Reference record for OID 1.3.6.1.4.1.9.9.599


parent
1.3.6.1.4.1.9.9 (ciscoMgmt)
node code
599
node name
ciscoLwappDot11ClientMIB
dot oid
1.3.6.1.4.1.9.9.599
type
OBJECT IDENTIFIER
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoLwappDot11ClientMIB(599)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoLwappDot11ClientMIB(599)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoLwappDot11ClientMIB(599)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoLwappDot11ClientMIB(599)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) cisco(9) ciscoMgmt(9) ciscoLwappDot11ClientMIB(599)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) cisco(9) ciscoMgmt(9) ciscoLwappDot11ClientMIB(599)}
  • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoLwappDot11ClientMIB
  • /iso/identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoLwappDot11ClientMIB
  • /iso/org/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoLwappDot11ClientMIB
  • /iso/org/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoLwappDot11ClientMIB
  • /iso/iso-identified-organization/dod/internet/private/enterprise/cisco/ciscoMgmt/ciscoLwappDot11ClientMIB
  • /iso/iso-identified-organization/dod/internet/private/enterprises/cisco/ciscoMgmt/ciscoLwappDot11ClientMIB
  • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/9/9/599

    Description by circitor

    This MIB is intended to be implemented on all those
    devices operating as Central controllers, that
    terminate the Light Weight Access Point Protocol
    tunnel from Cisco Light-weight LWAPP Access Points.

    Information provided by this MIB is about the
    configuration and monitoring of 802.11 wireless
    clients in the network.

    The relationship between CC and the LWAPP APs
    can be depicted as follows:

    +......+ +......+ +......+ +......+
    + + + + + + + +
    + CC + + CC + + CC + + CC +
    + + + + + + + +
    +......+ +......+ +......+ +......+
    .. . . .
    .. . . .
    . . . . .
    . . . . .
    . . . . .
    . . . . .
    +......+ +......+ +......+ +......+ +......+
    + + + + + + + + + +
    + AP + + AP + + AP + + AP + + AP +
    + + + + + + + + + +
    +......+ +......+ +......+ +......+ +......+
    . . . .
    . . . . .
    . . . . .
    . . . . .
    . . . . .
    +......+ +......+ +......+ +......+ +......+
    + + + + + + + + + +
    + MN + + MN + + MN + + MN + + MN +
    + + + + + + + + + +
    +......+ +......+ +......+ +......+ +......+

    The LWAPP tunnel exists between the controller and
    the APs. The MNs communicate with the APs through
    the protocol defined by the 802.11 standard.

    LWAPP APs, upon bootup, discover and join one of the
    controllers and the controller pushes the configuration,
    that includes the WLAN parameters, to the LWAPP APs.
    The APs then encapsulate all the 802.11 frames from
    wireless clients inside LWAPP frames and forward
    the LWAPP frames to the controller.

    GLOSSARY

    Access Point ( AP )

    An entity that contains an 802.11 medium access
    control ( MAC ) and physical layer ( PHY ) interface
    and provides access to the distribution services via
    the wireless medium for associated clients.

    LWAPP APs encapsulate all the 802.11 frames in
    LWAPP frames and sends them to the controller to which
    it is logically connected.

    Light Weight Access Point Protocol ( LWAPP )

    This is a generic protocol that defines the
    communication between the Access Points and the
    Central Controller.

    Mobile Node ( MN )

    A roaming 802.11 wireless device in a wireless
    network associated with an access point. Mobile Node,
    Mobile Station(Ms) and client are used
    interchangeably.

    Wireless local-area network ( WLAN )
    A local-area network that uses high-frequency radio
    waves rather than wires to communicate between nodes.

    Workgroup Bridge ( WGB )
    A WGB can provide a wireless infrastructure connection
    for a Ethernet-enabled devices. Devices that do not have
    a wireless client adapter in order to connect to the
    wireless network can be connected to a WGB through
    Ethernet port.

    REFERENCE

    [1] Wireless LAN Medium Access Control ( MAC ) and
    Physical Layer ( PHY ) Specifications

    [2] Draft-obara-capwap-lwapp-00.txt, IETF Light
    Weight Access Point Protocol

    Parsed from file CISCO-LWAPP-DOT11-CLIENT-MIB.mib
    Module: CISCO-LWAPP-DOT11-CLIENT-MIB

    Description by mibdepot

    This MIB is intended to be implemented on all those
    devices operating as Central controllers, that
    terminate the Light Weight Access Point Protocol
    tunnel from Cisco Light-weight LWAPP Access Points.

    Information provided by this MIB is about the
    configuration and monitoring of 802.11 wireless
    clients in the network.

    The relationship between CC and the LWAPP APs
    can be depicted as follows:

    +......+ +......+ +......+ +......+
    + + + + + + + +
    + CC + + CC + + CC + + CC +
    + + + + + + + +
    +......+ +......+ +......+ +......+
    .. . . .
    .. . . .
    . . . . .
    . . . . .
    . . . . .
    . . . . .
    +......+ +......+ +......+ +......+ +......+
    + + + + + + + + + +
    + AP + + AP + + AP + + AP + + AP +
    + + + + + + + + + +
    +......+ +......+ +......+ +......+ +......+
    . . . .
    . . . . .
    . . . . .
    . . . . .
    . . . . .
    +......+ +......+ +......+ +......+ +......+
    + + + + + + + + + +
    + MN + + MN + + MN + + MN + + MN +
    + + + + + + + + + +
    +......+ +......+ +......+ +......+ +......+

    The LWAPP tunnel exists between the controller and
    the APs. The MNs communicate with the APs through
    the protocol defined by the 802.11 standard.

    LWAPP APs, upon bootup, discover and join one of the
    controllers and the controller pushes the configuration,
    that includes the WLAN parameters, to the LWAPP APs.
    The APs then encapsulate all the 802.11 frames from
    wireless clients inside LWAPP frames and forward
    the LWAPP frames to the controller.

    GLOSSARY

    Access Point ( AP )

    An entity that contains an 802.11 medium access
    control ( MAC ) and physical layer ( PHY ) interface
    and provides access to the distribution services via
    the wireless medium for associated clients.

    LWAPP APs encapsulate all the 802.11 frames in
    LWAPP frames and sends them to the controller to which
    it is logically connected.

    Light Weight Access Point Protocol ( LWAPP )

    This is a generic protocol that defines the
    communication between the Access Points and the
    Central Controller.

    Mobile Node ( MN )

    A roaming 802.11 wireless device in a wireless
    network associated with an access point. Mobile Node,
    Mobile Station(Ms) and client are used
    interchangeably.

    Wireless local-area network ( WLAN )
    A local-area network that uses high-frequency radio
    waves rather than wires to communicate between nodes.

    Workgroup Bridge ( WGB )
    A WGB can provide a wireless infrastructure connection
    for a Ethernet-enabled devices. Devices that do not have
    a wireless client adapter in order to connect to the
    wireless network can be connected to a WGB through
    Ethernet port.

    REFERENCE

    [1] Wireless LAN Medium Access Control ( MAC ) and
    Physical Layer ( PHY ) Specifications

    [2] Draft-obara-capwap-lwapp-00.txt, IETF Light
    Weight Access Point Protocol

    Parsed from file CISCO-LWAPP-DOT11-CLIENT-MIB.my.txt
    Company: None
    Module: CISCO-LWAPP-DOT11-CLIENT-MIB

    Description by cisco

    This MIB is intended to be implemented on all those
    devices operating as Central controllers, that
    terminate the Light Weight Access Point Protocol
    tunnel from Cisco Light-weight LWAPP Access Points.

    Information provided by this MIB is about the
    configuration and monitoring of 802.11 wireless
    clients in the network.

    The relationship between CC and the LWAPP APs
    can be depicted as follows:

    +......+ +......+ +......+ +......+
    + + + + + + + +
    + CC + + CC + + CC + + CC +
    + + + + + + + +
    +......+ +......+ +......+ +......+
    .. . . .
    .. . . .
    . . . . .
    . . . . .
    . . . . .
    . . . . .
    +......+ +......+ +......+ +......+ +......+
    + + + + + + + + + +
    + AP + + AP + + AP + + AP + + AP +
    + + + + + + + + + +
    +......+ +......+ +......+ +......+ +......+
    . . . .
    . . . . .
    . . . . .
    . . . . .
    . . . . .
    +......+ +......+ +......+ +......+ +......+
    + + + + + + + + + +
    + MN + + MN + + MN + + MN + + MN +
    + + + + + + + + + +
    +......+ +......+ +......+ +......+ +......+

    The LWAPP tunnel exists between the controller and
    the APs. The MNs communicate with the APs through
    the protocol defined by the 802.11 standard.

    LWAPP APs, upon bootup, discover and join one of the
    controllers and the controller pushes the configuration,
    that includes the WLAN parameters, to the LWAPP APs.
    The APs then encapsulate all the 802.11 frames from
    wireless clients inside LWAPP frames and forward
    the LWAPP frames to the controller.

    GLOSSARY

    Access Point ( AP )

    An entity that contains an 802.11 medium access
    control ( MAC ) and physical layer ( PHY ) interface
    and provides access to the distribution services via
    the wireless medium for associated clients.

    LWAPP APs encapsulate all the 802.11 frames in
    LWAPP frames and sends them to the controller to which
    it is logically connected.

    Light Weight Access Point Protocol ( LWAPP )

    This is a generic protocol that defines the
    communication between the Access Points and the
    Central Controller.

    Mobile Node ( MN )

    A roaming 802.11 wireless device in a wireless
    network associated with an access point. Mobile Node,
    Mobile Station(Ms) and client are used
    interchangeably.

    Wireless local-area network ( WLAN )
    A local-area network that uses high-frequency radio
    waves rather than wires to communicate between nodes.

    Workgroup Bridge ( WGB )
    A WGB can provide a wireless infrastructure connection
    for a Ethernet-enabled devices. Devices that do not have
    a wireless client adapter in order to connect to the
    wireless network can be connected to a WGB through
    Ethernet port.

    REFERENCE

    [1] Wireless LAN Medium Access Control ( MAC ) and
    Physical Layer ( PHY ) Specifications

    [2] Draft-obara-capwap-lwapp-00.txt, IETF Light
    Weight Access Point Protocol

    Information by circitor

    ciscoLwappDot11ClientMIB MODULE-IDENTITY LAST-UPDATED "200611210000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO "Cisco Systems, Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS Email: [email protected]" DESCRIPTION "This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Access Point Protocol tunnel from Cisco Light-weight LWAPP Access Points. Information provided by this MIB is about the configuration and monitoring of 802.11 wireless clients in the network. The relationship between CC and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ +......+ + + + + + + + + + CC + + CC + + CC + + CC + + + + + + + + + +......+ +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + AP + + AP + + AP + + AP + + AP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + MN + + MN + + MN + + MN + + MN + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends them to the controller to which it is logically connected. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the Central Controller. Mobile Node ( MN ) A roaming 802.11 wireless device in a wireless network associated with an access point. Mobile Node, Mobile Station(Ms) and client are used interchangeably. Wireless local-area network ( WLAN ) A local-area network that uses high-frequency radio waves rather than wires to communicate between nodes. Workgroup Bridge ( WGB ) A WGB can provide a wireless infrastructure connection for a Ethernet-enabled devices. Devices that do not have a wireless client adapter in order to connect to the wireless network can be connected to a WGB through Ethernet port. REFERENCE [1] Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol " REVISION "200611210000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 599 }

    Information by cisco_v1

    ciscoLwappDot11ClientMIB OBJECT IDENTIFIER ::= { ciscoMgmt 599 }

    Information by oid_info

    Vendor: Cisco
    Module: CISCO-LWAPP-DOT11-CLIENT-MIB

    [Automatically extracted from oidview.com]

    Information by mibdepot

    ciscoLwappDot11ClientMIB MODULE-IDENTITY LAST-UPDATED "200611210000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO "Cisco Systems, Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS Email: [email protected]" DESCRIPTION "This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Access Point Protocol tunnel from Cisco Light-weight LWAPP Access Points. Information provided by this MIB is about the configuration and monitoring of 802.11 wireless clients in the network. The relationship between CC and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ +......+ + + + + + + + + + CC + + CC + + CC + + CC + + + + + + + + + +......+ +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + AP + + AP + + AP + + AP + + AP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + MN + + MN + + MN + + MN + + MN + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends them to the controller to which it is logically connected. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the Central Controller. Mobile Node ( MN ) A roaming 802.11 wireless device in a wireless network associated with an access point. Mobile Node, Mobile Station(Ms) and client are used interchangeably. Wireless local-area network ( WLAN ) A local-area network that uses high-frequency radio waves rather than wires to communicate between nodes. Workgroup Bridge ( WGB ) A WGB can provide a wireless infrastructure connection for a Ethernet-enabled devices. Devices that do not have a wireless client adapter in order to connect to the wireless network can be connected to a WGB through Ethernet port. REFERENCE [1] Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol " REVISION "200611210000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 599 }

    Information by cisco

    ciscoLwappDot11ClientMIB MODULE-IDENTITY LAST-UPDATED "200611210000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO "Cisco Systems, Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS Email: [email protected]" DESCRIPTION "This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Access Point Protocol tunnel from Cisco Light-weight LWAPP Access Points. Information provided by this MIB is about the configuration and monitoring of 802.11 wireless clients in the network. The relationship between CC and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ +......+ + + + + + + + + + CC + + CC + + CC + + CC + + + + + + + + + +......+ +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + AP + + AP + + AP + + AP + + AP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + MN + + MN + + MN + + MN + + MN + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends them to the controller to which it is logically connected. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the Central Controller. Mobile Node ( MN ) A roaming 802.11 wireless device in a wireless network associated with an access point. Mobile Node, Mobile Station(Ms) and client are used interchangeably. Wireless local-area network ( WLAN ) A local-area network that uses high-frequency radio waves rather than wires to communicate between nodes. Workgroup Bridge ( WGB ) A WGB can provide a wireless infrastructure connection for a Ethernet-enabled devices. Devices that do not have a wireless client adapter in order to connect to the wireless network can be connected to a WGB through Ethernet port. REFERENCE [1] Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol " REVISION "200611210000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 599 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Greg Satz

    Current Registration Authority (recovered by parent 1.3.6.1.4.1.9)

    Cisco Systems, Inc.

    Children (4)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.9.9.599.0 ciscoLwappDot11ClientMIBNotifs 4 4 None
    1.3.6.1.4.1.9.9.599.1 ciscoLwappDot11ClientMIBObjects 4 35 None
    1.3.6.1.4.1.9.9.599.2 ciscoLwappDot11ClientMIBConform 2 6 None
    1.3.6.1.4.1.9.9.599.3 ciscoLwappDot11ClientCcxMIBObjects 0 0 None

    Brothers (645)

    To many brothers! Only 100 nearest brothers are shown.

    OIDNameSub childrenSub Nodes TotalDescription
    ...
    1.3.6.1.4.1.9.9.572 ciscoRttMonIPExtMIB 2 38 This MIB contains extensions to tables in CISCO-RTTMON-MIB
    to support IP-layer extensions, specifically IPv6 addresses
    and other …
    1.3.6.1.4.1.9.9.573 ciscoQosTcMIB 0 0 This module defines the textual conventions used within
    Cisco Qos MIBs.
    1.3.6.1.4.1.9.9.576 ciscoLwappMobilityMIB 3 60 This MIB is intended to be implemented on all those
    devices operating as Central Controllers (CC) that

    terminate the Light Weight…
    1.3.6.1.4.1.9.9.577 ciscoLwappAclMIB 3 26 This MIB is intended to be implemented on all those
    devices operating as Central Controllers (CC) that
    terminate the Light Weight…
    1.3.6.1.4.1.9.9.578 ciscoRoutePoliciesMIB 3 5 This module provides a subtree to define OIDs so that
    various routing 'policies' used by Cisco routers can be
    expressed. This mod…
    1.3.6.1.4.1.9.9.580 ciscoSwitchQosMIB 3 295 This MIB module extends the CISCO-CLASS-BASED-QOS-MIB
    by defining configuration and statistics information
    specific to the qualit…
    1.3.6.1.4.1.9.9.583 ciscoGslbTcMIB 0 0 This MIB module defines Textual Conventions and
    OBJECT-IDENTITIES for use in documents defining
    management information base (MIBs…
    1.3.6.1.4.1.9.9.584 ciscoEntityDiagTcMIB 0 0 This module defines the textual conventions used within
    Cisco Entity Diag MIB.
    1.3.6.1.4.1.9.9.585 ciscoIpSlaEthernetMIB 3 194 This MIB module consists of two parts.

    1) Auto-Ethernet-CFM Control:
    |
    |

    2) ethernetJitter Stats:
    |
    |

    The first part defines a mechani…
    1.3.6.1.4.1.9.9.586 ciscoNotificationControlMIB 2 28 This MIB provides network management support to regulate
    the transmission of notifications generated by a
    system providing networ…
    1.3.6.1.4.1.9.9.589 ciscoGslbSystemMIB 3 103 This MIB module defines objects for network and system
    information of Global Server Load Balancer(GSLB) as a
    network device. A G…
    1.3.6.1.4.1.9.9.590 ciscoCvpMIB 3 255 The Cisco Unified Customer Voice Portal (CVP) application
    integrates with both traditional time-division multiplexing
    (TDM) and I…
    1.3.6.1.4.1.9.9.592 ciscoPrefPathMIB 3 56 The MIB module for the management of
    preferred path. This MIB enables managers
    to configure and monitor Preferred Path
    parameters.…
    1.3.6.1.4.1.9.9.593 ciscoFcSdvMIB 3 28 This MIB instrumentation is for managing Fibre
    Channel (FC) SAN Device Virtualization (SDV)
    solution on Cisco Fibre Channel devic…
    1.3.6.1.4.1.9.9.594 ciscoApplicationAccelerationMIB 3 37 This is a MIB for managing Application Acceleration System(s).
    This MIB includes instrumentation for providing the
    performance st…
    1.3.6.1.4.1.9.9.595 ciscoGslbDnsMIB 3 165 The MIB defines objects for status and statistics
    information of DNS related operations of
    Global Server Load Balancer(GSLB). Th…
    1.3.6.1.4.1.9.9.597 ciscoContentServicesMIB 3 349 Content Service is a capability to examine IP/TCP/UDP headers,
    payload and enable billing based on the content being provided.

    Ab…
    1.3.6.1.4.1.9.9.598 ciscoLwappAAAMIB 3 73 This MIB is intended to be implemented on all those
    devices operating as Central Controllers (CC), that
    terminate the Light Weigh…
    1.3.6.1.4.1.9.9.600 ciscoGslbHealthMonMIB 3 90 The MIB defines objects related to global keepalive
    properties in GSLB devices. It contains the tables
    for keep alive configurat…
    1.3.6.1.4.1.9.9.601 ciscoResilientEthernetProtocolMIB 3 77 This MIB module defines objects required for managing
    Resilient Ethernet Protocol (REP).

    Resilient Ethernet Protocol (REP) is a C…
    1.3.6.1.4.1.9.9.602 ciscoPacketCaptureMIB 3 103 The MIB module for the management of packet capture
    feature.
    1.3.6.1.4.1.9.9.603 ciscoThreatMitigationServiceMIB 3 68 This MIB provides management information about the Threat
    Mitigation Service(TMS) entity named 'Consumer'. TMS is part
    of Cisco's…
    1.3.6.1.4.1.9.9.604 cdot1CfmMIB 3 166 Connectivity Fault Management module for managing IEEE 802.1ag
    1.3.6.1.4.1.9.9.606 ciscoLwappMeshLinkTestMIB 3 46 ciscoLwappMeshLinkTestMIB MODULE-IDENTITY
    LAST-UPDATED "200702050000Z"
    ORGANIZATION "Cisco Systems Inc."
    CONTACT-INFO
    "Cisco Sy…
    1.3.6.1.4.1.9.9.607 ciscoDot11HtPhyMIB 3 71 This MIB is intended to be implemented on Cisco's
    WLAN devices that provide the wired uplink to wireless
    clients through the high…
    1.3.6.1.4.1.9.9.610 ciscoLwappRogueMIB 3 78 This MIB is intended to be implemented on all those
    devices operating as Central Controllers, that
    terminate the Light Weight Acc…
    1.3.6.1.4.1.9.9.611 ciscoLwappDot11ClientCCXTextualConventions 0 0 This module defines the textual conventions used
    throughout the Cisco enterprise MIBs designed for
    implementation on Central Cont…
    1.3.6.1.4.1.9.9.612 ciscoLwappDot11MIB 3 17 This MIB is intended to be implemented on all those
    devices operating as Central controllers, that
    terminate the Light Weight Acc…
    1.3.6.1.4.1.9.9.613 ciscoEvcMIB 3 156 Metro Ethernet services can support a wide range of
    applications and subscriber needs easily, efficiently
    and cost-effectively. …
    1.3.6.1.4.1.9.9.614 ciscoLwappDot11LdapMIB 3 33 This MIB is intended to be implemented on all those
    devices operating as Central controllers, that
    terminate the Light Weight Acc…
    1.3.6.1.4.1.9.9.615 ciscoLwappRrmMIB 3 28 This MIB is intended to be implemented on all those
    devices operating as Central controllers, that
    terminate the Light Weight Acc…
    1.3.6.1.4.1.9.9.616 ciscoLwappMeshMIB 3 121 This MIB is intended to be implemented on all those
    devices operating as Central Controllers (CC) that
    terminate the Light Weight…
    1.3.6.1.4.1.9.9.617 ciscoLwappMeshStatsMIB 4 98 This MIB is intended to be implemented on all those
    devices operating as Central Controllers (CC) that
    terminate the Light Weight…
    1.3.6.1.4.1.9.9.618 ciscoLwappSysMIB 3 163 This MIB is intended to be implemented on all those
    devices operating as Central controllers, that
    terminate the Light Weight Acc…
    1.3.6.1.4.1.9.9.619 ciscoLwappLocalAuthMIB 3 53 This MIB is intended to be implemented on all those
    devices operating as Central controllers, that
    terminate the Light Weight Acc…
    1.3.6.1.4.1.9.9.620 ciscoLwappMeshBatteryMIB 3 34 This MIB is intended to be implemented on all those
    devices operating as Central Controllers (CC) that
    terminate the Light Weight…
    1.3.6.1.4.1.9.9.621 ciscoH324DialControlMIB 2 34 This MIB module enhances the IETF Dial Control MIB
    (RFC2128) by providing H.324 call information over
    a telephony network.

    ITU-T R…
    1.3.6.1.4.1.9.9.622 ciscoLwappDot11ClientTsMIB 3 34 This MIB is intended to be implemented on all those
    devices operating as Central controllers, that
    terminate the Light Weight Acc…
    1.3.6.1.4.1.9.9.623 ciscoLwappCdpMIB 3 51 This MIB is intended to be implemented on all those
    devices operating as Central Controllers (CC) that
    terminate the Light Weight…
    1.3.6.1.4.1.9.9.624 ciscoIpSlaTCMIB 0 0 This MIB contains textual conventions used by
    CISCO IPSLA MIBs.

    Acronyms:
    FEC: Forward Equivalence Class
    LPD: Label Path Discovery
    L…
    1.3.6.1.4.1.9.9.626 ciscoDot11HtMacMIB 3 40 This MIB is intended to be implemented on Cisco's
    WLAN devices that provide the wired uplink to wireless
    clients through the high…
    1.3.6.1.4.1.9.9.627 ciscoDot11RadarMIB 3 25 This MIB module is for IEEE 802.11a/h Root device,
    i.e. Access Point (AP) or Root Bridge. This MIB
    allows dynamic frequency selec…
    1.3.6.1.4.1.9.9.628 ciscoServiceControlSubscribersMIB 3 37 This MIB provides global and specific information on
    subscribers managed by a service control entity, which is a
    network element …
    1.3.6.1.4.1.9.9.630 ciscoTelnetServerMIB 3 34 MIB module for displaying and configuring
    Telnet related features in a device.
    Telnet is a program to log into another computer o…
    1.3.6.1.4.1.9.9.631 ciscoServiceControlLinkMIB 3 21 This MIB module provides information about the status and
    configuration of links used by service control entities.

    The link on a …
    1.3.6.1.4.1.9.9.632 ciscoSmeMIB 3 54 MIB module to manage Storage Media Encryption (SME) service.
    SME is an encryption service provided by an encryption node
    residing…
    1.3.6.1.4.1.9.9.633 ciscoIpSlaAutoMIB 3 57 This module defines the MIB for IP SLA Automation. IP SLA
    Automation consists of the following:
    1. Use of grouping - Group is an …
    1.3.6.1.4.1.9.9.634 ciscoServiceControlTpStatsMIB 3 39 This MIB provides information and statistics on the traffic
    processor(s) of a service control entity, which is a network
    element …
    1.3.6.1.4.1.9.9.635 ciscoIpSlaJitterMIB 3 57 This MIB module defines templates for IP SLA operations of UDP
    Jitter and ICMP Jitter.

    The UDP Jitter operation is designed to me…
    1.3.6.1.4.1.9.9.636 ciscoIpSlaEchoMIB 3 71 This MIB module defines the templates for IP SLA operations of
    ICMP echo, UDP echo and TCP connect.

    The ICMP echo operation measu…
    1.3.6.1.4.1.9.9.637 ciscoServiceControlRdrMIB 3 56 This MIB module defines objects describing statistics and
    configuration relating to the Raw Data Record Formatter running
    on a se…
    1.3.6.1.4.1.9.9.638 ciscoAgwMIB 3 324 This module manages Cisco's WiMAX ASN Gateway (ASN-GW).
    A WiMAX network supports wireless data communication through
    WiMAX radio …
    1.3.6.1.4.1.9.9.639 ciscoOtnIfMIB 3 137 This MIB module defines the managed objects for physical layer
    characteristics of DWDM optical channel interfaces and performanc…
    1.3.6.1.4.1.9.9.640 ciscoImageLicenseMgmtMIB 3 31 The MIB module for managing the running image level
    of a Cisco device. Cisco's licensing mechanism provides
    flexibility to run a …
    1.3.6.1.4.1.9.9.642 ciscoBridgeDomainMIB 3 24 A bridge domain is one of the means by which it is possible
    to define a broadcast domain on a bridging device. It is an
    alternati…
    1.3.6.1.4.1.9.9.643 ciscoTelepresenceMIB 3 119 The MIB module defines the managed objects for a
    Telepresence system.

    Telepresence refers to a set of technologies which
    allow a p…
    1.3.6.1.4.1.9.9.644 ciscoTelepresenceCallMIB 3 178 The MIB module defines the managed objects for
    Telepresence calls.

    Telepresence refers to a set of technologies which
    allow a pers…
    1.3.6.1.4.1.9.9.645 ciscoEtherExtMIB 3 18 The MIB module to describe generic objects for
    ethernet-like network interfaces.

    This MIB provides ethernet-like network interfac…
    1.3.6.1.4.1.9.9.646 ciscoAonStatusMIB 3 80 This MIB module defines managed objects that facilitate the
    management of AON node.

    The information available through this MIB in…
    1.3.6.1.4.1.9.9.647 ciscoGgsnExtMIB 3 212 This MIB module extends the CISCO-GGSN-MIB.

    This MIB module manages the Gateway GPRS Support
    Node (GGSN) devices.

    A GGSN device pr…
    1.3.6.1.4.1.9.9.648 ciscoVirtualInterfaceMIB 2 32 The MIB module for creation and deletion of Virtual Interfaces
    and Virtual Interface Groups. In addition to this MIB,
    interface …
    ...