A MIB to configure the Port-Track feature.
When a link goes down, all the services which depend
on the link are notified of the outage. The loss of
this link may be an indirect failure to the end devices
attached to the switch. The concept behind the Port-Track
feature is to create a direct failure on the ports
connected to end devices on event of such indirect
failures.
One more ports can be 'tracked' in terms of their
operational status. The cptPortTrackTable lets the user
associate which port(s) need to be tracked to the ports
that will be tracking them.
cptPortForceShutTable, lets the user configure the
forced-shut mode of the linked-port.
Parsed from file CISCO-PORT-TRACK-MIB.mib
Module: CISCO-PORT-TRACK-MIB
A MIB to configure the Port-Track feature.
When a link goes down, all the services which depend
on the link are notified of the outage. The loss of
this link may be an indirect failure to the end devices
attached to the switch. The concept behind the Port-Track
feature is to create a direct failure on the ports
connected to end devices on event of such indirect
failures.
One more ports can be 'tracked' in terms of their
operational status. The cptPortTrackTable lets the user
associate which port(s) need to be tracked to the ports
that will be tracking them.
cptPortForceShutTable, lets the user configure the
forced-shut mode of the linked-port.
Parsed from file CISCO-PORT-TRACK-MIB.my.txt
Company: None
Module: CISCO-PORT-TRACK-MIB
A MIB to configure the Port-Track feature.
When a link goes down, all the services which depend
on the link are notified of the outage. The loss of
this link may be an indirect failure to the end devices
attached to the switch. The concept behind the Port-Track
feature is to create a direct failure on the ports
connected to end devices on event of such indirect
failures.
One more ports can be 'tracked' in terms of their
operational status. The cptPortTrackTable lets the user
associate which port(s) need to be tracked to the ports
that will be tracking them.
cptPortForceShutTable, lets the user configure the
forced-shut mode of the linked-port.
ciscoPortTrackMIB MODULE-IDENTITY LAST-UPDATED "200504270000Z" ORGANIZATION "Cisco Systems Inc. " CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553 -NETS E-mail: [email protected]" DESCRIPTION "A MIB to configure the Port-Track feature. When a link goes down, all the services which depend on the link are notified of the outage. The loss of this link may be an indirect failure to the end devices attached to the switch. The concept behind the Port-Track feature is to create a direct failure on the ports connected to end devices on event of such indirect failures. One more ports can be 'tracked' in terms of their operational status. The cptPortTrackTable lets the user associate which port(s) need to be tracked to the ports that will be tracking them. cptPortForceShutTable, lets the user configure the forced-shut mode of the linked-port." REVISION "200504270000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 437 }
ciscoPortTrackMIB OBJECT IDENTIFIER ::= { ciscoMgmt 437 }
Vendor: Cisco
Module: CISCO-PORT-TRACK-MIB
[Automatically extracted from oidview.com]
ciscoPortTrackMIB MODULE-IDENTITY LAST-UPDATED "200504270000Z" ORGANIZATION "Cisco Systems Inc. " CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553 -NETS E-mail: [email protected]" DESCRIPTION "A MIB to configure the Port-Track feature. When a link goes down, all the services which depend on the link are notified of the outage. The loss of this link may be an indirect failure to the end devices attached to the switch. The concept behind the Port-Track feature is to create a direct failure on the ports connected to end devices on event of such indirect failures. One more ports can be 'tracked' in terms of their operational status. The cptPortTrackTable lets the user associate which port(s) need to be tracked to the ports that will be tracking them. cptPortForceShutTable, lets the user configure the forced-shut mode of the linked-port." REVISION "200504270000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 437 }
ciscoPortTrackMIB MODULE-IDENTITY LAST-UPDATED "200504270000Z" ORGANIZATION "Cisco Systems Inc. " CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553 -NETS E-mail: [email protected]" DESCRIPTION "A MIB to configure the Port-Track feature. When a link goes down, all the services which depend on the link are notified of the outage. The loss of this link may be an indirect failure to the end devices attached to the switch. The concept behind the Port-Track feature is to create a direct failure on the ports connected to end devices on event of such indirect failures. One more ports can be 'tracked' in terms of their operational status. The cptPortTrackTable lets the user associate which port(s) need to be tracked to the ports that will be tracking them. cptPortForceShutTable, lets the user configure the forced-shut mode of the linked-port." REVISION "200504270000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 437 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.437.1 | ciscoPortTrackObjects | 1 | 11 | None |
| 1.3.6.1.4.1.9.9.437.2 | cptMIBConformance | 2 | 5 | None |
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.9.9.387 | ciscoNetflowMIB | 3 | 206 | The Netflow MIB provides a simple and easy method to get NetFlow cache information, current NetFlow configuration and statistics.… |
| 1.3.6.1.4.1.9.9.388 | ciscoVirtualSwitchMIB | 3 | 128 | This MIB module defines the managed objects that support the virtual switch architecture. The virtual switch concept combines sev… |
| 1.3.6.1.4.1.9.9.389 | ciscoVoiceCasModuleMIB | 3 | 22 | This MIB is used to support Programmable CAS signaling Bit configuration on modules that support voice traffic. This MIB will enab… |
| 1.3.6.1.4.1.9.9.390 | ciscoCableDiagMIB | 3 | 33 | This MIB module defines objects for managing cable diagnostic test capabilites supported by the Cisco devices. Cable diagnostic t… |
| 1.3.6.1.4.1.9.9.391 | ciscoFcspMIB | 3 | 46 | MIB module for managing Fibre Channel Security for the fibre channel devices. This MIB is used to configure and monitor the Fibre-… |
| 1.3.6.1.4.1.9.9.392 | ciscoRemoteAccessMonitorMIB | 3 | 199 | Acronyms and Definitions The following acronyms and terms are used in this document: IPSec: Secure IP Protocol VPN: Virtual Priv… |
| 1.3.6.1.4.1.9.9.393 | ciscoVoiceConnectivityMIB | 3 | 44 | This MIB module provides connectivity related information for devices (e.g., 'connectivity between voice gateway, phones, gatekee… |
| 1.3.6.1.4.1.9.9.394 | ciscoIpTapMIB | 3 | 28 | This module manages Cisco's intercept feature for IP. This MIB is used along with CISCO-TAP2-MIB to intercept IP traffic. CISCO-T… |
| 1.3.6.1.4.1.9.9.395 | cisco802TapMIB | 3 | 20 | This module manages Cisco's intercept feature for 802 (layer 2) streams. This MIB is used along with CISCO-TAP2-MIB to intercept 8… |
| 1.3.6.1.4.1.9.9.396 | ciscoMlrMIB | 3 | 190 | The MIB for providing information about Multi-layer Routing(MLR). This MIB will provide information used to control and measure S… |
| 1.3.6.1.4.1.9.9.397 | ciscoH225MIB | 1 | 176 | Cisco H225 MIB module. This module consists of H225 call signaling and H225 RAS (Registration, Admission and Status). These are p… |
| 1.3.6.1.4.1.9.9.398 | ciscoMauExtMIB | 3 | 23 | A MIB module for extending the MAU-MIB (RFC 3636) to add objects which provide additional management information about MAU or Jac… |
| 1.3.6.1.4.1.9.9.399 | ciscoTap2MIB | 3 | 69 | This module manages Cisco's intercept feature. This MIB replaces CISCO-TAP-MIB. This MIB defines a generic stream table that cont… |
| 1.3.6.1.4.1.9.9.400 | ciscoUserConnectionTapMIB | 2 | 13 | This module manages Cisco's intercept feature for user connections. This MIB is used along with CISCO-TAP2-MIB to intercept user t… |
| 1.3.6.1.4.1.9.9.401 | ciscoBridgeExtMIB | 3 | 34 | A MIB module for extending BRIDGE-MIB specified in RFC 1493. |
| 1.3.6.1.4.1.9.9.402 | ciscoPowerEthernetExtMIB | 3 | 79 | A MIB module for extending the POWER-ETHERNET-MIB (RFC3621) to add objects which provide additional management information about … |
| 1.3.6.1.4.1.9.9.405 | ciscoDnsServerMIB | 3 | 400 | The MIB module for entities implementing the server side of the Domain Name System (DNS) protocol. P. Mockapetris, 'Domain names … |
| 1.3.6.1.4.1.9.9.407 | ciscoAtmTrunkStatMIB | 3 | 101 | The MIB module contains ATM Trunk statistics. TERMINOLOGY PVC: Permanent Virtual Circuit OAM: Operation and Management CRC: Cyclic… |
| 1.3.6.1.4.1.9.9.408 | ciscoSnmpNotificationExtMIB | 3 | 13 | This MIB extends the functionality provided by SNMP-NOTIFICATION-MIB. This MIB provides for the aging of the notification filters … |
| 1.3.6.1.4.1.9.9.409 | ciscoSnmpVacmExtMIB | 2 | 11 | The management information definitions to extend the View-based Access Control Model (RFC3415) for SNMP. This MIB extends the 'SN… |
| 1.3.6.1.4.1.9.9.411 | ciscoVlanTranslationMIB | 3 | 27 | The MIB module for the management of VLAN translations. VLAN translation refers to the ability of the device to translate between… |
| 1.3.6.1.4.1.9.9.412 | ciscoSnmpTargetExtMIB | 2 | 30 | This MIB is an extension of the SNMP-TARGET-MIB specified in RFC3413. This MIB module contains Cisco-defined extension to the sn… |
| 1.3.6.1.4.1.9.9.413 | ciscoDot11SsidSecMIB | 2 | 71 | This MIB module provides network management support for Cisco IEEE 802.11 Wireless LAN devices association and authentication. ACR… |
| 1.3.6.1.4.1.9.9.414 | ciscoPoePdMIB | 3 | 17 | This MIB is intended for devices powered by external power sources, in particular Power Over Ethernet (PoE or formerly called inl… |
| 1.3.6.1.4.1.9.9.415 | ciscoWlanManMIB | 3 | 13 | This MIB module provides network management and configuration support for IEEE 802.11 Wireless LAN devices. ACRONYMS HTTP Hypertext … |
| 1.3.6.1.4.1.9.9.416 | ciscoDot11QosMIB | 3 | 49 | This MIB module provides network management support for QoS on wireless LAN devices. The objects defined in this MIB provide equ… |
| 1.3.6.1.4.1.9.9.420 | ciscoUnityExpressMIB | 3 | 179 | The MIB Module for the management of the Cisco Unity Express (CUE) service. CUE is a voicemail service that runs in a Cisco rout… |
| 1.3.6.1.4.1.9.9.421 | ciscoDpvmMIB | 3 | 55 | The MIB module for the management of the Dynamic Port Vsan Membership (DPVM) module. DPVM provides the ability to assign (virtual… |
| 1.3.6.1.4.1.9.9.422 | ciscoIPsecTc | 0 | 0 | This MIB module defines the textual conventions used in the IPsec suite of MIBs. This includes Internet DOI numbers defined in RF… |
| 1.3.6.1.4.1.9.9.423 | ciscoIkeConfigMIB | 3 | 93 | This is a MIB Module for configuring and viewing IKE parameters and policies. Acronyms The following acronyms are used in this do… |
| 1.3.6.1.4.1.9.9.424 | ciscoCableMeteringMIB | 3 | 53 | This is the MIB module for Usage Based Metering for the DOCSIS-compliant Cable Modem Termination Systems (CMTS). Usage Based Mete… |
| 1.3.6.1.4.1.9.9.426 | ciscoLinkErrorMonitorMIB | 3 | 34 | The MIB module for managing Link Error Monitoring Feature on devices. Link Error Monitoring Feature provides a mechanism to monito… |
| 1.3.6.1.4.1.9.9.427 | ciscoZsExtMIB | 3 | 33 | The MIB module for the management of zoning within the framework of Cisco's Zoning Server (ZS) Archi- tecture which realizes the … |
| 1.3.6.1.4.1.9.9.428 | ciscoIkeFlowExtMIB | 3 | 18 | This MIB module is an extension to CISCO-IKE-FLOW-MIB and contains Cisco Specific extensions for monitoring IKE. It is for monito… |
| 1.3.6.1.4.1.9.9.429 | ciscoIkeFlowMIB | 3 | 80 | This is a MIB module for monitoring the structures and status of IPsec control flows based on Internet Key Exchange protocol. The… |
| 1.3.6.1.4.1.9.9.430 | ciscoFcDeviceAliasMIB | 3 | 14 | The MIB module for the management of Device Aliases in a Fibre Channel Fabric. A Fibre Channel fabric consists of devices such as… |
| 1.3.6.1.4.1.9.9.431 | ciscoIPsecProvisioningMIB | 3 | 98 | IPSec is the next-generation network layer crypto framework described in RFC2401-2411. This MIB defines the IPsec configurations.… |
| 1.3.6.1.4.1.9.9.432 | ciscoEnhancedIpsecFlowMIB | 3 | 330 | This is a MIB Module for monitoring the structures and status of IPSec-based networks. The MIB has been designed to be adopted as… |
| 1.3.6.1.4.1.9.9.433 | ciscoCFSMIB | 3 | 102 | This MIB applies to one or more of a set of devices which have connectivity through some kind of 'fabric'. Many features which ru… |
| 1.3.6.1.4.1.9.9.434 | ciscoIpNetworkDiscoveryMIB, ciscoIsnsIpNetDiscoveryMIB | 3 | 58 | MIB to provide the information about the disjoint IP networks connected to the various gigabit ethernet interfaces in the 'Fabric… |
| 1.3.6.1.4.1.9.9.435 | ciscoFcMulticastMIB | 3 | 14 | MIB module for monitoring and configuring Fibre Channel Multicast feature. |
| 1.3.6.1.4.1.9.9.436 | ciscoDNSClientMIB | 3 | 28 | The MIB module for entities implementing the client side of the Domain Name System (DNS) protocol. |
| 1.3.6.1.4.1.9.9.438 | ciscoIPsecSignalingMIB | 3 | 140 | This MIB Module models status, performance and failures of a protocol with the generic characteristics of signalling protocols us… |
| 1.3.6.1.4.1.9.9.439 | ciscoCcmeMIB | 3 | 338 | This MIB allows management of Cisco CallManager Express (CCME) feature in Cisco IOS. CCME is optional software feature that enabl… |
| 1.3.6.1.4.1.9.9.441 | ciscoSrstMIB | 3 | 149 | This MIB allows management of Cisco Survivable Remote Site Telephony (SRST) feature in Cisco IOS. SRST is an optional software fe… |
| 1.3.6.1.4.1.9.9.443 | ciscoCommonMgmtMIB | 3 | 37 | MIB module for integrating different elements of managing a device. For example, different device access methods like SNMP, CLI, … |
| 1.3.6.1.4.1.9.9.445 | ciscoQinqVlanMIB | 3 | 25 | This MIB defines configuration and monitoring capabilities relating to 802.1QinQ interfaces. QinQ interfaces are capable of term… |
| 1.3.6.1.4.1.9.9.447 | ciscoScsiFlowMIB | 3 | 99 | A SCSI Flow is described as a SCSI Initiator SCSI Target combination. This MIB is used to configure and monitor SCSI Flows. Gloss… |
| 1.3.6.1.4.1.9.9.448 | ciscoSsmProvMIB | 2 | 26 | This MIB is used to provision features on a Data Path Processor (DPP) of a Storage Service Module (SSM). A DPP is assigned to a c… |
| 1.3.6.1.4.1.9.9.449 | ciscoEigrpMIB | 3 | 103 | Enhanced Interior Gateway Protocol (EIGRP) is a Cisco proprietary distance vector routing protocol. It is based on the Diffusin… |
| 1.3.6.1.4.1.9.9.450 | ciscoCableAdmCtrlMIB | 3 | 123 | This MIB module defines the managed objects enabling the management of Cable Modem Termination System (CMTS) admission control. CM… |
| 1.3.6.1.4.1.9.9.451 | ciscoIpUrpfMIB | 3 | 47 | Unicast Reverse Path Forwarding (URPF) is a function that checks the validity of the source address of IP packets received on an … |
| 1.3.6.1.4.1.9.9.454 | ciscoDot11LbsMIB | 3 | 23 | This MIB module supports network management for Location Based Services on IEEE 802.11 wireless LAN devices. Location Based Serv… |
| 1.3.6.1.4.1.9.9.455 | ciscoImageTc | 0 | 0 | This MIB module defines the textual conventions used in the enhanced image MIB. Glossary: Base Image Essential part of the operatin… |
| 1.3.6.1.4.1.9.9.456 | ciscoDot11WidsMIB | 3 | 50 | This MIB is intended to be implemented on the following IOS based network entities for the purpose of providing network managemen… |
| 1.3.6.1.4.1.9.9.457 | ciscoWdsIdsMIB | 2 | 18 | This MIB is intended to be implemented on all IOS based network entities that provide Wireless Domain Services, for the purpose o… |
| 1.3.6.1.4.1.9.9.458 | ciscoApplianceRedundancyMIB | 3 | 47 | This mib defines the SNMP objects to report the status of High Availability (HA) functionality in Cisco network management applia… |
| 1.3.6.1.4.1.9.9.459 | ciscoBitsClockMIB | 3 | 21 | This MIB provides information on Building Integrated Timing Supply(BITS) clocking sources and modes of operations. It is used to… |
| 1.3.6.1.4.1.9.9.460 | ciscoTpcMIB | 3 | 24 | The MIB module for Third Party Copy(TPC): Third Party Copy derives its name from the fact that there are three entities involved … |
| 1.3.6.1.4.1.9.9.461 | ciscoEtherCfmMIB | 3 | 39 | This MIB module defines the managed objects and notifications for Ethernet Connectivity Fault Management (CFM). CFM is an end-to-e… |
| 1.3.6.1.4.1.9.9.463 | ciscoSanTapMIB | 3 | 30 | MIB module to provide information about the SanTap service configuration. SanTap is a fibre channel switch based capability that p… |
| 1.3.6.1.4.1.9.9.466 | ciscoEthernetAccessMIB | 2 | 20 | The tables defined by this MIB module contain a collection of managed objects that are general in nature and apply to an edge dev… |
| 1.3.6.1.4.1.9.9.467 | ciscoCryptoAcceleratorMIB | 3 | 107 | The MIB module for monitoring the identity, status, activity and faults of crypto accelerator (CA) modules used in devices implem… |
| 1.3.6.1.4.1.9.9.468 | ciscoContextMappingMIB | 2 | 35 | A single SNMP agent sometimes needs to support multiple instances of the same MIB module, and does so through the use of multiple… |
| 1.3.6.1.4.1.9.9.470 | ciscoEnhancedSlbMIB | 3 | 106 | The MIB for managing Server Load Balancing Manager(s), and products supporting Server Load Balancing(SLB) features. This MIB exten… |
| 1.3.6.1.4.1.9.9.471 | ciscoFlexLinksMIB | 3 | 36 | This MIB module is for configuration and status query of Flex Links feature on the Cisco device. Flex Links are a pair of Layer 2… |
| 1.3.6.1.4.1.9.9.472 | ciscoModuleVirtualizationMIB | 3 | 35 | This MIB provides a way to create virtual contexts, and managing them. A virtual context is logical partition of a physical devi… |
| 1.3.6.1.4.1.9.9.473 | ciscoCcaMIB | 3 | 200 | The Cisco Contact Center Applications (CCCA) Management Information Base (MIB) module defines management instrumentation for appl… |
| 1.3.6.1.4.1.9.9.474 | ciscoFilterGroupMIB | 3 | 55 | The MIB module is for creating and configuring object groups to support packet filtering and access control on IP and other proto… |
| 1.3.6.1.4.1.9.9.479 | ciscoCableWidebandMIB | 3 | 77 | This is the MIB module for the support of Channel Bonding Protocol for the Cable Modem Termination System (CMTS). Wideband DOCSIS… |
| 1.3.6.1.4.1.9.9.480 | ciscoL4L7moduleResourceLimitMIB | 4 | 100 | The MIB module for managing resource classes and configuring limits(max/min) to different resources. The resource referenced in … |
| 1.3.6.1.4.1.9.9.482 | ciscoInterfaceTopNExtMIB | 3 | 16 | This MIB module is an extension to INTERFACETOPN-MIB. It provides additional management information for sorting device interfaces. |
| 1.3.6.1.4.1.9.9.483 | ciscoIpRanBackHaulMIB | 3 | 248 | This MIB provides information on the IP-RAN traffic from cell site to aggregation site in the following situations. In an GSM en… |
| 1.3.6.1.4.1.9.9.484 | ciscoNacNadMIB | 3 | 157 | This MIB module is for the configuration of a Network Access Device (NAD) on the Cisco Network Admission Control (NAC) system. End… |
| 1.3.6.1.4.1.9.9.485 | ciscoRttMonTCMIB | 0 | 0 | This MIB contains textual conventions used by CISCO-RTTMON-MIB, CISCO-RTTMON-RTP-MIB and CISCO-RTTMON-ICMP-MIB, but they are not … |
| 1.3.6.1.4.1.9.9.486 | ciscoRttMonIcmpMIB | 3 | 7 | An extension to the CISCO-RTTMON-MIB for ICMP operations. The ICMP Jitter operation provides capability to measure metrics such a… |
| 1.3.6.1.4.1.9.9.487 | ciscoRttMonRtpMIB | 3 | 8 | An extension to the CISCO-RTTMON-MIB for Cisco IP SLA RTP operation, Real-Time Transport Protocol(RFC 1889). This operation provi… |
| ... | ||||