIB module maps the IPSec entities created dynamically to the policy entities that caused them. This is an appendix to the IPS… |
1.3.6.1.4.1.9.9.173 | ciscoPrivateVlanMIB | 2 | 56 | The MIB module to support Private VLAN feature on Cisco's switching devices. |
1.3.6.1.4.1.9.9.174 | ciscoMobileIpMIB | 3 | 533 | An extension to the IETF MIB module defined in RFC-2006 for managing Mobile IP implementations. Mobile IP introduces the followin… |
1.3.6.1.4.1.9.9.175 | ciscoIfLinkConfigMIB | 2 | 15 | The MIB module for configuration of bulk distribution (de-multiplexing of traffic from higher-bandwidth to lower-bandwidth interf… |
1.3.6.1.4.1.9.9.177 | ciscoSaaApmMIB | 3 | 38 | Acronyms and Terms: SAA - Service Assurance Agent APM - Application Performance Monitoring A MIB for controlling SAA APM. APM provi… |
1.3.6.1.4.1.9.9.178 | ciscoContentEngineMIB | 3 | 263 | The MIB module for the Cisco Content Engine from Cisco Systems, Inc. |
1.3.6.1.4.1.9.9.179 | ciscoCatOSAclQosMIB | 3 | 470 | This MIB module is for Access Control Lists(ACLs) configuration of Quality of Service (QoS) as well as Security feature on the Ci… |
1.3.6.1.4.1.9.9.180 | ciscoWirelessRfMetricsMIB | 5 | 99 | This is the MIB Module for the Cisco Wireless Radio Point to MultiPoint interface specification. |
1.3.6.1.4.1.9.9.181 | ciscoWirelessLinkMetricsMIB | 4 | 141 | This is the MIB Module for the Cisco Wireless Radio Point to MultiPoint interface link metrics specification. Glossary The followin… |
1.3.6.1.4.1.9.9.183 | ciscoGprsAccPtMIB | 3 | 338 | This MIB module supports access point configuration for GGSN in a GPRS system. GPRS [1] is a GSM network providing mobile wireles… |
1.3.6.1.4.1.9.9.184 | ciscoPimMIB | 3 | 36 | This MIB module defines the cisco specific variables for Protocol Independent Multicast (PIM) management. These definitions are a… |
1.3.6.1.4.1.9.9.185 | ciscoBertMIB | 2 | 46 | The MIB module to configure and perform Bit Error Rate Testing (BERT) on DS3, DS1/E1 and DS0/DS0Bundle interfaces. Bit error rate… |
1.3.6.1.4.1.9.9.187 | ciscoBgp4MIB | 4 | 137 | An extension to the IETF BGP4 MIB module defined in RFC 1657. Following is the terminology associated with Border Gateway Protocol… |
1.3.6.1.4.1.9.9.188 | cGtpMIB | 3 | 248 | This MIB module manages the GPRS Tunnelling Protocol (GTP) on GGSN and SGSN. GPRS provides wireless access to packet data network… |
1.3.6.1.4.1.9.9.189 | ciscoPortQosMIB | 3 | 114 | Cisco PORT QOS MIB - Overview This MIB module is for the management of Cisco's per port rate-limiting and traffic shaping on L3 sw… |
1.3.6.1.4.1.9.9.190 | ciscoVoiceAppsMIB | 3 | 40 | The MIB Module for the management of Cisco Voice Applications. This MIB is designed to work in conjunction with the SYSAPPL-MIB … |
1.3.6.1.4.1.9.9.191 | ciscoIpUplinkRedirectMIB | 3 | 11 | This MIB module is for the configuration of Cisco IP Uplink Redirect feature. |
1.3.6.1.4.1.9.9.192 | ciscoGprsChargingMIB | 3 | 315 | This MIB module manages the charging related function on the GGSN node of a GPRS system. The following diagram illustrates a simp… |
1.3.6.1.4.1.9.9.194 | ciscoPppoeMIB | 3 | 89 | Cisco PPPoE sessions management MIB Module. |
1.3.6.1.4.1.9.9.195 | ciscoEntityExtMIB | 3 | 64 | This MIB is an extension of the ENTITY-MIB specified in RFC2737. This MIB module contains Cisco-defined extensions to the entit… |
1.3.6.1.4.1.9.9.197 | ciscoDistDirMIB | 3 | 123 | Cisco Distributed Director MIB. The Cisco Distributed Director provides global Internet scalability and increased performance as … |
1.3.6.1.4.1.9.9.198 | ciscoRfSupMIB | 3 | 58 | This MIB was designed to complement the CISCO-RF-MIB by providing additional optional status and configuration control for redund… |
1.3.6.1.4.1.9.9.199 | ciscoSmFileDownloadMIB | 3 | 23 | The MIB module for downloading files to the Service Modules specifically designed for an architecture containing a controller car… |
1.3.6.1.4.1.9.9.201 | ciscoSwitchUsageMIB | 3 | 15 | This MIB defines objects related to statistics for the usage of switch fabric. The switch fabric is used by the incoming packets … |
1.3.6.1.4.1.9.9.202 | ciscoOscpMIB | 3 | 52 | The MIB module for managing the Cisco Optical Supervisory Channel Protocol (OSCP). The OSCP is used to determine and maintain wav… |
1.3.6.1.4.1.9.9.204 | ciscoXdslLineMIB | 2 | 32 | The tables defined by this MIB module contain a collection of managed objects that are general in nature and apply to different t… |
1.3.6.1.4.1.9.9.215 | ciscoMacNotificationMIB | 3 | 72 | This MIB module is for configuration of the MAC notification feature. MAC notification is a mechanism to inform monitoring device… |
1.3.6.1.4.1.9.9.216 | ciscoContentNetworkMIB | 3 | 34 | This MIB module defines objects for Content Network devices. A Content Network is a collection of devices that optimizes the deli… |
1.3.6.1.4.1.9.9.217 | ciscoCat6kCrossbarMIB | 3 | 210 | The Catalyst 6000 Crossbar MIB provides instrumentation for configuration and operation of the crossbar switching fabric module, … |
1.3.6.1.4.1.9.9.218 | ciscoIfThresholdMIB | 3 | 65 | ciscoIfthresholdMIB |
1.3.6.1.4.1.9.9.219 | ciscoVoiceDnisMIB | 3 | 24 | The MIB module provides management support for Dialer Number Information Service (DNIS) mapping. A DNIS entry is associated with… |
1.3.6.1.4.1.9.9.220 | ciscoPaeMIB | 3 | 231 | Cisco Port Access Entity (PAE) module for managing IEEE Std 802.1x. This MIB provides Port Access Entity information that are eith… |
1.3.6.1.4.1.9.9.221 | ciscoEnhancedMemPoolMIB | 3 | 87 | New MIB module for monitoring the memory pools of all physical entities on a managed system. |
1.3.6.1.4.1.9.9.222 | ciscoEnhancedWredMIB | 3 | 70 | Cisco WRED MIB - Overview Cisco Weighted Random Early Detection/Drop (WRED) is a method which avoids traffic congestion on an outp… |
1.3.6.1.4.1.9.9.223 | ciscoWanNcdpMIB | 3 | 58 | This MIB module is intended for the management of network clock distribution and the Network Clock Distribution Protocol (NCDP) i… |
1.3.6.1.4.1.9.9.224 | ciscoDevExcepReportMIB | 3 | 29 | This mib defines the SNMP objects to report exceptions to north-bound NMS. The devices implementing this MIB monitor the status of… |
1.3.6.1.4.1.9.9.225 | ciscoLagMIB | 3 | 56 | Cisco Link Aggregation module for managing IEEE Std 802.3ad. This MIB provides Link Aggregation information that are either exclud… |
1.3.6.1.4.1.9.9.226 | ciscoNDEMIB | 4 | 17 | The Netflow Data Export (NDE) MIB provides instrumentation for configuration and operation of the Netflow Data Export feature. A … |
... |