Cisco Fabric MIB module for c12000 series of routers.
This MIB module is used for managing/tracking the c12000
fabric entities and fabric related configuration, status
and statistics information.
C12000 fabric architecture is based on NxN non-blocking
crossbar switch fabric, where N stands for the maximum
number of LCs that can be supported in the chassis (this
includes the RP). The connections through the switch
fabric is controlled by a scheduler (CSC), the CSC
accepts transmission requests from line cards, issues
grants to access the fabric, and provides a reference
clock to all the cards in the system to synchronize data
transfer across the crossbar.
Some of the error status objects in the MIB are read-clear,
that is the value of the object is cleared on a query of the
object.
Details about the various fabric related attributes
specified in the MIB could be found at following link,
http://www.cisco.com/warp/public/108/hwts_12000_22281.html
Acronyms and terms used in the MIB module:
GSR - Gigabit Switch Router.
RP - Route Processor.
LC - Line Card.
SFC - Switch Fabric Card.
CRC - Cyclic Redundancy Check.
CSC - Clock Scheduler Card.
CiscoCell - The unit of data that is exchanged
between line cards through the switch
fabric.
FIA - Fabric Interface Asic, this Asic
resides on the line card and is
used to interface line card and
switch fabric.
ToFabFIA - Represents the ToFabric FIA, FIA
which transmits data from the
line card to the fabric.
FrFabFIA - Represents the From Fabric FIA, FIA
which receives data from the fabric.
SCA - Scheduler Control Asic, this Asic
resides on each CSC and is used to
arbitrate among the line card
requests to transmit CiscoCells
through the switch fabric.
Xbar - Crossbar Switch Asic, this Asic
resides on each fabric card and provides
the functionality of a crossbar
switch.
SLI - Serial Link interface block, this
block resides on the FIA on the line
cards and the Xbar and SCA on the
switch fabric. The functionality of SLI
is to interface the linecards and fabric
cards.
BMA - Buffer Manager Asic, this Asic is
located on a Pre OC-192 linecard.
It provides the packet buffering
and buffer queue management.
MCC - Memory Communication Controller Asic,
this Asic is located on a OC-192
linecard and is an enhanced packet buffer
Asic. MCC captures the data and control
path information for packets destined
to all line cards in the system. On the
receive side MCC interfaces with the
Rx Asic where the packets are looked up
and sent to the MCC for buffering. On the
transmit side it interfaces with the
ToFabFIA where packets arrived from MCC
will be segmented into CiscoCells before
being sent across the fabric.
CSAR - Cisco Cell Segmentation And Reassembly,
The name of an FPGA used on the RP which
handles traffic between the processor
and switch fabric.
Request - A signal sent by a FIA (on a line card)
to the SCA (on Master CSC) requesting a
switch connection to a output linecard as an
intent to transmit CiscoCells across.
Grant - A signal sent by the SCA to a FIA (on a
line card) granting a switch connection which
was requested by the FIA.
SRAM - Static Random Access Memory.
LOS - Loss Of Signal.
FPGA - Field Programmable Gate Array.
Parsed from file CISCO-FABRIC-C12K-MIB.mib
Module: CISCO-FABRIC-C12K-MIB
Cisco Fabric MIB module for c12000 series of routers.
This MIB module is used for managing/tracking the c12000
fabric entities and fabric related configuration, status
and statistics information.
C12000 fabric architecture is based on NxN non-blocking
crossbar switch fabric, where N stands for the maximum
number of LCs that can be supported in the chassis (this
includes the RP). The connections through the switch
fabric is controlled by a scheduler (CSC), the CSC
accepts transmission requests from line cards, issues
grants to access the fabric, and provides a reference
clock to all the cards in the system to synchronize data
transfer across the crossbar.
Some of the error status objects in the MIB are read-clear,
that is the value of the object is cleared on a query of the
object.
Details about the various fabric related attributes
specified in the MIB could be found at following link,
http://www.cisco.com/warp/public/108/hwts_12000_22281.html
Acronyms and terms used in the MIB module:
GSR - Gigabit Switch Router.
RP - Route Processor.
LC - Line Card.
SFC - Switch Fabric Card.
CRC - Cyclic Redundancy Check.
CSC - Clock Scheduler Card.
CiscoCell - The unit of data that is exchanged
between line cards through the switch
fabric.
FIA - Fabric Interface Asic, this Asic
resides on the line card and is
used to interface line card and
switch fabric.
ToFabFIA - Represents the ToFabric FIA, FIA
which transmits data from the
line card to the fabric.
FrFabFIA - Represents the From Fabric FIA, FIA
which receives data from the fabric.
SCA - Scheduler Control Asic, this Asic
resides on each CSC and is used to
arbitrate among the line card
requests to transmit CiscoCells
through the switch fabric.
Xbar - Crossbar Switch Asic, this Asic
resides on each fabric card and provides
the functionality of a crossbar
switch.
SLI - Serial Link interface block, this
block resides on the FIA on the line
cards and the Xbar and SCA on the
switch fabric. The functionality of SLI
is to interface the linecards and fabric
cards.
BMA - Buffer Manager Asic, this Asic is
located on a Pre OC-192 linecard.
It provides the packet buffering
and buffer queue management.
MCC - Memory Communication Controller Asic,
this Asic is located on a OC-192
linecard and is an enhanced packet buffer
Asic. MCC captures the data and control
path information for packets destined
to all line cards in the system. On the
receive side MCC interfaces with the
Rx Asic where the packets are looked up
and sent to the MCC for buffering. On the
transmit side it interfaces with the
ToFabFIA where packets arrived from MCC
will be segmented into CiscoCells before
being sent across the fabric.
CSAR - Cisco Cell Segmentation And Reassembly,
The name of an FPGA used on the RP which
handles traffic between the processor
and switch fabric.
Request - A signal sent by a FIA (on a line card)
to the SCA (on Master CSC) requesting a
switch connection to a output linecard as an
intent to transmit CiscoCells across.
Grant - A signal sent by the SCA to a FIA (on a
line card) granting a switch connection which
was requested by the FIA.
SRAM - Static Random Access Memory.
LOS - Loss Of Signal.
FPGA - Field Programmable Gate Array.
Parsed from file CISCO-FABRIC-C12K-MIB.my.txt
Company: None
Module: CISCO-FABRIC-C12K-MIB
Cisco Fabric MIB module for c12000 series of routers.
This MIB module is used for managing/tracking the c12000
fabric entities and fabric related configuration, status
and statistics information.
C12000 fabric architecture is based on NxN non-blocking
crossbar switch fabric, where N stands for the maximum
number of LCs that can be supported in the chassis (this
includes the RP). The connections through the switch
fabric is controlled by a scheduler (CSC), the CSC
accepts transmission requests from line cards, issues
grants to access the fabric, and provides a reference
clock to all the cards in the system to synchronize data
transfer across the crossbar.
Some of the error status objects in the MIB are read-clear,
that is the value of the object is cleared on a query of the
object.
Details about the various fabric related attributes
specified in the MIB could be found at following link,
http://www.cisco.com/warp/public/108/hwts_12000_22281.html
Acronyms and terms used in the MIB module:
GSR - Gigabit Switch Router.
RP - Route Processor.
LC - Line Card.
SFC - Switch Fabric Card.
CRC - Cyclic Redundancy Check.
CSC - Clock Scheduler Card.
CiscoCell - The unit of data that is exchanged
between line cards through the switch
fabric.
FIA - Fabric Interface Asic, this Asic
resides on the line card and is
used to interface line card and
switch fabric.
ToFabFIA - Represents the ToFabric FIA, FIA
which transmits data from the
line card to the fabric.
FrFabFIA - Represents the From Fabric FIA, FIA
which receives data from the fabric.
SCA - Scheduler Control Asic, this Asic
resides on each CSC and is used to
arbitrate among the line card
requests to transmit CiscoCells
through the switch fabric.
Xbar - Crossbar Switch Asic, this Asic
resides on each fabric card and provides
the functionality of a crossbar
switch.
SLI - Serial Link interface block, this
block resides on the FIA on the line
cards and the Xbar and SCA on the
switch fabric. The functionality of SLI
is to interface the linecards and fabric
cards.
BMA - Buffer Manager Asic, this Asic is
located on a Pre OC-192 linecard.
It provides the packet buffering
and buffer queue management.
MCC - Memory Communication Controller Asic,
this Asic is located on a OC-192
linecard and is an enhanced packet buffer
Asic. MCC captures the data and control
path information for packets destined
to all line cards in the system. On the
receive side MCC interfaces with the
Rx Asic where the packets are looked up
and sent to the MCC for buffering. On the
transmit side it interfaces with the
ToFabFIA where packets arrived from MCC
will be segmented into CiscoCells before
being sent across the fabric.
CSAR - Cisco Cell Segmentation And Reassembly,
The name of an FPGA used on the RP which
handles traffic between the processor
and switch fabric.
Request - A signal sent by a FIA (on a line card)
to the SCA (on Master CSC) requesting a
switch connection to a output linecard as an
intent to transmit CiscoCells across.
Grant - A signal sent by the SCA to a FIA (on a
line card) granting a switch connection which
was requested by the FIA.
SRAM - Static Random Access Memory.
LOS - Loss Of Signal.
FPGA - Field Programmable Gate Array.
ciscoFabricC12kMIB MODULE-IDENTITY LAST-UPDATED "200209200000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W. Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "Cisco Fabric MIB module for c12000 series of routers. This MIB module is used for managing/tracking the c12000 fabric entities and fabric related configuration, status and statistics information. C12000 fabric architecture is based on NxN non-blocking crossbar switch fabric, where N stands for the maximum number of LCs that can be supported in the chassis (this includes the RP). The connections through the switch fabric is controlled by a scheduler (CSC), the CSC accepts transmission requests from line cards, issues grants to access the fabric, and provides a reference clock to all the cards in the system to synchronize data transfer across the crossbar. Some of the error status objects in the MIB are read-clear, that is the value of the object is cleared on a query of the object. Details about the various fabric related attributes specified in the MIB could be found at following link, http://www.cisco.com/warp/public/108/hwts_12000_22281.html Acronyms and terms used in the MIB module: GSR - Gigabit Switch Router. RP - Route Processor. LC - Line Card. SFC - Switch Fabric Card. CRC - Cyclic Redundancy Check. CSC - Clock Scheduler Card. CiscoCell - The unit of data that is exchanged between line cards through the switch fabric. FIA - Fabric Interface Asic, this Asic resides on the line card and is used to interface line card and switch fabric. ToFabFIA - Represents the ToFabric FIA, FIA which transmits data from the line card to the fabric. FrFabFIA - Represents the From Fabric FIA, FIA which receives data from the fabric. SCA - Scheduler Control Asic, this Asic resides on each CSC and is used to arbitrate among the line card requests to transmit CiscoCells through the switch fabric. Xbar - Crossbar Switch Asic, this Asic resides on each fabric card and provides the functionality of a crossbar switch. SLI - Serial Link interface block, this block resides on the FIA on the line cards and the Xbar and SCA on the switch fabric. The functionality of SLI is to interface the linecards and fabric cards. BMA - Buffer Manager Asic, this Asic is located on a Pre OC-192 linecard. It provides the packet buffering and buffer queue management. MCC - Memory Communication Controller Asic, this Asic is located on a OC-192 linecard and is an enhanced packet buffer Asic. MCC captures the data and control path information for packets destined to all line cards in the system. On the receive side MCC interfaces with the Rx Asic where the packets are looked up and sent to the MCC for buffering. On the transmit side it interfaces with the ToFabFIA where packets arrived from MCC will be segmented into CiscoCells before being sent across the fabric. CSAR - Cisco Cell Segmentation And Reassembly, The name of an FPGA used on the RP which handles traffic between the processor and switch fabric. Request - A signal sent by a FIA (on a line card) to the SCA (on Master CSC) requesting a switch connection to a output linecard as an intent to transmit CiscoCells across. Grant - A signal sent by the SCA to a FIA (on a line card) granting a switch connection which was requested by the FIA. SRAM - Static Random Access Memory. LOS - Loss Of Signal. FPGA - Field Programmable Gate Array." REVISION "200209200000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 281 }
ciscoFabricC12kMIB OBJECT IDENTIFIER ::= { ciscoMgmt 281 }
Vendor: Cisco
Module: CISCO-FABRIC-C12K-MIB
[Automatically extracted from oidview.com]
ciscoFabricC12kMIB MODULE-IDENTITY LAST-UPDATED "200209200000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W. Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "Cisco Fabric MIB module for c12000 series of routers. This MIB module is used for managing/tracking the c12000 fabric entities and fabric related configuration, status and statistics information. C12000 fabric architecture is based on NxN non-blocking crossbar switch fabric, where N stands for the maximum number of LCs that can be supported in the chassis (this includes the RP). The connections through the switch fabric is controlled by a scheduler (CSC), the CSC accepts transmission requests from line cards, issues grants to access the fabric, and provides a reference clock to all the cards in the system to synchronize data transfer across the crossbar. Some of the error status objects in the MIB are read-clear, that is the value of the object is cleared on a query of the object. Details about the various fabric related attributes specified in the MIB could be found at following link, http://www.cisco.com/warp/public/108/hwts_12000_22281.html Acronyms and terms used in the MIB module: GSR - Gigabit Switch Router. RP - Route Processor. LC - Line Card. SFC - Switch Fabric Card. CRC - Cyclic Redundancy Check. CSC - Clock Scheduler Card. CiscoCell - The unit of data that is exchanged between line cards through the switch fabric. FIA - Fabric Interface Asic, this Asic resides on the line card and is used to interface line card and switch fabric. ToFabFIA - Represents the ToFabric FIA, FIA which transmits data from the line card to the fabric. FrFabFIA - Represents the From Fabric FIA, FIA which receives data from the fabric. SCA - Scheduler Control Asic, this Asic resides on each CSC and is used to arbitrate among the line card requests to transmit CiscoCells through the switch fabric. Xbar - Crossbar Switch Asic, this Asic resides on each fabric card and provides the functionality of a crossbar switch. SLI - Serial Link interface block, this block resides on the FIA on the line cards and the Xbar and SCA on the switch fabric. The functionality of SLI is to interface the linecards and fabric cards. BMA - Buffer Manager Asic, this Asic is located on a Pre OC-192 linecard. It provides the packet buffering and buffer queue management. MCC - Memory Communication Controller Asic, this Asic is located on a OC-192 linecard and is an enhanced packet buffer Asic. MCC captures the data and control path information for packets destined to all line cards in the system. On the receive side MCC interfaces with the Rx Asic where the packets are looked up and sent to the MCC for buffering. On the transmit side it interfaces with the ToFabFIA where packets arrived from MCC will be segmented into CiscoCells before being sent across the fabric. CSAR - Cisco Cell Segmentation And Reassembly, The name of an FPGA used on the RP which handles traffic between the processor and switch fabric. Request - A signal sent by a FIA (on a line card) to the SCA (on Master CSC) requesting a switch connection to a output linecard as an intent to transmit CiscoCells across. Grant - A signal sent by the SCA to a FIA (on a line card) granting a switch connection which was requested by the FIA. SRAM - Static Random Access Memory. LOS - Loss Of Signal. FPGA - Field Programmable Gate Array." REVISION "200209200000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 281 }
ciscoFabricC12kMIB MODULE-IDENTITY LAST-UPDATED "200209200000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W. Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "Cisco Fabric MIB module for c12000 series of routers. This MIB module is used for managing/tracking the c12000 fabric entities and fabric related configuration, status and statistics information. C12000 fabric architecture is based on NxN non-blocking crossbar switch fabric, where N stands for the maximum number of LCs that can be supported in the chassis (this includes the RP). The connections through the switch fabric is controlled by a scheduler (CSC), the CSC accepts transmission requests from line cards, issues grants to access the fabric, and provides a reference clock to all the cards in the system to synchronize data transfer across the crossbar. Some of the error status objects in the MIB are read-clear, that is the value of the object is cleared on a query of the object. Details about the various fabric related attributes specified in the MIB could be found at following link, http://www.cisco.com/warp/public/108/hwts_12000_22281.html Acronyms and terms used in the MIB module: GSR - Gigabit Switch Router. RP - Route Processor. LC - Line Card. SFC - Switch Fabric Card. CRC - Cyclic Redundancy Check. CSC - Clock Scheduler Card. CiscoCell - The unit of data that is exchanged between line cards through the switch fabric. FIA - Fabric Interface Asic, this Asic resides on the line card and is used to interface line card and switch fabric. ToFabFIA - Represents the ToFabric FIA, FIA which transmits data from the line card to the fabric. FrFabFIA - Represents the From Fabric FIA, FIA which receives data from the fabric. SCA - Scheduler Control Asic, this Asic resides on each CSC and is used to arbitrate among the line card requests to transmit CiscoCells through the switch fabric. Xbar - Crossbar Switch Asic, this Asic resides on each fabric card and provides the functionality of a crossbar switch. SLI - Serial Link interface block, this block resides on the FIA on the line cards and the Xbar and SCA on the switch fabric. The functionality of SLI is to interface the linecards and fabric cards. BMA - Buffer Manager Asic, this Asic is located on a Pre OC-192 linecard. It provides the packet buffering and buffer queue management. MCC - Memory Communication Controller Asic, this Asic is located on a OC-192 linecard and is an enhanced packet buffer Asic. MCC captures the data and control path information for packets destined to all line cards in the system. On the receive side MCC interfaces with the Rx Asic where the packets are looked up and sent to the MCC for buffering. On the transmit side it interfaces with the ToFabFIA where packets arrived from MCC will be segmented into CiscoCells before being sent across the fabric. CSAR - Cisco Cell Segmentation And Reassembly, The name of an FPGA used on the RP which handles traffic between the processor and switch fabric. Request - A signal sent by a FIA (on a line card) to the SCA (on Master CSC) requesting a switch connection to a output linecard as an intent to transmit CiscoCells across. Grant - A signal sent by the SCA to a FIA (on a line card) granting a switch connection which was requested by the FIA. SRAM - Static Random Access Memory. LOS - Loss Of Signal. FPGA - Field Programmable Gate Array." REVISION "200209200000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 281 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.281.0 | ciscoFabricC12kMIBNotifs | 1 | 1 | None |
| 1.3.6.1.4.1.9.9.281.1 | ciscoFabricC12kMIBObjects | 4 | 115 | None |
| 1.3.6.1.4.1.9.9.281.2 | ciscoFabricC12kMIBConform | 2 | 16 | None |
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.9.9.231 | ciscoItpTextualConventions | 0 | 0 | The defines textual conventions used by to manage devices related to the SS7 network. The relevant ITU documents describing this… |
| 1.3.6.1.4.1.9.9.232 | ciscoItpSpMIB | 3 | 384 | The MIB for managing Signalling Points and its associated messages transported over Signalling System No. 7 (SS7) Network via Ci… |
| 1.3.6.1.4.1.9.9.233 | ciscoItpSccpMIB | 3 | 194 | The MIB for Signaling Connection Control Part(SCCP) messages transported over Signalling System No. 7 (SS7) Network via Cisco IP … |
| 1.3.6.1.4.1.9.9.234 | ciscoWanTopologyMIB | 3 | 83 | A management station can use this MIB module for the maintenance of persistent topology information of the PNNI network. Previous… |
| 1.3.6.1.4.1.9.9.235 | ciscoImaMIB | 2 | 60 | The MIB module describes Cisco IMA objects. This is an extension to the standard of ATM Forum IMA version 1.1, AF-PHY-0086.001 Spe… |
| 1.3.6.1.4.1.9.9.236 | ciscoWanSctMgmtMIB | 2 | 18 | MIB module to manage SCT files in a node. SCTs (Service Class Templates) are nodal configuration files, which define the traffic … |
| 1.3.6.1.4.1.9.9.237 | ciscoNmsApplHealthMIB | 3 | 21 | This MIB defines Cisco NMS Application (cna) Health Status Notifications and the related objects. These notifications will be sen… |
| 1.3.6.1.4.1.9.9.238 | ciscoIGMPFilterMIB | 2 | 45 | IGMP Filter configuration MIB. This MIB provides a mechanism for users to configure the system to intercept IGMP joins for IP Mul… |
| 1.3.6.1.4.1.9.9.240 | cGgsnMIB | 3 | 389 | This MIB module manages the Gateway GPRS Support Node (GGSN) devices. A GGSN device provides interworking with external packet-dat… |
| 1.3.6.1.4.1.9.9.241 | cggsnQosMIB | 2 | 89 | This MIB module manages the Quality of Service parameters of GGSN in a GPRS system. GGSN is the Gateway GPRS Support Node in the … |
| 1.3.6.1.4.1.9.9.242 | ciscoCableAvailabilityMIB | 3 | 60 | This is the MIB module for management of Hot Standby Connection to Connection Protocol (HCCP) features. HCCP is a Cisco proprieta… |
| 1.3.6.1.4.1.9.9.243 | ciscoHealthMonitorMIB | 3 | 22 | Health Monitor MIB module. The Health Monitor uses a model based on events of varying severity and frequency, and predefined rule… |
| 1.3.6.1.4.1.9.9.244 | ciscoNbarProtocolDiscoveryMIB | 3 | 84 | Cisco NBAR Protocol Discovery MIB NBAR - Network Based Application Recognition is an intelligent classification engine that reco… |
| 1.3.6.1.4.1.9.9.245 | ciscoGtpDirectorMIB | 3 | 35 | This MIB module defines objects that are used to manage GTP Director Module. In the GPRS network, the APN is the identifier that s… |
| 1.3.6.1.4.1.9.9.246 | ciscoL2TunnelConfigMIB | 3 | 65 | This MIB module is for layer 2 tunneling related configurations on a device. Tunneling allows separate local networks to be consi… |
| 1.3.6.1.4.1.9.9.248 | ciscoItpSp2MIB | 3 | 30 | The MIB for providing information specified in ITU Q752 Monitoring and Measurements for Signaling System No. 7(SS7) Network. This … |
| 1.3.6.1.4.1.9.9.249 | ciscoEnhancedImageMIB | 2 | 44 | Initial version of the MIB. This MIB has Image table containing the following information related to the running IOS image 1. Enti… |
| 1.3.6.1.4.1.9.9.252 | cTapMIB | 3 | 80 | This module manages Cisco's intercept feature. |
| 1.3.6.1.4.1.9.9.253 | ciscoItpXuaMIB | 3 | 250 | The MIB for MTP3 User Adaptation (M3UA) and SCCP User Adaptation (SUA) for Cisco's IP Transfer Point (ITP) implementation. The Cis… |
| 1.3.6.1.4.1.9.9.254 | ciscoSlbExtMIB | 3 | 425 | The extended MIB for managing Server Load Balancing Manager(s). This MIB extends the SLB management functionality in the CISCO-SL… |
| 1.3.6.1.4.1.9.9.255 | ciscoFabricMcastMIB | 3 | 30 | Fabric Multicast Resource MIB module. This MIB module is used for managing/tracking the fabric multicast resource related informa… |
| 1.3.6.1.4.1.9.9.256 | ciscoFabricMcastApplMIB | 3 | 16 | Fabric multicast resource MIB module. This MIB module is used for managing/tracking the fabric multicast resource application rel… |
| 1.3.6.1.4.1.9.9.257 | ciscoFabricHfrMIB | 3 | 90 | Cisco Enhanced Benes fabric MIB module. This MIB module is used for managing/tracking the Ehanced Benes Fabric entities and/or fa… |
| 1.3.6.1.4.1.9.9.259 | ciscoPsaMicrocodeMIB | 3 | 24 | Cisco PSA Microcode MIB - Overview The PSA is the Packet Switching ASIC used in module like engine 2(E2) line cards in GSR for IP … |
| 1.3.6.1.4.1.9.9.260 | ciscoSsgMIB | 3 | 218 | The MIB Module manages Service Selection Gateway(SSG) devices. Service Selection Gateway(SSG) is a switching solution for service… |
| 1.3.6.1.4.1.9.9.261 | ciscoPtopoExtnMIB | 2 | 18 | This MIB module contains extensions to the PTOPO-MIB that provide support to distinguish between bidirectional and unidirectional… |
| 1.3.6.1.4.1.9.9.262 | ciscoVoaMIB | 2 | 14 | This MIB module defines objects to configure and manage the Variable Optical Attenuator (VOA) modules. VOA modules are typically … |
| 1.3.6.1.4.1.9.9.263 | ciscoIgmpSnoopingMIB | 3 | 286 | The MIB module for IGMP Snooping feature. Internet Group Management Protocol (IGMP) is the protocol used by IPv4 end hosts to ind… |
| 1.3.6.1.4.1.9.9.264 | ciscoOpticalMonitorMIB | 3 | 72 | This MIB module defines objects to monitor optical characteristics and set corresponding thresholds on the optical interfaces in … |
| 1.3.6.1.4.1.9.9.265 | ciscoEntityPfeMib | 3 | 58 | The Packet Forwarding Engine technology are Cisco developed Network Processors, which accelerates certain features in order to pr… |
| 1.3.6.1.4.1.9.9.268 | ciscoWlanVlanMIB | 3 | 41 | This MIB module provides network management support for device VLAN configuration on IEEE 802.11 wireless LAN. ACRONYMS AES Advanced… |
| 1.3.6.1.4.1.9.9.269 | ciscoTBridgeDevIfMIB | 2 | 20 | This MIB module provides network management support for configuration and status information of devices supporting transparent br… |
| 1.3.6.1.4.1.9.9.270 | ciscoSyslogEventExtMIB | 2 | 21 | This MIB module extends the Cisco Syslog MIB and provides network management support to handle and process Syslog messages as devi… |
| 1.3.6.1.4.1.9.9.271 | ciscoL2DevMonMIB | 3 | 24 | This MIB module is for monitoring of active layer 2 devices by hot standby layer 2 devices and the configuration of hot standby s… |
| 1.3.6.1.4.1.9.9.272 | ciscoDot11IfMIB | 3 | 212 | This MIB module provides network management support for Cisco IEEE 802.11 Wireless LAN type device (Access Point) radio interface… |
| 1.3.6.1.4.1.9.9.273 | ciscoDot11AssociationMIB | 2 | 91 | This MIB module provides network management information on IEEE 802.11 wireless device association management and data packet for… |
| 1.3.6.1.4.1.9.9.275 | ciscoBcpMIB | 2 | 25 | This MIB module describes the Managed Objects for of Bridge Control Protocol (RFC2878). This MIB is influenced by RFC1474. |
| 1.3.6.1.4.1.9.9.276 | ciscoIfExtensionMIB | 3 | 143 | A MIB module for extending the IF-MIB (RFC2863) to add objects which provide additional information about interfaces not availabl… |
| 1.3.6.1.4.1.9.9.277 | ciscoDdpIappMIB | 3 | 22 | This MIB module describes the management support for the Inter-Access Point Protocol (IAPP). IAPP is a Cisco propriety Data Deli… |
| 1.3.6.1.4.1.9.9.278 | ciscoIpProtocolMIB | 3 | 63 | The MIB module is for management of information to support packet filtering on IP protocols. The cippfIpProfileTable allows users… |
| 1.3.6.1.4.1.9.9.279 | ciscoAtmQosMIB | 3 | 67 | The MIB is created to provide ATM QoS information in these areas: 1. Traffic shaping on a per-VC basis 2. Traffic shaping on a pe… |
| 1.3.6.1.4.1.9.9.280 | ciscoOutageMIB | 3 | 75 | This MIB module describes, stores, and reports outage related information generated by individual hardware and software component… |
| 1.3.6.1.4.1.9.9.282 | ciscoVsanMIB | 2 | 104 | The MIB module for the management of the Virtual Storage Networks (VSANs) within the frame work of Cisco's VSAN Architecture. T… |
| 1.3.6.1.4.1.9.9.284 | ciscoFcRouteMIB | 2 | 55 | The MIB module for configuring and displaying FC (Fibre Channel) Route Information. |
| 1.3.6.1.4.1.9.9.285 | ciscoPortChannelMIB | 2 | 40 | The MIB module for management of Port Channel ports. In addition to this MIB, CISCO-FC-FE-MIB and interface mib (rfc2863) will al… |
| 1.3.6.1.4.1.9.9.286 | ciscoWwnmgrMIB | 2 | 38 | The World Wide Name (WWN) in the fibre channel networking technology is equivalent to the MAC address in Ethernet. There are six … |
| 1.3.6.1.4.1.9.9.287 | ciscoFspfMIB | 4 | 95 | Fabric Shortest Path First (FSPF) MIB. |
| 1.3.6.1.4.1.9.9.288 | ciscoRadiusMIB | 3 | 91 | MIB module for monitoring and configuring authentication and logging services using RADIUS (Remote Authentication Dial In User Se… |
| 1.3.6.1.4.1.9.9.289 | ciscoFcFeMIB | 2 | 315 | This is the Cisco fibre element management MIB module. It covers: - Cisco extension to the interface MIB ( IF-MIB ) - Contains all… |
| 1.3.6.1.4.1.9.9.290 | ciscoVirtualNwIfMIB | 2 | 22 | The MIB module for management of virtual network interfaces to VSAN and VLAN. |
| 1.3.6.1.4.1.9.9.292 | ciscoRscnMIB | 2 | 67 | The MIB module for the management of the Fibre Channel's Registered State Change Notification (RSCN) functionality, which is spec… |
| 1.3.6.1.4.1.9.9.293 | ciscoNsMIB | 2 | 67 | The MIB module for the management of the Cisco Name Server which realizes the FC-GS3 requirements for Name Server (NS). |
| 1.3.6.1.4.1.9.9.294 | ciscoZsMIB | 2 | 254 | The MIB module for the management of zoning within the framework of Cisco's Zoning Server (ZS) Archi- tecture which realizes the … |
| 1.3.6.1.4.1.9.9.295 | ciscoFcPingMIB | 2 | 37 | The MIB module for the management of the Fibre Channel Ping functionality. |
| 1.3.6.1.4.1.9.9.296 | ciscoFcTraceRouteMIB | 2 | 31 | The MIB module for the management of the Fibre Channel Trace Route functionality. |
| 1.3.6.1.4.1.9.9.297 | ciscoFcsMIB | 2 | 122 | The MIB module for the management of a Fabric Configuration Server (FCS). An FCS is defined by the FC-GS3 standard. This MIB ena… |
| 1.3.6.1.4.1.9.9.299 | ciscoExtScsiMIB | 2 | 68 | The Cisco extension to CISCO-SCSI-MIB which is a copy of the Internet draft, the SCSI-MIB, from the IETF. Glossary of terms used i… |
| 1.3.6.1.4.1.9.9.300 | ciscoCallHomeMIB | 3 | 324 | The MIB module for the management of Call Home feature within the framework of Cisco's Call Home architecture. Customers deployin… |
| 1.3.6.1.4.1.9.9.301 | ciscoSyslogExtMIB | 2 | 44 | MIB module for configuring and monitoring System Log related management parameters as defined by RFC 3164. |
| 1.3.6.1.4.1.9.9.302 | ciscoDmMIB | 2 | 85 | The MIB module for the domain management functionality defined by the Fibre Channel standards (FC-SW2). For the purposes of this … |
| 1.3.6.1.4.1.9.9.305 | ciscoSystemExtMIB | 3 | 112 | MIB module for monitoring High Availability, SNMP SET errors and bandwidths. This mib module also provides the information on co… |
| 1.3.6.1.4.1.9.9.309 | ciscoIPIfMIB | 3 | 40 | The MIB module for configuring IP characteristics of the interfaces of a device. |
| 1.3.6.1.4.1.9.9.311 | ciscoEpmNotificationMIB | 3 | 48 | Notifications directly from hardware and software and processed notifications from various management applications can be furthe… |
| 1.3.6.1.4.1.9.9.312 | ciscoDataCollectionMIB | 3 | 84 | The MIB module allows a management application to select a set of MIB object instances whose values need to be collected on a per… |
| 1.3.6.1.4.1.9.9.313 | ciscoL2ControlMIB | 3 | 113 | The CISCO-L2-CONTROL-MIB is used to control some layer 2 functions, including MAC limit function and unicast flooding. This devi… |
| 1.3.6.1.4.1.9.9.314 | ciscoCasIfExtMIB | 3 | 225 | The MIB module is an extension of CISCO-CAS-IF-MIB. It defines the attributes of a voice interface. |
| 1.3.6.1.4.1.9.9.315 | ciscoPortSecurityMIB | 3 | 89 | The MIB module for managing Cisco Port Security. |
| 1.3.6.1.4.1.9.9.317 | ciscoIscsiGwMIB | 3 | 145 | MIB module for monitoring and configuring iSCSI gateway functions. An iSCSI gateway represents FC (Fibre Channel) targets/initiat… |
| 1.3.6.1.4.1.9.9.318 | ciscoXgcpMIB | 3 | 120 | This MIB is an enhancement for existing XGCP-MIB. xGCP is a set of protocols, for example SGCP (Simple Gateway Control Protocol) … |
| 1.3.6.1.4.1.9.9.319 | ciscoPropAtmIfMIB | 3 | 57 | This MIB is designed for Propietary ATM (propAtm) interfaces. The propAtm interfaces are identified in the ifTable entries with if… |
| 1.3.6.1.4.1.9.9.321 | ciscoMgcMIB | 3 | 43 | This MIB is used to support MGC(call agent) and MGC Group configuration. The MGC or MGC group configuration is performed under a s… |
| 1.3.6.1.4.1.9.9.322 | ccacSysMIB | 2 | 60 | This MIB module provides provisioning and monitoring Call Admission Control (CAC). |
| 1.3.6.1.4.1.9.9.323 | ciscoVoiceAalxProfileMIB | 3 | 87 | This MIB defines the objects specific to voice over ATM or voice over IP. Those objects are related to the following areas: 1. COD… |
| 1.3.6.1.4.1.9.9.324 | ciscoMediaGatewayMIB | 3 | 107 | The MIB module for managing Trunk Media Gateway. A Media Gateway is a network element that provides conversion between the audio … |
| 1.3.6.1.4.1.9.9.325 | ciscoXgcpExtMIB | 2 | 65 | This MIB module is an extension to CISCO-XGCP-MIB. It defines the parameters related to the following aspects in xGCP protocols: *… |
| 1.3.6.1.4.1.9.9.326 | ciscoIpLocalPoolMIB | 3 | 57 | This MIB defines the configuration and monitoring capabilities relating to local IP pools. Local IP pools have the following char… |
| 1.3.6.1.4.1.9.9.329 | ciscoFcipMgmtExtMIB | 3 | 75 | A MIB module for extending the CISCO-FCIP-MGMT-MIB to add objects which provide additional information about FCIP interfaces not … |
| 1.3.6.1.4.1.9.9.330 | ciscoSysInfoLogMIB | 3 | 44 | This MIB provides the configuration of System Information Logging feature, which allows a certain number of commands to be execut… |
| 1.3.6.1.4.1.9.9.331 | ciscoCsgMIB | 3 | 86 | This MIB supports the Cisco Content Services Gateway (CSG) product. It includes five traps and four tables that enable querying C… |
| ... | ||||