This MIB module defines objects that are used to
manage GTP Director Module.
In the GPRS network, the APN is the identifier that
specifies where the user is connecting. The APN
identifies whether the network is a corporate network
or a service provider network. The APN comprises of
two parts, the network id and the operator id.
The Single Access point feature enables the
service provider to add new access-points to the GGSN
without having to provision the HLR. The requests are
sent by the SGSN to the same virtual APN. A virtual
APN is not associated with any actual physical
network. The GGSN processes the request and forwards
the packet to the appropriate access-point that is
specified in the PCO. The Single APN feature is
supported only in Cisco GGSNs.
The purpose of the GTP-Director is to provide a
mechanism for service providers using non-Cisco GGSN
to use the Single APN feature. This would enable the
service providers to add access-point to the network
without having to provision the HLR. This will be
transparent to the SGSN. The mobile user initiates
a connection request to the SGSN. The access-point
name specified in the request is the virtual APN.
The GTP-Director would resolve the access-point name
and forward the request to the appropriate
GGSN (real GGSN).
+==+ +===+ +====+ ==== +===+ +====+ +===+
|MS|
+==+ +===+ +====+ ==== +===+ +====+ +===+
| |
| | +====+
| |___|GGSN|
| +====+ |
| |
| +====+ +===+
|_____|GGSN|
+====+ +===+
The GTP-Director also provides load balancing across
GGSNs. The GTP-Director uses the round-robin
mechanism for providing load balancing. The
Cisco GGSNs may use the GTP-Director, but is not
necessary as they can use IOS-SLB ( Server Load
Balancing ).
Acronyms and terms:
APN Access Point Name
BSS Base Staion Subsystem
GDM GTP Director Module
GGSN Gateway GPRS Support Node
Gi Reference point between GPRS and an external
packet data network
GPRS General Packet Radio Service
HLR Home Location Register
NMS Network Management System
PCO Protocol Configuration Options
PDN Packet Data Network
PDP Packet Data Protocol
PLMN Public Land Mobile Network
MS Mobile Station
SGSN Serving GPRS Support Node
TID Tunnel Identifier
This MIB module defines objects that are used to
manage GTP Director Module.
In the GPRS network, the APN is the identifier that
specifies where the user is connecting. The APN
identifies whether the network is a corporate network
or a service provider network. The APN comprises of
two parts, the network id and the operator id.
The Single Access point feature enables the
service provider to add new access-points to the GGSN
without having to provision the HLR. The requests are
sent by the SGSN to the same virtual APN. A virtual
APN is not associated with any actual physical
network. The GGSN processes the request and forwards
the packet to the appropriate access-point that is
specified in the PCO. The Single APN feature is
supported only in Cisco GGSNs.
The purpose of the GTP-Director is to provide a
mechanism for service providers using non-Cisco GGSN
to use the Single APN feature. This would enable the
service providers to add access-point to the network
without having to provision the HLR. This will be
transparent to the SGSN. The mobile user initiates
a connection request to the SGSN. The access-point
name specified in the request is the virtual APN.
The GTP-Director would resolve the access-point name
and forward the request to the appropriate
GGSN (real GGSN).
+==+ +===+ +====+ ==== +===+ +====+ +===+
|MS|
+==+ +===+ +====+ ==== +===+ +====+ +===+
| |
| | +====+
| |___|GGSN|
| +====+ |
| |
| +====+ +===+
|_____|GGSN|
+====+ +===+
The GTP-Director also provides load balancing across
GGSNs. The GTP-Director uses the round-robin
mechanism for providing load balancing. The
Cisco GGSNs may use the GTP-Director, but is not
necessary as they can use IOS-SLB ( Server Load
Balancing ).
Acronyms and terms:
APN Access Point Name
BSS Base Staion Subsystem
GDM GTP Director Module
GGSN Gateway GPRS Support Node
Gi Reference point between GPRS and an external
packet data network
GPRS General Packet Radio Service
HLR Home Location Register
NMS Network Management System
PCO Protocol Configuration Options
PDN Packet Data Network
PDP Packet Data Protocol
PLMN Public Land Mobile Network
MS Mobile Station
SGSN Serving GPRS Support Node
TID Tunnel Identifier
Parsed from file CISCO-GTP-DIRECTOR-MIB.mib
Module: CISCO-GTP-DIRECTOR-MIB
Vendor: Cisco
Module: CISCO-GTP-DIRECTOR-MIB
[Automatically extracted from oidview.com]
ciscoGtpDirectorMIB MODULE-IDENTITY LAST-UPDATED "200109131400Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This MIB module defines objects that are used to manage GTP Director Module. In the GPRS network, the APN is the identifier that specifies where the user is connecting. The APN identifies whether the network is a corporate network or a service provider network. The APN comprises of two parts, the network id and the operator id. The Single Access point feature enables the service provider to add new access-points to the GGSN without having to provision the HLR. The requests are sent by the SGSN to the same virtual APN. A virtual APN is not associated with any actual physical network. The GGSN processes the request and forwards the packet to the appropriate access-point that is specified in the PCO. The Single APN feature is supported only in Cisco GGSNs. The purpose of the GTP-Director is to provide a mechanism for service providers using non-Cisco GGSN to use the Single APN feature. This would enable the service providers to add access-point to the network without having to provision the HLR. This will be transparent to the SGSN. The mobile user initiates a connection request to the SGSN. The access-point name specified in the request is the virtual APN. The GTP-Director would resolve the access-point name and forward the request to the appropriate GGSN (real GGSN). +==+ +===+ +====+ ==== +===+ +====+ +===+ |MS| +==+ +===+ +====+ ==== +===+ +====+ +===+ | | | | +====+ | |___|GGSN| | +====+ | | | | +====+ +===+ |_____|GGSN| +====+ +===+ The GTP-Director also provides load balancing across GGSNs. The GTP-Director uses the round-robin mechanism for providing load balancing. The Cisco GGSNs may use the GTP-Director, but is not necessary as they can use IOS-SLB ( Server Load Balancing ). Acronyms and terms: APN Access Point Name BSS Base Staion Subsystem GDM GTP Director Module GGSN Gateway GPRS Support Node Gi Reference point between GPRS and an external packet data network GPRS General Packet Radio Service HLR Home Location Register NMS Network Management System PCO Protocol Configuration Options PDN Packet Data Network PDP Packet Data Protocol PLMN Public Land Mobile Network MS Mobile Station SGSN Serving GPRS Support Node TID Tunnel Identifier " REVISION "200109131400Z" DESCRIPTION "Initial version of this MIB Module." ::= { ciscoMgmt 245 }
ciscoGtpDirectorMIB MODULE-IDENTITY LAST-UPDATED "200109131400Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This MIB module defines objects that are used to manage GTP Director Module. In the GPRS network, the APN is the identifier that specifies where the user is connecting. The APN identifies whether the network is a corporate network or a service provider network. The APN comprises of two parts, the network id and the operator id. The Single Access point feature enables the service provider to add new access-points to the GGSN without having to provision the HLR. The requests are sent by the SGSN to the same virtual APN. A virtual APN is not associated with any actual physical network. The GGSN processes the request and forwards the packet to the appropriate access-point that is specified in the PCO. The Single APN feature is supported only in Cisco GGSNs. The purpose of the GTP-Director is to provide a mechanism for service providers using non-Cisco GGSN to use the Single APN feature. This would enable the service providers to add access-point to the network without having to provision the HLR. This will be transparent to the SGSN. The mobile user initiates a connection request to the SGSN. The access-point name specified in the request is the virtual APN. The GTP-Director would resolve the access-point name and forward the request to the appropriate GGSN (real GGSN). +==+ +===+ +====+ ==== +===+ +====+ +===+ |MS| +==+ +===+ +====+ ==== +===+ +====+ +===+ | | | | +====+ | |___|GGSN| | +====+ | | | | +====+ +===+ |_____|GGSN| +====+ +===+ The GTP-Director also provides load balancing across GGSNs. The GTP-Director uses the round-robin mechanism for providing load balancing. The Cisco GGSNs may use the GTP-Director, but is not necessary as they can use IOS-SLB ( Server Load Balancing ). Acronyms and terms: APN Access Point Name BSS Base Staion Subsystem GDM GTP Director Module GGSN Gateway GPRS Support Node Gi Reference point between GPRS and an external packet data network GPRS General Packet Radio Service HLR Home Location Register NMS Network Management System PCO Protocol Configuration Options PDN Packet Data Network PDP Packet Data Protocol PLMN Public Land Mobile Network MS Mobile Station SGSN Serving GPRS Support Node TID Tunnel Identifier " REVISION "200109131400Z" DESCRIPTION "Initial version of this MIB Module." ::= { ciscoMgmt 245 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.245.1 | ciscoGtpDirectorMIBObjects | 4 | 22 | None |
| 1.3.6.1.4.1.9.9.245.2 | ciscoGtpDirectorNotifPrefix | 1 | 2 | None |
| 1.3.6.1.4.1.9.9.245.3 | ciscoGtpDirectorMIBConformance | 2 | 8 | None |
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.9.9.195 | ciscoEntityExtMIB | 3 | 64 | This MIB is an extension of the ENTITY-MIB specified in RFC2737. This MIB module contains Cisco-defined extensions to the entit… |
| 1.3.6.1.4.1.9.9.197 | ciscoDistDirMIB | 3 | 123 | Cisco Distributed Director MIB. The Cisco Distributed Director provides global Internet scalability and increased performance as … |
| 1.3.6.1.4.1.9.9.198 | ciscoRfSupMIB | 3 | 58 | This MIB was designed to complement the CISCO-RF-MIB by providing additional optional status and configuration control for redund… |
| 1.3.6.1.4.1.9.9.199 | ciscoSmFileDownloadMIB | 3 | 23 | The MIB module for downloading files to the Service Modules specifically designed for an architecture containing a controller car… |
| 1.3.6.1.4.1.9.9.201 | ciscoSwitchUsageMIB | 3 | 15 | This MIB defines objects related to statistics for the usage of switch fabric. The switch fabric is used by the incoming packets … |
| 1.3.6.1.4.1.9.9.202 | ciscoOscpMIB | 3 | 52 | The MIB module for managing the Cisco Optical Supervisory Channel Protocol (OSCP). The OSCP is used to determine and maintain wav… |
| 1.3.6.1.4.1.9.9.204 | ciscoXdslLineMIB | 2 | 32 | The tables defined by this MIB module contain a collection of managed objects that are general in nature and apply to different t… |
| 1.3.6.1.4.1.9.9.215 | ciscoMacNotificationMIB | 3 | 72 | This MIB module is for configuration of the MAC notification feature. MAC notification is a mechanism to inform monitoring device… |
| 1.3.6.1.4.1.9.9.216 | ciscoContentNetworkMIB | 3 | 34 | This MIB module defines objects for Content Network devices. A Content Network is a collection of devices that optimizes the deli… |
| 1.3.6.1.4.1.9.9.217 | ciscoCat6kCrossbarMIB | 3 | 210 | The Catalyst 6000 Crossbar MIB provides instrumentation for configuration and operation of the crossbar switching fabric module, … |
| 1.3.6.1.4.1.9.9.218 | ciscoIfThresholdMIB | 3 | 65 | ciscoIfthresholdMIB |
| 1.3.6.1.4.1.9.9.219 | ciscoVoiceDnisMIB | 3 | 24 | The MIB module provides management support for Dialer Number Information Service (DNIS) mapping. A DNIS entry is associated with… |
| 1.3.6.1.4.1.9.9.220 | ciscoPaeMIB | 3 | 231 | Cisco Port Access Entity (PAE) module for managing IEEE Std 802.1x. This MIB provides Port Access Entity information that are eith… |
| 1.3.6.1.4.1.9.9.221 | ciscoEnhancedMemPoolMIB | 3 | 87 | New MIB module for monitoring the memory pools of all physical entities on a managed system. |
| 1.3.6.1.4.1.9.9.222 | ciscoEnhancedWredMIB | 3 | 70 | Cisco WRED MIB - Overview Cisco Weighted Random Early Detection/Drop (WRED) is a method which avoids traffic congestion on an outp… |
| 1.3.6.1.4.1.9.9.223 | ciscoWanNcdpMIB | 3 | 58 | This MIB module is intended for the management of network clock distribution and the Network Clock Distribution Protocol (NCDP) i… |
| 1.3.6.1.4.1.9.9.224 | ciscoDevExcepReportMIB | 3 | 29 | This mib defines the SNMP objects to report exceptions to north-bound NMS. The devices implementing this MIB monitor the status of… |
| 1.3.6.1.4.1.9.9.225 | ciscoLagMIB | 3 | 56 | Cisco Link Aggregation module for managing IEEE Std 802.3ad. This MIB provides Link Aggregation information that are either exclud… |
| 1.3.6.1.4.1.9.9.226 | ciscoNDEMIB | 4 | 17 | The Netflow Data Export (NDE) MIB provides instrumentation for configuration and operation of the Netflow Data Export feature. A … |
| 1.3.6.1.4.1.9.9.227 | ciscoItpAclMIB | 3 | 45 | The MIB for managing access lists that control messages transported over Signalling System No. 7 (SS7) Network via Cisco IP Trans… |
| 1.3.6.1.4.1.9.9.228 | ciscoItpRtMIB | 3 | 47 | This MIB is for managing information required to route messages transported over Signalling System No. 7 (SS7) Network via Cisco … |
| 1.3.6.1.4.1.9.9.229 | ciscoDs1ExtMIB | 2 | 129 | The MIB module to describe DS1/E1 interface objects. This is an extension to the standard DS1/E1 MIB (RFC 2495). Unless mentioned… |
| 1.3.6.1.4.1.9.9.230 | ciscoItpActMIB | 3 | 29 | The MIB for providing information specified in ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network. This… |
| 1.3.6.1.4.1.9.9.231 | ciscoItpTextualConventions | 0 | 0 | The defines textual conventions used by to manage devices related to the SS7 network. The relevant ITU documents describing this… |
| 1.3.6.1.4.1.9.9.232 | ciscoItpSpMIB | 3 | 384 | The MIB for managing Signalling Points and its associated messages transported over Signalling System No. 7 (SS7) Network via Ci… |
| 1.3.6.1.4.1.9.9.233 | ciscoItpSccpMIB | 3 | 194 | The MIB for Signaling Connection Control Part(SCCP) messages transported over Signalling System No. 7 (SS7) Network via Cisco IP … |
| 1.3.6.1.4.1.9.9.234 | ciscoWanTopologyMIB | 3 | 83 | A management station can use this MIB module for the maintenance of persistent topology information of the PNNI network. Previous… |
| 1.3.6.1.4.1.9.9.235 | ciscoImaMIB | 2 | 60 | The MIB module describes Cisco IMA objects. This is an extension to the standard of ATM Forum IMA version 1.1, AF-PHY-0086.001 Spe… |
| 1.3.6.1.4.1.9.9.236 | ciscoWanSctMgmtMIB | 2 | 18 | MIB module to manage SCT files in a node. SCTs (Service Class Templates) are nodal configuration files, which define the traffic … |
| 1.3.6.1.4.1.9.9.237 | ciscoNmsApplHealthMIB | 3 | 21 | This MIB defines Cisco NMS Application (cna) Health Status Notifications and the related objects. These notifications will be sen… |
| 1.3.6.1.4.1.9.9.238 | ciscoIGMPFilterMIB | 2 | 45 | IGMP Filter configuration MIB. This MIB provides a mechanism for users to configure the system to intercept IGMP joins for IP Mul… |
| 1.3.6.1.4.1.9.9.240 | cGgsnMIB | 3 | 389 | This MIB module manages the Gateway GPRS Support Node (GGSN) devices. A GGSN device provides interworking with external packet-dat… |
| 1.3.6.1.4.1.9.9.241 | cggsnQosMIB | 2 | 89 | This MIB module manages the Quality of Service parameters of GGSN in a GPRS system. GGSN is the Gateway GPRS Support Node in the … |
| 1.3.6.1.4.1.9.9.242 | ciscoCableAvailabilityMIB | 3 | 60 | This is the MIB module for management of Hot Standby Connection to Connection Protocol (HCCP) features. HCCP is a Cisco proprieta… |
| 1.3.6.1.4.1.9.9.243 | ciscoHealthMonitorMIB | 3 | 22 | Health Monitor MIB module. The Health Monitor uses a model based on events of varying severity and frequency, and predefined rule… |
| 1.3.6.1.4.1.9.9.244 | ciscoNbarProtocolDiscoveryMIB | 3 | 84 | Cisco NBAR Protocol Discovery MIB NBAR - Network Based Application Recognition is an intelligent classification engine that reco… |
| 1.3.6.1.4.1.9.9.246 | ciscoL2TunnelConfigMIB | 3 | 65 | This MIB module is for layer 2 tunneling related configurations on a device. Tunneling allows separate local networks to be consi… |
| 1.3.6.1.4.1.9.9.248 | ciscoItpSp2MIB | 3 | 30 | The MIB for providing information specified in ITU Q752 Monitoring and Measurements for Signaling System No. 7(SS7) Network. This … |
| 1.3.6.1.4.1.9.9.249 | ciscoEnhancedImageMIB | 2 | 44 | Initial version of the MIB. This MIB has Image table containing the following information related to the running IOS image 1. Enti… |
| 1.3.6.1.4.1.9.9.252 | cTapMIB | 3 | 80 | This module manages Cisco's intercept feature. |
| 1.3.6.1.4.1.9.9.253 | ciscoItpXuaMIB | 3 | 250 | The MIB for MTP3 User Adaptation (M3UA) and SCCP User Adaptation (SUA) for Cisco's IP Transfer Point (ITP) implementation. The Cis… |
| 1.3.6.1.4.1.9.9.254 | ciscoSlbExtMIB | 3 | 425 | The extended MIB for managing Server Load Balancing Manager(s). This MIB extends the SLB management functionality in the CISCO-SL… |
| 1.3.6.1.4.1.9.9.255 | ciscoFabricMcastMIB | 3 | 30 | Fabric Multicast Resource MIB module. This MIB module is used for managing/tracking the fabric multicast resource related informa… |
| 1.3.6.1.4.1.9.9.256 | ciscoFabricMcastApplMIB | 3 | 16 | Fabric multicast resource MIB module. This MIB module is used for managing/tracking the fabric multicast resource application rel… |
| 1.3.6.1.4.1.9.9.257 | ciscoFabricHfrMIB | 3 | 90 | Cisco Enhanced Benes fabric MIB module. This MIB module is used for managing/tracking the Ehanced Benes Fabric entities and/or fa… |
| 1.3.6.1.4.1.9.9.259 | ciscoPsaMicrocodeMIB | 3 | 24 | Cisco PSA Microcode MIB - Overview The PSA is the Packet Switching ASIC used in module like engine 2(E2) line cards in GSR for IP … |
| 1.3.6.1.4.1.9.9.260 | ciscoSsgMIB | 3 | 218 | The MIB Module manages Service Selection Gateway(SSG) devices. Service Selection Gateway(SSG) is a switching solution for service… |
| 1.3.6.1.4.1.9.9.261 | ciscoPtopoExtnMIB | 2 | 18 | This MIB module contains extensions to the PTOPO-MIB that provide support to distinguish between bidirectional and unidirectional… |
| 1.3.6.1.4.1.9.9.262 | ciscoVoaMIB | 2 | 14 | This MIB module defines objects to configure and manage the Variable Optical Attenuator (VOA) modules. VOA modules are typically … |
| 1.3.6.1.4.1.9.9.263 | ciscoIgmpSnoopingMIB | 3 | 286 | The MIB module for IGMP Snooping feature. Internet Group Management Protocol (IGMP) is the protocol used by IPv4 end hosts to ind… |
| 1.3.6.1.4.1.9.9.264 | ciscoOpticalMonitorMIB | 3 | 72 | This MIB module defines objects to monitor optical characteristics and set corresponding thresholds on the optical interfaces in … |
| 1.3.6.1.4.1.9.9.265 | ciscoEntityPfeMib | 3 | 58 | The Packet Forwarding Engine technology are Cisco developed Network Processors, which accelerates certain features in order to pr… |
| 1.3.6.1.4.1.9.9.268 | ciscoWlanVlanMIB | 3 | 41 | This MIB module provides network management support for device VLAN configuration on IEEE 802.11 wireless LAN. ACRONYMS AES Advanced… |
| 1.3.6.1.4.1.9.9.269 | ciscoTBridgeDevIfMIB | 2 | 20 | This MIB module provides network management support for configuration and status information of devices supporting transparent br… |
| 1.3.6.1.4.1.9.9.270 | ciscoSyslogEventExtMIB | 2 | 21 | This MIB module extends the Cisco Syslog MIB and provides network management support to handle and process Syslog messages as devi… |
| 1.3.6.1.4.1.9.9.271 | ciscoL2DevMonMIB | 3 | 24 | This MIB module is for monitoring of active layer 2 devices by hot standby layer 2 devices and the configuration of hot standby s… |
| 1.3.6.1.4.1.9.9.272 | ciscoDot11IfMIB | 3 | 212 | This MIB module provides network management support for Cisco IEEE 802.11 Wireless LAN type device (Access Point) radio interface… |
| 1.3.6.1.4.1.9.9.273 | ciscoDot11AssociationMIB | 2 | 91 | This MIB module provides network management information on IEEE 802.11 wireless device association management and data packet for… |
| 1.3.6.1.4.1.9.9.275 | ciscoBcpMIB | 2 | 25 | This MIB module describes the Managed Objects for of Bridge Control Protocol (RFC2878). This MIB is influenced by RFC1474. |
| 1.3.6.1.4.1.9.9.276 | ciscoIfExtensionMIB | 3 | 143 | A MIB module for extending the IF-MIB (RFC2863) to add objects which provide additional information about interfaces not availabl… |
| 1.3.6.1.4.1.9.9.277 | ciscoDdpIappMIB | 3 | 22 | This MIB module describes the management support for the Inter-Access Point Protocol (IAPP). IAPP is a Cisco propriety Data Deli… |
| 1.3.6.1.4.1.9.9.278 | ciscoIpProtocolMIB | 3 | 63 | The MIB module is for management of information to support packet filtering on IP protocols. The cippfIpProfileTable allows users… |
| 1.3.6.1.4.1.9.9.279 | ciscoAtmQosMIB | 3 | 67 | The MIB is created to provide ATM QoS information in these areas: 1. Traffic shaping on a per-VC basis 2. Traffic shaping on a pe… |
| 1.3.6.1.4.1.9.9.280 | ciscoOutageMIB | 3 | 75 | This MIB module describes, stores, and reports outage related information generated by individual hardware and software component… |
| 1.3.6.1.4.1.9.9.281 | ciscoFabricC12kMIB | 3 | 135 | Cisco Fabric MIB module for c12000 series of routers. This MIB module is used for managing/tracking the c12000 fabric entities an… |
| 1.3.6.1.4.1.9.9.282 | ciscoVsanMIB | 2 | 104 | The MIB module for the management of the Virtual Storage Networks (VSANs) within the frame work of Cisco's VSAN Architecture. T… |
| 1.3.6.1.4.1.9.9.284 | ciscoFcRouteMIB | 2 | 55 | The MIB module for configuring and displaying FC (Fibre Channel) Route Information. |
| 1.3.6.1.4.1.9.9.285 | ciscoPortChannelMIB | 2 | 40 | The MIB module for management of Port Channel ports. In addition to this MIB, CISCO-FC-FE-MIB and interface mib (rfc2863) will al… |
| 1.3.6.1.4.1.9.9.286 | ciscoWwnmgrMIB | 2 | 38 | The World Wide Name (WWN) in the fibre channel networking technology is equivalent to the MAC address in Ethernet. There are six … |
| 1.3.6.1.4.1.9.9.287 | ciscoFspfMIB | 4 | 95 | Fabric Shortest Path First (FSPF) MIB. |
| 1.3.6.1.4.1.9.9.288 | ciscoRadiusMIB | 3 | 91 | MIB module for monitoring and configuring authentication and logging services using RADIUS (Remote Authentication Dial In User Se… |
| 1.3.6.1.4.1.9.9.289 | ciscoFcFeMIB | 2 | 315 | This is the Cisco fibre element management MIB module. It covers: - Cisco extension to the interface MIB ( IF-MIB ) - Contains all… |
| 1.3.6.1.4.1.9.9.290 | ciscoVirtualNwIfMIB | 2 | 22 | The MIB module for management of virtual network interfaces to VSAN and VLAN. |
| 1.3.6.1.4.1.9.9.292 | ciscoRscnMIB | 2 | 67 | The MIB module for the management of the Fibre Channel's Registered State Change Notification (RSCN) functionality, which is spec… |
| 1.3.6.1.4.1.9.9.293 | ciscoNsMIB | 2 | 67 | The MIB module for the management of the Cisco Name Server which realizes the FC-GS3 requirements for Name Server (NS). |
| 1.3.6.1.4.1.9.9.294 | ciscoZsMIB | 2 | 254 | The MIB module for the management of zoning within the framework of Cisco's Zoning Server (ZS) Archi- tecture which realizes the … |
| 1.3.6.1.4.1.9.9.295 | ciscoFcPingMIB | 2 | 37 | The MIB module for the management of the Fibre Channel Ping functionality. |
| ... | ||||