The MIB for providing information specified
in ITU Q752 Monitoring and Measurements for
Signaling System No. 7(SS7) Network.
This information can be used to manage messages
transported over SS7 Network via Cisco IP
Transfer Point.
The Cisco IP Transfer Point (ITP) is a hardware
and software solution that transports SS7 traffic
using IP. Each ITP node provides function similar
to SS7 signaling point.
The relevant ITU documents describing this technology
is the ITU Q series, including ITU Q.700: Introduction
to CCITT Signaling System No. 7 and ITU Q.701
Functional description of the message transfer part
(MTP) of Signaling System No. 7.
The ITP Quality of Service (QoS) model allows the
definition of 8 QoS classes, 0 through 7.
QoS classes can be assigned only SCTP links.
Only one QoS class can be assigned to an SCTP link.
Class 0 will be designated as the default class.
Packets that are not classified to a designated QoS
class will get assigned to the default class. Each
provisioned QoS class can be assigned an IP precedence
value or a Differential Services Code Point (DSCP).
The default class is initialized to IP precedence
zero (0). The default class initial TOS setting can
be changed through the command line interface. The
Type of Service (TOS) byte in the IP header will be
set to the IP precedence or DSCP that is assigned to
class. Every packet forwarded over an SCTP link that
was provisioned for a given QoS class will have the
TOS byte set.
Parsed from file CISCO-ITP-SP2-MIB.mib
Module: CISCO-ITP-SP2-MIB
The MIB for providing information specified
in ITU Q752 Monitoring and Measurements for
Signaling System No. 7(SS7) Network.
This information can be used to manage messages
transported over SS7 Network via Cisco IP
Transfer Point.
The Cisco IP Transfer Point (ITP) is a hardware
and software solution that transports SS7 traffic
using IP. Each ITP node provides function similar
to SS7 signaling point.
The relevant ITU documents describing this technology
is the ITU Q series, including ITU Q.700: Introduction
to CCITT Signaling System No. 7 and ITU Q.701
Functional description of the message transfer part
(MTP) of Signaling System No. 7.
The ITP Quality of Service (QoS) model allows the
definition of 8 QoS classes, 0 through 7.
QoS classes can be assigned only SCTP links.
Only one QoS class can be assigned to an SCTP link.
Class 0 will be designated as the default class.
Packets that are not classified to a designated QoS
class will get assigned to the default class. Each
provisioned QoS class can be assigned an IP precedence
value or a Differential Services Code Point (DSCP).
The default class is initialized to IP precedence
zero (0). The default class initial TOS setting can
be changed through the command line interface. The
Type of Service (TOS) byte in the IP header will be
set to the IP precedence or DSCP that is assigned to
class. Every packet forwarded over an SCTP link that
was provisioned for a given QoS class will have the
TOS byte set.
Parsed from file CISCO-ITP-SP2-MIB.my.txt
Company: None
Module: CISCO-ITP-SP2-MIB
The MIB for providing information specified
in ITU Q752 Monitoring and Measurements for
Signaling System No. 7(SS7) Network.
This information can be used to manage messages
transported over SS7 Network via Cisco IP
Transfer Point.
The Cisco IP Transfer Point (ITP) is a hardware
and software solution that transports SS7 traffic
using IP. Each ITP node provides function similar
to SS7 signaling point.
The relevant ITU documents describing this technology
is the ITU Q series, including ITU Q.700: Introduction
to CCITT Signaling System No. 7 and ITU Q.701
Functional description of the message transfer part
(MTP) of Signaling System No. 7.
The ITP Quality of Service (QoS) model allows the
definition of 8 QoS classes, 0 through 7.
QoS classes can be assigned only SCTP links.
Only one QoS class can be assigned to an SCTP link.
Class 0 will be designated as the default class.
Packets that are not classified to a designated QoS
class will get assigned to the default class. Each
provisioned QoS class can be assigned an IP precedence
value or a Differential Services Code Point (DSCP).
The default class is initialized to IP precedence
zero (0). The default class initial TOS setting can
be changed through the command line interface. The
Type of Service (TOS) byte in the IP header will be
set to the IP precedence or DSCP that is assigned to
class. Every packet forwarded over an SCTP link that
was provisioned for a given QoS class will have the
TOS byte set.
ciscoItpSp2MIB MODULE-IDENTITY LAST-UPDATED "200209160000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems, Inc Customer Service Postal: 170 W. Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The MIB for providing information specified in ITU Q752 Monitoring and Measurements for Signaling System No. 7(SS7) Network. This information can be used to manage messages transported over SS7 Network via Cisco IP Transfer Point. The Cisco IP Transfer Point (ITP) is a hardware and software solution that transports SS7 traffic using IP. Each ITP node provides function similar to SS7 signaling point. The relevant ITU documents describing this technology is the ITU Q series, including ITU Q.700: Introduction to CCITT Signaling System No. 7 and ITU Q.701 Functional description of the message transfer part (MTP) of Signaling System No. 7. The ITP Quality of Service (QoS) model allows the definition of 8 QoS classes, 0 through 7. QoS classes can be assigned only SCTP links. Only one QoS class can be assigned to an SCTP link. Class 0 will be designated as the default class. Packets that are not classified to a designated QoS class will get assigned to the default class. Each provisioned QoS class can be assigned an IP precedence value or a Differential Services Code Point (DSCP). The default class is initialized to IP precedence zero (0). The default class initial TOS setting can be changed through the command line interface. The Type of Service (TOS) byte in the IP header will be set to the IP precedence or DSCP that is assigned to class. Every packet forwarded over an SCTP link that was provisioned for a given QoS class will have the TOS byte set. " REVISION "200209160000Z" DESCRIPTION "The ability to allow multiple instances of Signalling Points to run in the same device has introduce a new index structure. All objects in this MIB will be deprecated and replaced by objects in the CISCO-ITP-GSP2-MIB.my MIB." REVISION "200202210000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 248 }
ciscoItpSp2MIB OBJECT IDENTIFIER ::= { ciscoMgmt 248 }
Vendor: Cisco
Module: CISCO-ITP-SP2-MIB
[Automatically extracted from oidview.com]
ciscoItpSp2MIB MODULE-IDENTITY LAST-UPDATED "200209160000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems, Inc Customer Service Postal: 170 W. Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The MIB for providing information specified in ITU Q752 Monitoring and Measurements for Signaling System No. 7(SS7) Network. This information can be used to manage messages transported over SS7 Network via Cisco IP Transfer Point. The Cisco IP Transfer Point (ITP) is a hardware and software solution that transports SS7 traffic using IP. Each ITP node provides function similar to SS7 signaling point. The relevant ITU documents describing this technology is the ITU Q series, including ITU Q.700: Introduction to CCITT Signaling System No. 7 and ITU Q.701 Functional description of the message transfer part (MTP) of Signaling System No. 7. The ITP Quality of Service (QoS) model allows the definition of 8 QoS classes, 0 through 7. QoS classes can be assigned only SCTP links. Only one QoS class can be assigned to an SCTP link. Class 0 will be designated as the default class. Packets that are not classified to a designated QoS class will get assigned to the default class. Each provisioned QoS class can be assigned an IP precedence value or a Differential Services Code Point (DSCP). The default class is initialized to IP precedence zero (0). The default class initial TOS setting can be changed through the command line interface. The Type of Service (TOS) byte in the IP header will be set to the IP precedence or DSCP that is assigned to class. Every packet forwarded over an SCTP link that was provisioned for a given QoS class will have the TOS byte set. " REVISION "200209160000Z" DESCRIPTION "The ability to allow multiple instances of Signalling Points to run in the same device has introduce a new index structure. All objects in this MIB will be deprecated and replaced by objects in the CISCO-ITP-GSP2-MIB.my MIB." REVISION "200202210000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 248 }
ciscoItpSp2MIB MODULE-IDENTITY LAST-UPDATED "200209160000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems, Inc Customer Service Postal: 170 W. Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "The MIB for providing information specified in ITU Q752 Monitoring and Measurements for Signaling System No. 7(SS7) Network. This information can be used to manage messages transported over SS7 Network via Cisco IP Transfer Point. The Cisco IP Transfer Point (ITP) is a hardware and software solution that transports SS7 traffic using IP. Each ITP node provides function similar to SS7 signaling point. The relevant ITU documents describing this technology is the ITU Q series, including ITU Q.700: Introduction to CCITT Signaling System No. 7 and ITU Q.701 Functional description of the message transfer part (MTP) of Signaling System No. 7. The ITP Quality of Service (QoS) model allows the definition of 8 QoS classes, 0 through 7. QoS classes can be assigned only SCTP links. Only one QoS class can be assigned to an SCTP link. Class 0 will be designated as the default class. Packets that are not classified to a designated QoS class will get assigned to the default class. Each provisioned QoS class can be assigned an IP precedence value or a Differential Services Code Point (DSCP). The default class is initialized to IP precedence zero (0). The default class initial TOS setting can be changed through the command line interface. The Type of Service (TOS) byte in the IP header will be set to the IP precedence or DSCP that is assigned to class. Every packet forwarded over an SCTP link that was provisioned for a given QoS class will have the TOS byte set. " REVISION "200209160000Z" DESCRIPTION "The ability to allow multiple instances of Signalling Points to run in the same device has introduce a new index structure. All objects in this MIB will be deprecated and replaced by objects in the CISCO-ITP-GSP2-MIB.my MIB." REVISION "200202210000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 248 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.248.0 | ciscoItpSp2MIBNotifications | 0 | 0 | None |
| 1.3.6.1.4.1.9.9.248.1 | ciscoItpSp2MIBObjects | 2 | 22 | None |
| 1.3.6.1.4.1.9.9.248.2 | ciscoItpSp2MIBConformance | 2 | 5 | None |
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.9.9.198 | ciscoRfSupMIB | 3 | 58 | This MIB was designed to complement the CISCO-RF-MIB by providing additional optional status and configuration control for redund… |
| 1.3.6.1.4.1.9.9.199 | ciscoSmFileDownloadMIB | 3 | 23 | The MIB module for downloading files to the Service Modules specifically designed for an architecture containing a controller car… |
| 1.3.6.1.4.1.9.9.201 | ciscoSwitchUsageMIB | 3 | 15 | This MIB defines objects related to statistics for the usage of switch fabric. The switch fabric is used by the incoming packets … |
| 1.3.6.1.4.1.9.9.202 | ciscoOscpMIB | 3 | 52 | The MIB module for managing the Cisco Optical Supervisory Channel Protocol (OSCP). The OSCP is used to determine and maintain wav… |
| 1.3.6.1.4.1.9.9.204 | ciscoXdslLineMIB | 2 | 32 | The tables defined by this MIB module contain a collection of managed objects that are general in nature and apply to different t… |
| 1.3.6.1.4.1.9.9.215 | ciscoMacNotificationMIB | 3 | 72 | This MIB module is for configuration of the MAC notification feature. MAC notification is a mechanism to inform monitoring device… |
| 1.3.6.1.4.1.9.9.216 | ciscoContentNetworkMIB | 3 | 34 | This MIB module defines objects for Content Network devices. A Content Network is a collection of devices that optimizes the deli… |
| 1.3.6.1.4.1.9.9.217 | ciscoCat6kCrossbarMIB | 3 | 210 | The Catalyst 6000 Crossbar MIB provides instrumentation for configuration and operation of the crossbar switching fabric module, … |
| 1.3.6.1.4.1.9.9.218 | ciscoIfThresholdMIB | 3 | 65 | ciscoIfthresholdMIB |
| 1.3.6.1.4.1.9.9.219 | ciscoVoiceDnisMIB | 3 | 24 | The MIB module provides management support for Dialer Number Information Service (DNIS) mapping. A DNIS entry is associated with… |
| 1.3.6.1.4.1.9.9.220 | ciscoPaeMIB | 3 | 231 | Cisco Port Access Entity (PAE) module for managing IEEE Std 802.1x. This MIB provides Port Access Entity information that are eith… |
| 1.3.6.1.4.1.9.9.221 | ciscoEnhancedMemPoolMIB | 3 | 87 | New MIB module for monitoring the memory pools of all physical entities on a managed system. |
| 1.3.6.1.4.1.9.9.222 | ciscoEnhancedWredMIB | 3 | 70 | Cisco WRED MIB - Overview Cisco Weighted Random Early Detection/Drop (WRED) is a method which avoids traffic congestion on an outp… |
| 1.3.6.1.4.1.9.9.223 | ciscoWanNcdpMIB | 3 | 58 | This MIB module is intended for the management of network clock distribution and the Network Clock Distribution Protocol (NCDP) i… |
| 1.3.6.1.4.1.9.9.224 | ciscoDevExcepReportMIB | 3 | 29 | This mib defines the SNMP objects to report exceptions to north-bound NMS. The devices implementing this MIB monitor the status of… |
| 1.3.6.1.4.1.9.9.225 | ciscoLagMIB | 3 | 56 | Cisco Link Aggregation module for managing IEEE Std 802.3ad. This MIB provides Link Aggregation information that are either exclud… |
| 1.3.6.1.4.1.9.9.226 | ciscoNDEMIB | 4 | 17 | The Netflow Data Export (NDE) MIB provides instrumentation for configuration and operation of the Netflow Data Export feature. A … |
| 1.3.6.1.4.1.9.9.227 | ciscoItpAclMIB | 3 | 45 | The MIB for managing access lists that control messages transported over Signalling System No. 7 (SS7) Network via Cisco IP Trans… |
| 1.3.6.1.4.1.9.9.228 | ciscoItpRtMIB | 3 | 47 | This MIB is for managing information required to route messages transported over Signalling System No. 7 (SS7) Network via Cisco … |
| 1.3.6.1.4.1.9.9.229 | ciscoDs1ExtMIB | 2 | 129 | The MIB module to describe DS1/E1 interface objects. This is an extension to the standard DS1/E1 MIB (RFC 2495). Unless mentioned… |
| 1.3.6.1.4.1.9.9.230 | ciscoItpActMIB | 3 | 29 | The MIB for providing information specified in ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network. This… |
| 1.3.6.1.4.1.9.9.231 | ciscoItpTextualConventions | 0 | 0 | The defines textual conventions used by to manage devices related to the SS7 network. The relevant ITU documents describing this… |
| 1.3.6.1.4.1.9.9.232 | ciscoItpSpMIB | 3 | 384 | The MIB for managing Signalling Points and its associated messages transported over Signalling System No. 7 (SS7) Network via Ci… |
| 1.3.6.1.4.1.9.9.233 | ciscoItpSccpMIB | 3 | 194 | The MIB for Signaling Connection Control Part(SCCP) messages transported over Signalling System No. 7 (SS7) Network via Cisco IP … |
| 1.3.6.1.4.1.9.9.234 | ciscoWanTopologyMIB | 3 | 83 | A management station can use this MIB module for the maintenance of persistent topology information of the PNNI network. Previous… |
| 1.3.6.1.4.1.9.9.235 | ciscoImaMIB | 2 | 60 | The MIB module describes Cisco IMA objects. This is an extension to the standard of ATM Forum IMA version 1.1, AF-PHY-0086.001 Spe… |
| 1.3.6.1.4.1.9.9.236 | ciscoWanSctMgmtMIB | 2 | 18 | MIB module to manage SCT files in a node. SCTs (Service Class Templates) are nodal configuration files, which define the traffic … |
| 1.3.6.1.4.1.9.9.237 | ciscoNmsApplHealthMIB | 3 | 21 | This MIB defines Cisco NMS Application (cna) Health Status Notifications and the related objects. These notifications will be sen… |
| 1.3.6.1.4.1.9.9.238 | ciscoIGMPFilterMIB | 2 | 45 | IGMP Filter configuration MIB. This MIB provides a mechanism for users to configure the system to intercept IGMP joins for IP Mul… |
| 1.3.6.1.4.1.9.9.240 | cGgsnMIB | 3 | 389 | This MIB module manages the Gateway GPRS Support Node (GGSN) devices. A GGSN device provides interworking with external packet-dat… |
| 1.3.6.1.4.1.9.9.241 | cggsnQosMIB | 2 | 89 | This MIB module manages the Quality of Service parameters of GGSN in a GPRS system. GGSN is the Gateway GPRS Support Node in the … |
| 1.3.6.1.4.1.9.9.242 | ciscoCableAvailabilityMIB | 3 | 60 | This is the MIB module for management of Hot Standby Connection to Connection Protocol (HCCP) features. HCCP is a Cisco proprieta… |
| 1.3.6.1.4.1.9.9.243 | ciscoHealthMonitorMIB | 3 | 22 | Health Monitor MIB module. The Health Monitor uses a model based on events of varying severity and frequency, and predefined rule… |
| 1.3.6.1.4.1.9.9.244 | ciscoNbarProtocolDiscoveryMIB | 3 | 84 | Cisco NBAR Protocol Discovery MIB NBAR - Network Based Application Recognition is an intelligent classification engine that reco… |
| 1.3.6.1.4.1.9.9.245 | ciscoGtpDirectorMIB | 3 | 35 | This MIB module defines objects that are used to manage GTP Director Module. In the GPRS network, the APN is the identifier that s… |
| 1.3.6.1.4.1.9.9.246 | ciscoL2TunnelConfigMIB | 3 | 65 | This MIB module is for layer 2 tunneling related configurations on a device. Tunneling allows separate local networks to be consi… |
| 1.3.6.1.4.1.9.9.249 | ciscoEnhancedImageMIB | 2 | 44 | Initial version of the MIB. This MIB has Image table containing the following information related to the running IOS image 1. Enti… |
| 1.3.6.1.4.1.9.9.252 | cTapMIB | 3 | 80 | This module manages Cisco's intercept feature. |
| 1.3.6.1.4.1.9.9.253 | ciscoItpXuaMIB | 3 | 250 | The MIB for MTP3 User Adaptation (M3UA) and SCCP User Adaptation (SUA) for Cisco's IP Transfer Point (ITP) implementation. The Cis… |
| 1.3.6.1.4.1.9.9.254 | ciscoSlbExtMIB | 3 | 425 | The extended MIB for managing Server Load Balancing Manager(s). This MIB extends the SLB management functionality in the CISCO-SL… |
| 1.3.6.1.4.1.9.9.255 | ciscoFabricMcastMIB | 3 | 30 | Fabric Multicast Resource MIB module. This MIB module is used for managing/tracking the fabric multicast resource related informa… |
| 1.3.6.1.4.1.9.9.256 | ciscoFabricMcastApplMIB | 3 | 16 | Fabric multicast resource MIB module. This MIB module is used for managing/tracking the fabric multicast resource application rel… |
| 1.3.6.1.4.1.9.9.257 | ciscoFabricHfrMIB | 3 | 90 | Cisco Enhanced Benes fabric MIB module. This MIB module is used for managing/tracking the Ehanced Benes Fabric entities and/or fa… |
| 1.3.6.1.4.1.9.9.259 | ciscoPsaMicrocodeMIB | 3 | 24 | Cisco PSA Microcode MIB - Overview The PSA is the Packet Switching ASIC used in module like engine 2(E2) line cards in GSR for IP … |
| 1.3.6.1.4.1.9.9.260 | ciscoSsgMIB | 3 | 218 | The MIB Module manages Service Selection Gateway(SSG) devices. Service Selection Gateway(SSG) is a switching solution for service… |
| 1.3.6.1.4.1.9.9.261 | ciscoPtopoExtnMIB | 2 | 18 | This MIB module contains extensions to the PTOPO-MIB that provide support to distinguish between bidirectional and unidirectional… |
| 1.3.6.1.4.1.9.9.262 | ciscoVoaMIB | 2 | 14 | This MIB module defines objects to configure and manage the Variable Optical Attenuator (VOA) modules. VOA modules are typically … |
| 1.3.6.1.4.1.9.9.263 | ciscoIgmpSnoopingMIB | 3 | 286 | The MIB module for IGMP Snooping feature. Internet Group Management Protocol (IGMP) is the protocol used by IPv4 end hosts to ind… |
| 1.3.6.1.4.1.9.9.264 | ciscoOpticalMonitorMIB | 3 | 72 | This MIB module defines objects to monitor optical characteristics and set corresponding thresholds on the optical interfaces in … |
| 1.3.6.1.4.1.9.9.265 | ciscoEntityPfeMib | 3 | 58 | The Packet Forwarding Engine technology are Cisco developed Network Processors, which accelerates certain features in order to pr… |
| 1.3.6.1.4.1.9.9.268 | ciscoWlanVlanMIB | 3 | 41 | This MIB module provides network management support for device VLAN configuration on IEEE 802.11 wireless LAN. ACRONYMS AES Advanced… |
| 1.3.6.1.4.1.9.9.269 | ciscoTBridgeDevIfMIB | 2 | 20 | This MIB module provides network management support for configuration and status information of devices supporting transparent br… |
| 1.3.6.1.4.1.9.9.270 | ciscoSyslogEventExtMIB | 2 | 21 | This MIB module extends the Cisco Syslog MIB and provides network management support to handle and process Syslog messages as devi… |
| 1.3.6.1.4.1.9.9.271 | ciscoL2DevMonMIB | 3 | 24 | This MIB module is for monitoring of active layer 2 devices by hot standby layer 2 devices and the configuration of hot standby s… |
| 1.3.6.1.4.1.9.9.272 | ciscoDot11IfMIB | 3 | 212 | This MIB module provides network management support for Cisco IEEE 802.11 Wireless LAN type device (Access Point) radio interface… |
| 1.3.6.1.4.1.9.9.273 | ciscoDot11AssociationMIB | 2 | 91 | This MIB module provides network management information on IEEE 802.11 wireless device association management and data packet for… |
| 1.3.6.1.4.1.9.9.275 | ciscoBcpMIB | 2 | 25 | This MIB module describes the Managed Objects for of Bridge Control Protocol (RFC2878). This MIB is influenced by RFC1474. |
| 1.3.6.1.4.1.9.9.276 | ciscoIfExtensionMIB | 3 | 143 | A MIB module for extending the IF-MIB (RFC2863) to add objects which provide additional information about interfaces not availabl… |
| 1.3.6.1.4.1.9.9.277 | ciscoDdpIappMIB | 3 | 22 | This MIB module describes the management support for the Inter-Access Point Protocol (IAPP). IAPP is a Cisco propriety Data Deli… |
| 1.3.6.1.4.1.9.9.278 | ciscoIpProtocolMIB | 3 | 63 | The MIB module is for management of information to support packet filtering on IP protocols. The cippfIpProfileTable allows users… |
| 1.3.6.1.4.1.9.9.279 | ciscoAtmQosMIB | 3 | 67 | The MIB is created to provide ATM QoS information in these areas: 1. Traffic shaping on a per-VC basis 2. Traffic shaping on a pe… |
| 1.3.6.1.4.1.9.9.280 | ciscoOutageMIB | 3 | 75 | This MIB module describes, stores, and reports outage related information generated by individual hardware and software component… |
| 1.3.6.1.4.1.9.9.281 | ciscoFabricC12kMIB | 3 | 135 | Cisco Fabric MIB module for c12000 series of routers. This MIB module is used for managing/tracking the c12000 fabric entities an… |
| 1.3.6.1.4.1.9.9.282 | ciscoVsanMIB | 2 | 104 | The MIB module for the management of the Virtual Storage Networks (VSANs) within the frame work of Cisco's VSAN Architecture. T… |
| 1.3.6.1.4.1.9.9.284 | ciscoFcRouteMIB | 2 | 55 | The MIB module for configuring and displaying FC (Fibre Channel) Route Information. |
| 1.3.6.1.4.1.9.9.285 | ciscoPortChannelMIB | 2 | 40 | The MIB module for management of Port Channel ports. In addition to this MIB, CISCO-FC-FE-MIB and interface mib (rfc2863) will al… |
| 1.3.6.1.4.1.9.9.286 | ciscoWwnmgrMIB | 2 | 38 | The World Wide Name (WWN) in the fibre channel networking technology is equivalent to the MAC address in Ethernet. There are six … |
| 1.3.6.1.4.1.9.9.287 | ciscoFspfMIB | 4 | 95 | Fabric Shortest Path First (FSPF) MIB. |
| 1.3.6.1.4.1.9.9.288 | ciscoRadiusMIB | 3 | 91 | MIB module for monitoring and configuring authentication and logging services using RADIUS (Remote Authentication Dial In User Se… |
| 1.3.6.1.4.1.9.9.289 | ciscoFcFeMIB | 2 | 315 | This is the Cisco fibre element management MIB module. It covers: - Cisco extension to the interface MIB ( IF-MIB ) - Contains all… |
| 1.3.6.1.4.1.9.9.290 | ciscoVirtualNwIfMIB | 2 | 22 | The MIB module for management of virtual network interfaces to VSAN and VLAN. |
| 1.3.6.1.4.1.9.9.292 | ciscoRscnMIB | 2 | 67 | The MIB module for the management of the Fibre Channel's Registered State Change Notification (RSCN) functionality, which is spec… |
| 1.3.6.1.4.1.9.9.293 | ciscoNsMIB | 2 | 67 | The MIB module for the management of the Cisco Name Server which realizes the FC-GS3 requirements for Name Server (NS). |
| 1.3.6.1.4.1.9.9.294 | ciscoZsMIB | 2 | 254 | The MIB module for the management of zoning within the framework of Cisco's Zoning Server (ZS) Archi- tecture which realizes the … |
| 1.3.6.1.4.1.9.9.295 | ciscoFcPingMIB | 2 | 37 | The MIB module for the management of the Fibre Channel Ping functionality. |
| 1.3.6.1.4.1.9.9.296 | ciscoFcTraceRouteMIB | 2 | 31 | The MIB module for the management of the Fibre Channel Trace Route functionality. |
| 1.3.6.1.4.1.9.9.297 | ciscoFcsMIB | 2 | 122 | The MIB module for the management of a Fabric Configuration Server (FCS). An FCS is defined by the FC-GS3 standard. This MIB ena… |
| ... | ||||