The MIB module for the management of zoning within
the framework of Cisco's Zoning Server (ZS) Archi-
tecture which realizes the FC-GS4/SW3 requirements
for Zone Server. This MIB is an extension to the
CISCO-ZS-MIB, which is for managing zoning
conforming to FC-GS3/SW2. The FC-GS4 specification
is Fibre-Channel - Generic Services - 4 T11/
Project 1505-D/Rev 7.8. The SW3 specification is
Fibre-Channel - Switch Fabric - 3 T11/Project 1508-
D/Rev 6.6.
GS4/SW3 allows zoning to operate in either basic
or enhanced mode of operation. Basic mode is
essentially GS3/SW2 compatible mode (as modelled
by CISCO-ZS-MIB). Enhanced mode of operation
provides additional capabilities. In enhanced mode
of operation, all the configuration should be
done within the scope of a session.
The current 'Running Configuration' on the local device
for zone server is called the 'effective' database.
When the first configuration command on the zone server
data is received, a snapshot of the current 'effective
database' is taken on the local device. This
snapshot is called the 'copy' database. An implicit
session is started by the Zone Server on the local
device and all subsequent SET operations take place
in the context of this session. The 'copy' database
is used for all further modifications in the
session. There can be only one session active in the
entire Fibre Channel fabric. The user who initiates
the creation of this 'copy', is called the owner of
session. When a session has been created on a device
in the Fibre Channel fabric, if an attempt is made
to start a session from any other device in the
fabric, it results in error.
Once the modifications to the 'copy' are done, a
'commit' operation can be done. The 'commit' done
on the local device, results in the local 'effective
database' being overwritten with the 'copy' and
then the new local 'effective database' is
distributed to all other devices in the Fibre Channel
fabric. The successful 'commit' operation also results
in destroying the 'copy' on the local device. The
'commit' can only be performed by the owner of the
session.
The 'copy' can optionally be destroyed without any
distribution. This can be done by performing a
'clear' operation.
Glossary of terms used in this MIB
VSAN - Virtual Storage Area Network.
Parsed from file CISCO-ZS-EXT-MIB.mib
Module: CISCO-ZS-EXT-MIB
The MIB module for the management of zoning within
the framework of Cisco's Zoning Server (ZS) Archi-
tecture which realizes the FC-GS4/SW3 requirements
for Zone Server. This MIB is an extension to the
CISCO-ZS-MIB, which is for managing zoning
conforming to FC-GS3/SW2. The FC-GS4 specification
is Fibre-Channel - Generic Services - 4 T11/
Project 1505-D/Rev 7.8. The SW3 specification is
Fibre-Channel - Switch Fabric - 3 T11/Project 1508-
D/Rev 6.6.
GS4/SW3 allows zoning to operate in either basic
or enhanced mode of operation. Basic mode is
essentially GS3/SW2 compatible mode (as modelled
by CISCO-ZS-MIB). Enhanced mode of operation
provides additional capabilities. In enhanced mode
of operation, all the configuration should be
done within the scope of a session.
The current 'Running Configuration' on the local device
for zone server is called the 'effective' database.
When the first configuration command on the zone server
data is received, a snapshot of the current 'effective
database' is taken on the local device. This
snapshot is called the 'copy' database. An implicit
session is started by the Zone Server on the local
device and all subsequent SET operations take place
in the context of this session. The 'copy' database
is used for all further modifications in the
session. There can be only one session active in the
entire Fibre Channel fabric. The user who initiates
the creation of this 'copy', is called the owner of
session. When a session has been created on a device
in the Fibre Channel fabric, if an attempt is made
to start a session from any other device in the
fabric, it results in error.
Once the modifications to the 'copy' are done, a
'commit' operation can be done. The 'commit' done
on the local device, results in the local 'effective
database' being overwritten with the 'copy' and
then the new local 'effective database' is
distributed to all other devices in the Fibre Channel
fabric. The successful 'commit' operation also results
in destroying the 'copy' on the local device. The
'commit' can only be performed by the owner of the
session.
The 'copy' can optionally be destroyed without any
distribution. This can be done by performing a
'clear' operation.
Glossary of terms used in this MIB
VSAN - Virtual Storage Area Network.
Parsed from file CISCO-ZS-EXT-MIB.my.txt
Company: None
Module: CISCO-ZS-EXT-MIB
The MIB module for the management of zoning within
the framework of Cisco's Zoning Server (ZS) Archi-
tecture which realizes the FC-GS4/SW3 requirements
for Zone Server. This MIB is an extension to the
CISCO-ZS-MIB, which is for managing zoning
conforming to FC-GS3/SW2. The FC-GS4 specification
is Fibre-Channel - Generic Services - 4 T11/
Project 1505-D/Rev 7.8. The SW3 specification is
Fibre-Channel - Switch Fabric - 3 T11/Project 1508-
D/Rev 6.6.
GS4/SW3 allows zoning to operate in either basic
or enhanced mode of operation. Basic mode is
essentially GS3/SW2 compatible mode (as modelled
by CISCO-ZS-MIB). Enhanced mode of operation
provides additional capabilities. In enhanced mode
of operation, all the configuration should be
done within the scope of a session.
The current 'Running Configuration' on the local device
for zone server is called the 'effective' database.
When the first configuration command on the zone server
data is received, a snapshot of the current 'effective
database' is taken on the local device. This
snapshot is called the 'copy' database. An implicit
session is started by the Zone Server on the local
device and all subsequent SET operations take place
in the context of this session. The 'copy' database
is used for all further modifications in the
session. There can be only one session active in the
entire Fibre Channel fabric. The user who initiates
the creation of this 'copy', is called the owner of
session. When a session has been created on a device
in the Fibre Channel fabric, if an attempt is made
to start a session from any other device in the
fabric, it results in error.
Once the modifications to the 'copy' are done, a
'commit' operation can be done. The 'commit' done
on the local device, results in the local 'effective
database' being overwritten with the 'copy' and
then the new local 'effective database' is
distributed to all other devices in the Fibre Channel
fabric. The successful 'commit' operation also results
in destroying the 'copy' on the local device. The
'commit' can only be performed by the owner of the
session.
The 'copy' can optionally be destroyed without any
distribution. This can be done by performing a
'clear' operation.
Glossary of terms used in this MIB
VSAN - Virtual Storage Area Network.
ciscoZsExtMIB MODULE-IDENTITY LAST-UPDATED "200601030000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553 -NETS E-mail: [email protected]" DESCRIPTION "The MIB module for the management of zoning within the framework of Cisco's Zoning Server (ZS) Archi- tecture which realizes the FC-GS4/SW3 requirements for Zone Server. This MIB is an extension to the CISCO-ZS-MIB, which is for managing zoning conforming to FC-GS3/SW2. The FC-GS4 specification is Fibre-Channel - Generic Services - 4 T11/ Project 1505-D/Rev 7.8. The SW3 specification is Fibre-Channel - Switch Fabric - 3 T11/Project 1508- D/Rev 6.6. GS4/SW3 allows zoning to operate in either basic or enhanced mode of operation. Basic mode is essentially GS3/SW2 compatible mode (as modelled by CISCO-ZS-MIB). Enhanced mode of operation provides additional capabilities. In enhanced mode of operation, all the configuration should be done within the scope of a session. The current 'Running Configuration' on the local device for zone server is called the 'effective' database. When the first configuration command on the zone server data is received, a snapshot of the current 'effective database' is taken on the local device. This snapshot is called the 'copy' database. An implicit session is started by the Zone Server on the local device and all subsequent SET operations take place in the context of this session. The 'copy' database is used for all further modifications in the session. There can be only one session active in the entire Fibre Channel fabric. The user who initiates the creation of this 'copy', is called the owner of session. When a session has been created on a device in the Fibre Channel fabric, if an attempt is made to start a session from any other device in the fabric, it results in error. Once the modifications to the 'copy' are done, a 'commit' operation can be done. The 'commit' done on the local device, results in the local 'effective database' being overwritten with the 'copy' and then the new local 'effective database' is distributed to all other devices in the Fibre Channel fabric. The successful 'commit' operation also results in destroying the 'copy' on the local device. The 'commit' can only be performed by the owner of the session. The 'copy' can optionally be destroyed without any distribution. This can be done by performing a 'clear' operation. Glossary of terms used in this MIB VSAN - Virtual Storage Area Network." REVISION "200601030000Z" DESCRIPTION "Added objects czseGlobalDefaultZoneBehaviour and czseGlobalPropagationMode." REVISION "200408110000Z" DESCRIPTION "Initial version of this MIB." ::= { ciscoMgmt 427 }
ciscoZsExtMIB OBJECT IDENTIFIER ::= { ciscoMgmt 427 }
Vendor: Cisco
Module: CISCO-ZS-EXT-MIB
[Automatically extracted from oidview.com]
ciscoZsExtMIB MODULE-IDENTITY LAST-UPDATED "200601030000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553 -NETS E-mail: [email protected]" DESCRIPTION "The MIB module for the management of zoning within the framework of Cisco's Zoning Server (ZS) Archi- tecture which realizes the FC-GS4/SW3 requirements for Zone Server. This MIB is an extension to the CISCO-ZS-MIB, which is for managing zoning conforming to FC-GS3/SW2. The FC-GS4 specification is Fibre-Channel - Generic Services - 4 T11/ Project 1505-D/Rev 7.8. The SW3 specification is Fibre-Channel - Switch Fabric - 3 T11/Project 1508- D/Rev 6.6. GS4/SW3 allows zoning to operate in either basic or enhanced mode of operation. Basic mode is essentially GS3/SW2 compatible mode (as modelled by CISCO-ZS-MIB). Enhanced mode of operation provides additional capabilities. In enhanced mode of operation, all the configuration should be done within the scope of a session. The current 'Running Configuration' on the local device for zone server is called the 'effective' database. When the first configuration command on the zone server data is received, a snapshot of the current 'effective database' is taken on the local device. This snapshot is called the 'copy' database. An implicit session is started by the Zone Server on the local device and all subsequent SET operations take place in the context of this session. The 'copy' database is used for all further modifications in the session. There can be only one session active in the entire Fibre Channel fabric. The user who initiates the creation of this 'copy', is called the owner of session. When a session has been created on a device in the Fibre Channel fabric, if an attempt is made to start a session from any other device in the fabric, it results in error. Once the modifications to the 'copy' are done, a 'commit' operation can be done. The 'commit' done on the local device, results in the local 'effective database' being overwritten with the 'copy' and then the new local 'effective database' is distributed to all other devices in the Fibre Channel fabric. The successful 'commit' operation also results in destroying the 'copy' on the local device. The 'commit' can only be performed by the owner of the session. The 'copy' can optionally be destroyed without any distribution. This can be done by performing a 'clear' operation. Glossary of terms used in this MIB VSAN - Virtual Storage Area Network." REVISION "200601030000Z" DESCRIPTION "Added objects czseGlobalDefaultZoneBehaviour and czseGlobalPropagationMode." REVISION "200408110000Z" DESCRIPTION "Initial version of this MIB." ::= { ciscoMgmt 427 }
ciscoZsExtMIB MODULE-IDENTITY LAST-UPDATED "200601030000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553 -NETS E-mail: [email protected]" DESCRIPTION "The MIB module for the management of zoning within the framework of Cisco's Zoning Server (ZS) Archi- tecture which realizes the FC-GS4/SW3 requirements for Zone Server. This MIB is an extension to the CISCO-ZS-MIB, which is for managing zoning conforming to FC-GS3/SW2. The FC-GS4 specification is Fibre-Channel - Generic Services - 4 T11/ Project 1505-D/Rev 7.8. The SW3 specification is Fibre-Channel - Switch Fabric - 3 T11/Project 1508- D/Rev 6.6. GS4/SW3 allows zoning to operate in either basic or enhanced mode of operation. Basic mode is essentially GS3/SW2 compatible mode (as modelled by CISCO-ZS-MIB). Enhanced mode of operation provides additional capabilities. In enhanced mode of operation, all the configuration should be done within the scope of a session. The current 'Running Configuration' on the local device for zone server is called the 'effective' database. When the first configuration command on the zone server data is received, a snapshot of the current 'effective database' is taken on the local device. This snapshot is called the 'copy' database. An implicit session is started by the Zone Server on the local device and all subsequent SET operations take place in the context of this session. The 'copy' database is used for all further modifications in the session. There can be only one session active in the entire Fibre Channel fabric. The user who initiates the creation of this 'copy', is called the owner of session. When a session has been created on a device in the Fibre Channel fabric, if an attempt is made to start a session from any other device in the fabric, it results in error. Once the modifications to the 'copy' are done, a 'commit' operation can be done. The 'commit' done on the local device, results in the local 'effective database' being overwritten with the 'copy' and then the new local 'effective database' is distributed to all other devices in the Fibre Channel fabric. The successful 'commit' operation also results in destroying the 'copy' on the local device. The 'commit' can only be performed by the owner of the session. The 'copy' can optionally be destroyed without any distribution. This can be done by performing a 'clear' operation. Glossary of terms used in this MIB VSAN - Virtual Storage Area Network." REVISION "200601030000Z" DESCRIPTION "Added objects czseGlobalDefaultZoneBehaviour and czseGlobalPropagationMode." REVISION "200408110000Z" DESCRIPTION "Initial version of this MIB." ::= { ciscoMgmt 427 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.427.0 | ciscoZsExtMIBNotifs | 0 | 0 | None |
| 1.3.6.1.4.1.9.9.427.1 | ciscoZsExtMIBObjects | 2 | 24 | None |
| 1.3.6.1.4.1.9.9.427.2 | ciscoZsExtMIBConform | 2 | 6 | None |
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.9.9.377 | ciscoFeatureCtrlMIB | 3 | 53 | There are two types of features in the system: - Regular features - Optional features The Regular features may or may not need to … |
| 1.3.6.1.4.1.9.9.378 | ciscoSvcInterfaceMIB | 3 | 115 | MIB module for displaying and configuring SVC (SAN Volume Controller) related features in the Storage Area Network (SAN) switches… |
| 1.3.6.1.4.1.9.9.379 | ciscoItpmMIB | 3 | 47 | The MIB for providing information related to monitoring SS7 links. This information can be used to manage the state of software u… |
| 1.3.6.1.4.1.9.9.380 | ciscoDhcpSnoopingMIB | 3 | 127 | The MIB module is for configuration of DHCP Snooping feature. DHCP Snooping is a security mechanism which uses information gleane… |
| 1.3.6.1.4.1.9.9.381 | ciscoDiffServExtMIB | 2 | 49 | This MIB is a Cisco extension to the DIFFSERV-MIB, RFC 3289. This MIB defines a Fibre Channel (FC) Multi Field filter to be used i… |
| 1.3.6.1.4.1.9.9.383 | ciscoCidsMIB | 3 | 183 | Cisco Intrusion Detection System MIB. Provides trap definitions for the evAlert and evError elements of the IDIOM (Intrusion Det… |
| 1.3.6.1.4.1.9.9.384 | ciscoDot11AntennaMIB | 2 | 11 | This MIB is intended to be implemented on 802.11 Access Points and Wireless Bridges to provide information about the antennas con… |
| 1.3.6.1.4.1.9.9.385 | ciscoUnityMIB | 3 | 101 | The MIB Module for the management of Cisco Unity server. Cisco Unity is a Unified Communications solution that provides advanced,… |
| 1.3.6.1.4.1.9.9.386 | ciscoModuleAutoShutdownMIB | 3 | 36 | The CISCO-MODULE-AUTO-SHUTDOWN-MIB is used to configure the module automatic shutdown feature. Modules will be reset by the syste… |
| 1.3.6.1.4.1.9.9.387 | ciscoNetflowMIB | 3 | 206 | The Netflow MIB provides a simple and easy method to get NetFlow cache information, current NetFlow configuration and statistics.… |
| 1.3.6.1.4.1.9.9.388 | ciscoVirtualSwitchMIB | 3 | 128 | This MIB module defines the managed objects that support the virtual switch architecture. The virtual switch concept combines sev… |
| 1.3.6.1.4.1.9.9.389 | ciscoVoiceCasModuleMIB | 3 | 22 | This MIB is used to support Programmable CAS signaling Bit configuration on modules that support voice traffic. This MIB will enab… |
| 1.3.6.1.4.1.9.9.390 | ciscoCableDiagMIB | 3 | 33 | This MIB module defines objects for managing cable diagnostic test capabilites supported by the Cisco devices. Cable diagnostic t… |
| 1.3.6.1.4.1.9.9.391 | ciscoFcspMIB | 3 | 46 | MIB module for managing Fibre Channel Security for the fibre channel devices. This MIB is used to configure and monitor the Fibre-… |
| 1.3.6.1.4.1.9.9.392 | ciscoRemoteAccessMonitorMIB | 3 | 199 | Acronyms and Definitions The following acronyms and terms are used in this document: IPSec: Secure IP Protocol VPN: Virtual Priv… |
| 1.3.6.1.4.1.9.9.393 | ciscoVoiceConnectivityMIB | 3 | 44 | This MIB module provides connectivity related information for devices (e.g., 'connectivity between voice gateway, phones, gatekee… |
| 1.3.6.1.4.1.9.9.394 | ciscoIpTapMIB | 3 | 28 | This module manages Cisco's intercept feature for IP. This MIB is used along with CISCO-TAP2-MIB to intercept IP traffic. CISCO-T… |
| 1.3.6.1.4.1.9.9.395 | cisco802TapMIB | 3 | 20 | This module manages Cisco's intercept feature for 802 (layer 2) streams. This MIB is used along with CISCO-TAP2-MIB to intercept 8… |
| 1.3.6.1.4.1.9.9.396 | ciscoMlrMIB | 3 | 190 | The MIB for providing information about Multi-layer Routing(MLR). This MIB will provide information used to control and measure S… |
| 1.3.6.1.4.1.9.9.397 | ciscoH225MIB | 1 | 176 | Cisco H225 MIB module. This module consists of H225 call signaling and H225 RAS (Registration, Admission and Status). These are p… |
| 1.3.6.1.4.1.9.9.398 | ciscoMauExtMIB | 3 | 23 | A MIB module for extending the MAU-MIB (RFC 3636) to add objects which provide additional management information about MAU or Jac… |
| 1.3.6.1.4.1.9.9.399 | ciscoTap2MIB | 3 | 69 | This module manages Cisco's intercept feature. This MIB replaces CISCO-TAP-MIB. This MIB defines a generic stream table that cont… |
| 1.3.6.1.4.1.9.9.400 | ciscoUserConnectionTapMIB | 2 | 13 | This module manages Cisco's intercept feature for user connections. This MIB is used along with CISCO-TAP2-MIB to intercept user t… |
| 1.3.6.1.4.1.9.9.401 | ciscoBridgeExtMIB | 3 | 34 | A MIB module for extending BRIDGE-MIB specified in RFC 1493. |
| 1.3.6.1.4.1.9.9.402 | ciscoPowerEthernetExtMIB | 3 | 79 | A MIB module for extending the POWER-ETHERNET-MIB (RFC3621) to add objects which provide additional management information about … |
| 1.3.6.1.4.1.9.9.405 | ciscoDnsServerMIB | 3 | 400 | The MIB module for entities implementing the server side of the Domain Name System (DNS) protocol. P. Mockapetris, 'Domain names … |
| 1.3.6.1.4.1.9.9.407 | ciscoAtmTrunkStatMIB | 3 | 101 | The MIB module contains ATM Trunk statistics. TERMINOLOGY PVC: Permanent Virtual Circuit OAM: Operation and Management CRC: Cyclic… |
| 1.3.6.1.4.1.9.9.408 | ciscoSnmpNotificationExtMIB | 3 | 13 | This MIB extends the functionality provided by SNMP-NOTIFICATION-MIB. This MIB provides for the aging of the notification filters … |
| 1.3.6.1.4.1.9.9.409 | ciscoSnmpVacmExtMIB | 2 | 11 | The management information definitions to extend the View-based Access Control Model (RFC3415) for SNMP. This MIB extends the 'SN… |
| 1.3.6.1.4.1.9.9.411 | ciscoVlanTranslationMIB | 3 | 27 | The MIB module for the management of VLAN translations. VLAN translation refers to the ability of the device to translate between… |
| 1.3.6.1.4.1.9.9.412 | ciscoSnmpTargetExtMIB | 2 | 30 | This MIB is an extension of the SNMP-TARGET-MIB specified in RFC3413. This MIB module contains Cisco-defined extension to the sn… |
| 1.3.6.1.4.1.9.9.413 | ciscoDot11SsidSecMIB | 2 | 71 | This MIB module provides network management support for Cisco IEEE 802.11 Wireless LAN devices association and authentication. ACR… |
| 1.3.6.1.4.1.9.9.414 | ciscoPoePdMIB | 3 | 17 | This MIB is intended for devices powered by external power sources, in particular Power Over Ethernet (PoE or formerly called inl… |
| 1.3.6.1.4.1.9.9.415 | ciscoWlanManMIB | 3 | 13 | This MIB module provides network management and configuration support for IEEE 802.11 Wireless LAN devices. ACRONYMS HTTP Hypertext … |
| 1.3.6.1.4.1.9.9.416 | ciscoDot11QosMIB | 3 | 49 | This MIB module provides network management support for QoS on wireless LAN devices. The objects defined in this MIB provide equ… |
| 1.3.6.1.4.1.9.9.420 | ciscoUnityExpressMIB | 3 | 179 | The MIB Module for the management of the Cisco Unity Express (CUE) service. CUE is a voicemail service that runs in a Cisco rout… |
| 1.3.6.1.4.1.9.9.421 | ciscoDpvmMIB | 3 | 55 | The MIB module for the management of the Dynamic Port Vsan Membership (DPVM) module. DPVM provides the ability to assign (virtual… |
| 1.3.6.1.4.1.9.9.422 | ciscoIPsecTc | 0 | 0 | This MIB module defines the textual conventions used in the IPsec suite of MIBs. This includes Internet DOI numbers defined in RF… |
| 1.3.6.1.4.1.9.9.423 | ciscoIkeConfigMIB | 3 | 93 | This is a MIB Module for configuring and viewing IKE parameters and policies. Acronyms The following acronyms are used in this do… |
| 1.3.6.1.4.1.9.9.424 | ciscoCableMeteringMIB | 3 | 53 | This is the MIB module for Usage Based Metering for the DOCSIS-compliant Cable Modem Termination Systems (CMTS). Usage Based Mete… |
| 1.3.6.1.4.1.9.9.426 | ciscoLinkErrorMonitorMIB | 3 | 34 | The MIB module for managing Link Error Monitoring Feature on devices. Link Error Monitoring Feature provides a mechanism to monito… |
| 1.3.6.1.4.1.9.9.428 | ciscoIkeFlowExtMIB | 3 | 18 | This MIB module is an extension to CISCO-IKE-FLOW-MIB and contains Cisco Specific extensions for monitoring IKE. It is for monito… |
| 1.3.6.1.4.1.9.9.429 | ciscoIkeFlowMIB | 3 | 80 | This is a MIB module for monitoring the structures and status of IPsec control flows based on Internet Key Exchange protocol. The… |
| 1.3.6.1.4.1.9.9.430 | ciscoFcDeviceAliasMIB | 3 | 14 | The MIB module for the management of Device Aliases in a Fibre Channel Fabric. A Fibre Channel fabric consists of devices such as… |
| 1.3.6.1.4.1.9.9.431 | ciscoIPsecProvisioningMIB | 3 | 98 | IPSec is the next-generation network layer crypto framework described in RFC2401-2411. This MIB defines the IPsec configurations.… |
| 1.3.6.1.4.1.9.9.432 | ciscoEnhancedIpsecFlowMIB | 3 | 330 | This is a MIB Module for monitoring the structures and status of IPSec-based networks. The MIB has been designed to be adopted as… |
| 1.3.6.1.4.1.9.9.433 | ciscoCFSMIB | 3 | 102 | This MIB applies to one or more of a set of devices which have connectivity through some kind of 'fabric'. Many features which ru… |
| 1.3.6.1.4.1.9.9.434 | ciscoIpNetworkDiscoveryMIB, ciscoIsnsIpNetDiscoveryMIB | 3 | 58 | MIB to provide the information about the disjoint IP networks connected to the various gigabit ethernet interfaces in the 'Fabric… |
| 1.3.6.1.4.1.9.9.435 | ciscoFcMulticastMIB | 3 | 14 | MIB module for monitoring and configuring Fibre Channel Multicast feature. |
| 1.3.6.1.4.1.9.9.436 | ciscoDNSClientMIB | 3 | 28 | The MIB module for entities implementing the client side of the Domain Name System (DNS) protocol. |
| 1.3.6.1.4.1.9.9.437 | ciscoPortTrackMIB | 2 | 18 | A MIB to configure the Port-Track feature. When a link goes down, all the services which depend on the link are notified of the o… |
| 1.3.6.1.4.1.9.9.438 | ciscoIPsecSignalingMIB | 3 | 140 | This MIB Module models status, performance and failures of a protocol with the generic characteristics of signalling protocols us… |
| 1.3.6.1.4.1.9.9.439 | ciscoCcmeMIB | 3 | 338 | This MIB allows management of Cisco CallManager Express (CCME) feature in Cisco IOS. CCME is optional software feature that enabl… |
| 1.3.6.1.4.1.9.9.441 | ciscoSrstMIB | 3 | 149 | This MIB allows management of Cisco Survivable Remote Site Telephony (SRST) feature in Cisco IOS. SRST is an optional software fe… |
| 1.3.6.1.4.1.9.9.443 | ciscoCommonMgmtMIB | 3 | 37 | MIB module for integrating different elements of managing a device. For example, different device access methods like SNMP, CLI, … |
| 1.3.6.1.4.1.9.9.445 | ciscoQinqVlanMIB | 3 | 25 | This MIB defines configuration and monitoring capabilities relating to 802.1QinQ interfaces. QinQ interfaces are capable of term… |
| 1.3.6.1.4.1.9.9.447 | ciscoScsiFlowMIB | 3 | 99 | A SCSI Flow is described as a SCSI Initiator SCSI Target combination. This MIB is used to configure and monitor SCSI Flows. Gloss… |
| 1.3.6.1.4.1.9.9.448 | ciscoSsmProvMIB | 2 | 26 | This MIB is used to provision features on a Data Path Processor (DPP) of a Storage Service Module (SSM). A DPP is assigned to a c… |
| 1.3.6.1.4.1.9.9.449 | ciscoEigrpMIB | 3 | 103 | Enhanced Interior Gateway Protocol (EIGRP) is a Cisco proprietary distance vector routing protocol. It is based on the Diffusin… |
| 1.3.6.1.4.1.9.9.450 | ciscoCableAdmCtrlMIB | 3 | 123 | This MIB module defines the managed objects enabling the management of Cable Modem Termination System (CMTS) admission control. CM… |
| 1.3.6.1.4.1.9.9.451 | ciscoIpUrpfMIB | 3 | 47 | Unicast Reverse Path Forwarding (URPF) is a function that checks the validity of the source address of IP packets received on an … |
| 1.3.6.1.4.1.9.9.454 | ciscoDot11LbsMIB | 3 | 23 | This MIB module supports network management for Location Based Services on IEEE 802.11 wireless LAN devices. Location Based Serv… |
| 1.3.6.1.4.1.9.9.455 | ciscoImageTc | 0 | 0 | This MIB module defines the textual conventions used in the enhanced image MIB. Glossary: Base Image Essential part of the operatin… |
| 1.3.6.1.4.1.9.9.456 | ciscoDot11WidsMIB | 3 | 50 | This MIB is intended to be implemented on the following IOS based network entities for the purpose of providing network managemen… |
| 1.3.6.1.4.1.9.9.457 | ciscoWdsIdsMIB | 2 | 18 | This MIB is intended to be implemented on all IOS based network entities that provide Wireless Domain Services, for the purpose o… |
| 1.3.6.1.4.1.9.9.458 | ciscoApplianceRedundancyMIB | 3 | 47 | This mib defines the SNMP objects to report the status of High Availability (HA) functionality in Cisco network management applia… |
| 1.3.6.1.4.1.9.9.459 | ciscoBitsClockMIB | 3 | 21 | This MIB provides information on Building Integrated Timing Supply(BITS) clocking sources and modes of operations. It is used to… |
| 1.3.6.1.4.1.9.9.460 | ciscoTpcMIB | 3 | 24 | The MIB module for Third Party Copy(TPC): Third Party Copy derives its name from the fact that there are three entities involved … |
| 1.3.6.1.4.1.9.9.461 | ciscoEtherCfmMIB | 3 | 39 | This MIB module defines the managed objects and notifications for Ethernet Connectivity Fault Management (CFM). CFM is an end-to-e… |
| 1.3.6.1.4.1.9.9.463 | ciscoSanTapMIB | 3 | 30 | MIB module to provide information about the SanTap service configuration. SanTap is a fibre channel switch based capability that p… |
| 1.3.6.1.4.1.9.9.466 | ciscoEthernetAccessMIB | 2 | 20 | The tables defined by this MIB module contain a collection of managed objects that are general in nature and apply to an edge dev… |
| 1.3.6.1.4.1.9.9.467 | ciscoCryptoAcceleratorMIB | 3 | 107 | The MIB module for monitoring the identity, status, activity and faults of crypto accelerator (CA) modules used in devices implem… |
| 1.3.6.1.4.1.9.9.468 | ciscoContextMappingMIB | 2 | 35 | A single SNMP agent sometimes needs to support multiple instances of the same MIB module, and does so through the use of multiple… |
| 1.3.6.1.4.1.9.9.470 | ciscoEnhancedSlbMIB | 3 | 106 | The MIB for managing Server Load Balancing Manager(s), and products supporting Server Load Balancing(SLB) features. This MIB exten… |
| 1.3.6.1.4.1.9.9.471 | ciscoFlexLinksMIB | 3 | 36 | This MIB module is for configuration and status query of Flex Links feature on the Cisco device. Flex Links are a pair of Layer 2… |
| 1.3.6.1.4.1.9.9.472 | ciscoModuleVirtualizationMIB | 3 | 35 | This MIB provides a way to create virtual contexts, and managing them. A virtual context is logical partition of a physical devi… |
| 1.3.6.1.4.1.9.9.473 | ciscoCcaMIB | 3 | 200 | The Cisco Contact Center Applications (CCCA) Management Information Base (MIB) module defines management instrumentation for appl… |
| 1.3.6.1.4.1.9.9.474 | ciscoFilterGroupMIB | 3 | 55 | The MIB module is for creating and configuring object groups to support packet filtering and access control on IP and other proto… |
| ... | ||||