This module defines the textual conventions used
throughout the Cisco enterprise MIBs designed for
implementation on Central Controllers (CC) that
terminate the Light Weight Access Point Protocol
tunnel from Light-weight LWAPP Access Points,
specifically for the functions of the Cisco Client
Extensions (CCX) program.
This MIB provides textual conventions used in the
configuration and status information mibs
about the CCX clients that the controller is aware of.
GLOSSARY
Light Weight Access Point Protocol ( LWAPP )
This is a generic protocol that defines the
communication between the Access Points and the
Central Controller.
Mobile Node ( MN )
A roaming 802.11 wireless device in a wireless
network associated with an access point. Mobile Node,
Mobile Station(Ms) and client are used
interchangeably.
Cisco Client eXtentions (CCX)
The Cisco Client Extensions (CCX) Program is a
program of working through silicon providers to
embed Cisco client technology in wireless client
reference designs, and to promote compliant and
interoperable third-party clients with Cisco's
infrastructure, thus further driving wireless adoption
in the market.
Extensible Authentication Protocol (EAP)
The Extensible Authentication Protocol (EAP) is an
Internet Engineering Task Force (IETF) standard that
provides an infrastructure for network access clients and
authentication servers to host plug-in modules for current
and future authentication methods and technologies.
Wired Equivalent Privacy (WEP)
A security method defined by 802.11. WEP uses a
symmetric key stream cipher called RC4 to encrypt the data
packets.
REFERENCE
[1] Part 11 Wireless LAN Medium Access Control ( MAC )
and Physical Layer ( PHY ) Specifications.
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
Weight Access Point Protocol.
[3] Cisco Compatible Extensions for WLAN Devices
Version 5.0.11
Parsed from file CISCO-LWAPP-DOT11-CLIENT-CCX-TC-MIB.mib
Module: CISCO-LWAPP-DOT11-CLIENT-CCX-TC-MIB
This module defines the textual conventions used
throughout the Cisco enterprise MIBs designed for
implementation on Central Controllers (CC) that
terminate the Light Weight Access Point Protocol
tunnel from Light-weight LWAPP Access Points,
specifically for the functions of the Cisco Client
Extensions (CCX) program.
This MIB provides textual conventions used in the
configuration and status information mibs
about the CCX clients that the controller is aware of.
GLOSSARY
Light Weight Access Point Protocol ( LWAPP )
This is a generic protocol that defines the
communication between the Access Points and the
Central Controller.
Mobile Node ( MN )
A roaming 802.11 wireless device in a wireless
network associated with an access point. Mobile Node,
Mobile Station(Ms) and client are used
interchangeably.
Cisco Client eXtentions (CCX)
The Cisco Client Extensions (CCX) Program is a
program of working through silicon providers to
embed Cisco client technology in wireless client
reference designs, and to promote compliant and
interoperable third-party clients with Cisco's
infrastructure, thus further driving wireless adoption
in the market.
Extensible Authentication Protocol (EAP)
The Extensible Authentication Protocol (EAP) is an
Internet Engineering Task Force (IETF) standard that
provides an infrastructure for network access clients and
authentication servers to host plug-in modules for current
and future authentication methods and technologies.
Wired Equivalent Privacy (WEP)
A security method defined by 802.11. WEP uses a
symmetric key stream cipher called RC4 to encrypt the data
packets.
REFERENCE
[1] Part 11 Wireless LAN Medium Access Control ( MAC )
and Physical Layer ( PHY ) Specifications.
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
Weight Access Point Protocol.
[3] Cisco Compatible Extensions for WLAN Devices
Version 5.0.11
Parsed from file CISCO-LWAPP-DOT11-CLIENT-CCX-TC-MIB.my.txt
Company: None
Module: CISCO-LWAPP-DOT11-CLIENT-CCX-TC-MIB
This module defines the textual conventions used
throughout the Cisco enterprise MIBs designed for
implementation on Central Controllers (CC) that
terminate the Light Weight Access Point Protocol
tunnel from Light-weight LWAPP Access Points,
specifically for the functions of the Cisco Client
Extensions (CCX) program.
This MIB provides textual conventions used in the
configuration and status information mibs
about the CCX clients that the controller is aware of.
GLOSSARY
Light Weight Access Point Protocol ( LWAPP )
This is a generic protocol that defines the
communication between the Access Points and the
Central Controller.
Mobile Node ( MN )
A roaming 802.11 wireless device in a wireless
network associated with an access point. Mobile Node,
Mobile Station(Ms) and client are used
interchangeably.
Cisco Client eXtentions (CCX)
The Cisco Client Extensions (CCX) Program is a
program of working through silicon providers to
embed Cisco client technology in wireless client
reference designs, and to promote compliant and
interoperable third-party clients with Cisco's
infrastructure, thus further driving wireless adoption
in the market.
Extensible Authentication Protocol (EAP)
The Extensible Authentication Protocol (EAP) is an
Internet Engineering Task Force (IETF) standard that
provides an infrastructure for network access clients and
authentication servers to host plug-in modules for current
and future authentication methods and technologies.
Wired Equivalent Privacy (WEP)
A security method defined by 802.11. WEP uses a
symmetric key stream cipher called RC4 to encrypt the data
packets.
REFERENCE
[1] Part 11 Wireless LAN Medium Access Control ( MAC )
and Physical Layer ( PHY ) Specifications.
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
Weight Access Point Protocol.
[3] Cisco Compatible Extensions for WLAN Devices
Version 5.0.11
ciscoLwappDot11ClientCCXTextualConventions MODULE-IDENTITY LAST-UPDATED "200703220000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO "Cisco Systems, Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS Email: [email protected]" DESCRIPTION "This module defines the textual conventions used throughout the Cisco enterprise MIBs designed for implementation on Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel from Light-weight LWAPP Access Points, specifically for the functions of the Cisco Client Extensions (CCX) program. This MIB provides textual conventions used in the configuration and status information mibs about the CCX clients that the controller is aware of. GLOSSARY Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the Central Controller. Mobile Node ( MN ) A roaming 802.11 wireless device in a wireless network associated with an access point. Mobile Node, Mobile Station(Ms) and client are used interchangeably. Cisco Client eXtentions (CCX) The Cisco Client Extensions (CCX) Program is a program of working through silicon providers to embed Cisco client technology in wireless client reference designs, and to promote compliant and interoperable third-party clients with Cisco's infrastructure, thus further driving wireless adoption in the market. Extensible Authentication Protocol (EAP) The Extensible Authentication Protocol (EAP) is an Internet Engineering Task Force (IETF) standard that provides an infrastructure for network access clients and authentication servers to host plug-in modules for current and future authentication methods and technologies. Wired Equivalent Privacy (WEP) A security method defined by 802.11. WEP uses a symmetric key stream cipher called RC4 to encrypt the data packets. REFERENCE [1] Part 11 Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications. [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol. [3] Cisco Compatible Extensions for WLAN Devices Version 5.0.11" REVISION "200703220000Z" DESCRIPTION "Added 2 more radio types to CiscoLwappDot11ClientRadioType." REVISION "200702220000Z" DESCRIPTION "Reverted some of the enum names to be in line with the CCXV5 spec." REVISION "200702190000Z" DESCRIPTION "Incorporated review comments." REVISION "200701300000Z" DESCRIPTION "Initial version of this mib module." ::= { ciscoMgmt 611 }
ciscoLwappDot11ClientCCXTextualConventions OBJECT IDENTIFIER ::= { ciscoMgmt 611 }
Vendor: Cisco
Module: CISCO-LWAPP-DOT11-CLIENT-CCX-TC-MIB
[Automatically extracted from oidview.com]
ciscoLwappDot11ClientCCXTextualConventions MODULE-IDENTITY LAST-UPDATED "200703220000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO "Cisco Systems, Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS Email: [email protected]" DESCRIPTION "This module defines the textual conventions used throughout the Cisco enterprise MIBs designed for implementation on Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel from Light-weight LWAPP Access Points, specifically for the functions of the Cisco Client Extensions (CCX) program. This MIB provides textual conventions used in the configuration and status information mibs about the CCX clients that the controller is aware of. GLOSSARY Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the Central Controller. Mobile Node ( MN ) A roaming 802.11 wireless device in a wireless network associated with an access point. Mobile Node, Mobile Station(Ms) and client are used interchangeably. Cisco Client eXtentions (CCX) The Cisco Client Extensions (CCX) Program is a program of working through silicon providers to embed Cisco client technology in wireless client reference designs, and to promote compliant and interoperable third-party clients with Cisco's infrastructure, thus further driving wireless adoption in the market. Extensible Authentication Protocol (EAP) The Extensible Authentication Protocol (EAP) is an Internet Engineering Task Force (IETF) standard that provides an infrastructure for network access clients and authentication servers to host plug-in modules for current and future authentication methods and technologies. Wired Equivalent Privacy (WEP) A security method defined by 802.11. WEP uses a symmetric key stream cipher called RC4 to encrypt the data packets. REFERENCE [1] Part 11 Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications. [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol. [3] Cisco Compatible Extensions for WLAN Devices Version 5.0.11" REVISION "200703220000Z" DESCRIPTION "Added 2 more radio types to CiscoLwappDot11ClientRadioType." REVISION "200702220000Z" DESCRIPTION "Reverted some of the enum names to be in line with the CCXV5 spec." REVISION "200702190000Z" DESCRIPTION "Incorporated review comments." REVISION "200701300000Z" DESCRIPTION "Initial version of this mib module." ::= { ciscoMgmt 611 }
ciscoLwappDot11ClientCCXTextualConventions MODULE-IDENTITY LAST-UPDATED "200703220000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO "Cisco Systems, Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS Email: [email protected]" DESCRIPTION "This module defines the textual conventions used throughout the Cisco enterprise MIBs designed for implementation on Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel from Light-weight LWAPP Access Points, specifically for the functions of the Cisco Client Extensions (CCX) program. This MIB provides textual conventions used in the configuration and status information mibs about the CCX clients that the controller is aware of. GLOSSARY Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the Central Controller. Mobile Node ( MN ) A roaming 802.11 wireless device in a wireless network associated with an access point. Mobile Node, Mobile Station(Ms) and client are used interchangeably. Cisco Client eXtentions (CCX) The Cisco Client Extensions (CCX) Program is a program of working through silicon providers to embed Cisco client technology in wireless client reference designs, and to promote compliant and interoperable third-party clients with Cisco's infrastructure, thus further driving wireless adoption in the market. Extensible Authentication Protocol (EAP) The Extensible Authentication Protocol (EAP) is an Internet Engineering Task Force (IETF) standard that provides an infrastructure for network access clients and authentication servers to host plug-in modules for current and future authentication methods and technologies. Wired Equivalent Privacy (WEP) A security method defined by 802.11. WEP uses a symmetric key stream cipher called RC4 to encrypt the data packets. REFERENCE [1] Part 11 Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications. [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol. [3] Cisco Compatible Extensions for WLAN Devices Version 5.0.11" REVISION "200703220000Z" DESCRIPTION "Added 2 more radio types to CiscoLwappDot11ClientRadioType." REVISION "200702220000Z" DESCRIPTION "Reverted some of the enum names to be in line with the CCXV5 spec." REVISION "200702190000Z" DESCRIPTION "Incorporated review comments." REVISION "200701300000Z" DESCRIPTION "Initial version of this mib module." ::= { ciscoMgmt 611 }
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.9.9.572 | ciscoRttMonIPExtMIB | 2 | 38 | This MIB contains extensions to tables in CISCO-RTTMON-MIB to support IP-layer extensions, specifically IPv6 addresses and other … |
| 1.3.6.1.4.1.9.9.573 | ciscoQosTcMIB | 0 | 0 | This module defines the textual conventions used within Cisco Qos MIBs. |
| 1.3.6.1.4.1.9.9.576 | ciscoLwappMobilityMIB | 3 | 60 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
| 1.3.6.1.4.1.9.9.577 | ciscoLwappAclMIB | 3 | 26 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
| 1.3.6.1.4.1.9.9.578 | ciscoRoutePoliciesMIB | 3 | 5 | This module provides a subtree to define OIDs so that various routing 'policies' used by Cisco routers can be expressed. This mod… |
| 1.3.6.1.4.1.9.9.580 | ciscoSwitchQosMIB | 3 | 295 | This MIB module extends the CISCO-CLASS-BASED-QOS-MIB by defining configuration and statistics information specific to the qualit… |
| 1.3.6.1.4.1.9.9.583 | ciscoGslbTcMIB | 0 | 0 | This MIB module defines Textual Conventions and OBJECT-IDENTITIES for use in documents defining management information base (MIBs… |
| 1.3.6.1.4.1.9.9.584 | ciscoEntityDiagTcMIB | 0 | 0 | This module defines the textual conventions used within Cisco Entity Diag MIB. |
| 1.3.6.1.4.1.9.9.585 | ciscoIpSlaEthernetMIB | 3 | 194 | This MIB module consists of two parts. 1) Auto-Ethernet-CFM Control: | | 2) ethernetJitter Stats: | | The first part defines a mechani… |
| 1.3.6.1.4.1.9.9.586 | ciscoNotificationControlMIB | 2 | 28 | This MIB provides network management support to regulate the transmission of notifications generated by a system providing networ… |
| 1.3.6.1.4.1.9.9.589 | ciscoGslbSystemMIB | 3 | 103 | This MIB module defines objects for network and system information of Global Server Load Balancer(GSLB) as a network device. A G… |
| 1.3.6.1.4.1.9.9.590 | ciscoCvpMIB | 3 | 255 | The Cisco Unified Customer Voice Portal (CVP) application integrates with both traditional time-division multiplexing (TDM) and I… |
| 1.3.6.1.4.1.9.9.592 | ciscoPrefPathMIB | 3 | 56 | The MIB module for the management of preferred path. This MIB enables managers to configure and monitor Preferred Path parameters.… |
| 1.3.6.1.4.1.9.9.593 | ciscoFcSdvMIB | 3 | 28 | This MIB instrumentation is for managing Fibre Channel (FC) SAN Device Virtualization (SDV) solution on Cisco Fibre Channel devic… |
| 1.3.6.1.4.1.9.9.594 | ciscoApplicationAccelerationMIB | 3 | 37 | This is a MIB for managing Application Acceleration System(s). This MIB includes instrumentation for providing the performance st… |
| 1.3.6.1.4.1.9.9.595 | ciscoGslbDnsMIB | 3 | 165 | The MIB defines objects for status and statistics information of DNS related operations of Global Server Load Balancer(GSLB). Th… |
| 1.3.6.1.4.1.9.9.597 | ciscoContentServicesMIB | 3 | 349 | Content Service is a capability to examine IP/TCP/UDP headers, payload and enable billing based on the content being provided. Ab… |
| 1.3.6.1.4.1.9.9.598 | ciscoLwappAAAMIB | 3 | 73 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC), that terminate the Light Weigh… |
| 1.3.6.1.4.1.9.9.599 | ciscoLwappDot11ClientMIB | 4 | 49 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.600 | ciscoGslbHealthMonMIB | 3 | 90 | The MIB defines objects related to global keepalive properties in GSLB devices. It contains the tables for keep alive configurat… |
| 1.3.6.1.4.1.9.9.601 | ciscoResilientEthernetProtocolMIB | 3 | 77 | This MIB module defines objects required for managing Resilient Ethernet Protocol (REP). Resilient Ethernet Protocol (REP) is a C… |
| 1.3.6.1.4.1.9.9.602 | ciscoPacketCaptureMIB | 3 | 103 | The MIB module for the management of packet capture feature. |
| 1.3.6.1.4.1.9.9.603 | ciscoThreatMitigationServiceMIB | 3 | 68 | This MIB provides management information about the Threat Mitigation Service(TMS) entity named 'Consumer'. TMS is part of Cisco's… |
| 1.3.6.1.4.1.9.9.604 | cdot1CfmMIB | 3 | 166 | Connectivity Fault Management module for managing IEEE 802.1ag |
| 1.3.6.1.4.1.9.9.606 | ciscoLwappMeshLinkTestMIB | 3 | 46 | ciscoLwappMeshLinkTestMIB MODULE-IDENTITY LAST-UPDATED "200702050000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO "Cisco Sy… |
| 1.3.6.1.4.1.9.9.607 | ciscoDot11HtPhyMIB | 3 | 71 | This MIB is intended to be implemented on Cisco's WLAN devices that provide the wired uplink to wireless clients through the high… |
| 1.3.6.1.4.1.9.9.610 | ciscoLwappRogueMIB | 3 | 78 | This MIB is intended to be implemented on all those devices operating as Central Controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.612 | ciscoLwappDot11MIB | 3 | 17 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.613 | ciscoEvcMIB | 3 | 156 | Metro Ethernet services can support a wide range of applications and subscriber needs easily, efficiently and cost-effectively. … |
| 1.3.6.1.4.1.9.9.614 | ciscoLwappDot11LdapMIB | 3 | 33 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.615 | ciscoLwappRrmMIB | 3 | 28 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.616 | ciscoLwappMeshMIB | 3 | 121 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
| 1.3.6.1.4.1.9.9.617 | ciscoLwappMeshStatsMIB | 4 | 98 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
| 1.3.6.1.4.1.9.9.618 | ciscoLwappSysMIB | 3 | 163 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.619 | ciscoLwappLocalAuthMIB | 3 | 53 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.620 | ciscoLwappMeshBatteryMIB | 3 | 34 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
| 1.3.6.1.4.1.9.9.621 | ciscoH324DialControlMIB | 2 | 34 | This MIB module enhances the IETF Dial Control MIB (RFC2128) by providing H.324 call information over a telephony network. ITU-T R… |
| 1.3.6.1.4.1.9.9.622 | ciscoLwappDot11ClientTsMIB | 3 | 34 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.623 | ciscoLwappCdpMIB | 3 | 51 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
| 1.3.6.1.4.1.9.9.624 | ciscoIpSlaTCMIB | 0 | 0 | This MIB contains textual conventions used by CISCO IPSLA MIBs. Acronyms: FEC: Forward Equivalence Class LPD: Label Path Discovery L… |
| 1.3.6.1.4.1.9.9.626 | ciscoDot11HtMacMIB | 3 | 40 | This MIB is intended to be implemented on Cisco's WLAN devices that provide the wired uplink to wireless clients through the high… |
| 1.3.6.1.4.1.9.9.627 | ciscoDot11RadarMIB | 3 | 25 | This MIB module is for IEEE 802.11a/h Root device, i.e. Access Point (AP) or Root Bridge. This MIB allows dynamic frequency selec… |
| 1.3.6.1.4.1.9.9.628 | ciscoServiceControlSubscribersMIB | 3 | 37 | This MIB provides global and specific information on subscribers managed by a service control entity, which is a network element … |
| 1.3.6.1.4.1.9.9.630 | ciscoTelnetServerMIB | 3 | 34 | MIB module for displaying and configuring Telnet related features in a device. Telnet is a program to log into another computer o… |
| 1.3.6.1.4.1.9.9.631 | ciscoServiceControlLinkMIB | 3 | 21 | This MIB module provides information about the status and configuration of links used by service control entities. The link on a … |
| 1.3.6.1.4.1.9.9.632 | ciscoSmeMIB | 3 | 54 | MIB module to manage Storage Media Encryption (SME) service. SME is an encryption service provided by an encryption node residing… |
| 1.3.6.1.4.1.9.9.633 | ciscoIpSlaAutoMIB | 3 | 57 | This module defines the MIB for IP SLA Automation. IP SLA Automation consists of the following: 1. Use of grouping - Group is an … |
| 1.3.6.1.4.1.9.9.634 | ciscoServiceControlTpStatsMIB | 3 | 39 | This MIB provides information and statistics on the traffic processor(s) of a service control entity, which is a network element … |
| 1.3.6.1.4.1.9.9.635 | ciscoIpSlaJitterMIB | 3 | 57 | This MIB module defines templates for IP SLA operations of UDP Jitter and ICMP Jitter. The UDP Jitter operation is designed to me… |
| 1.3.6.1.4.1.9.9.636 | ciscoIpSlaEchoMIB | 3 | 71 | This MIB module defines the templates for IP SLA operations of ICMP echo, UDP echo and TCP connect. The ICMP echo operation measu… |
| 1.3.6.1.4.1.9.9.637 | ciscoServiceControlRdrMIB | 3 | 56 | This MIB module defines objects describing statistics and configuration relating to the Raw Data Record Formatter running on a se… |
| 1.3.6.1.4.1.9.9.638 | ciscoAgwMIB | 3 | 324 | This module manages Cisco's WiMAX ASN Gateway (ASN-GW). A WiMAX network supports wireless data communication through WiMAX radio … |
| 1.3.6.1.4.1.9.9.639 | ciscoOtnIfMIB | 3 | 137 | This MIB module defines the managed objects for physical layer characteristics of DWDM optical channel interfaces and performanc… |
| 1.3.6.1.4.1.9.9.640 | ciscoImageLicenseMgmtMIB | 3 | 31 | The MIB module for managing the running image level of a Cisco device. Cisco's licensing mechanism provides flexibility to run a … |
| 1.3.6.1.4.1.9.9.642 | ciscoBridgeDomainMIB | 3 | 24 | A bridge domain is one of the means by which it is possible to define a broadcast domain on a bridging device. It is an alternati… |
| 1.3.6.1.4.1.9.9.643 | ciscoTelepresenceMIB | 3 | 119 | The MIB module defines the managed objects for a Telepresence system. Telepresence refers to a set of technologies which allow a p… |
| 1.3.6.1.4.1.9.9.644 | ciscoTelepresenceCallMIB | 3 | 178 | The MIB module defines the managed objects for Telepresence calls. Telepresence refers to a set of technologies which allow a pers… |
| 1.3.6.1.4.1.9.9.645 | ciscoEtherExtMIB | 3 | 18 | The MIB module to describe generic objects for ethernet-like network interfaces. This MIB provides ethernet-like network interfac… |
| 1.3.6.1.4.1.9.9.646 | ciscoAonStatusMIB | 3 | 80 | This MIB module defines managed objects that facilitate the management of AON node. The information available through this MIB in… |
| 1.3.6.1.4.1.9.9.647 | ciscoGgsnExtMIB | 3 | 212 | This MIB module extends the CISCO-GGSN-MIB. This MIB module manages the Gateway GPRS Support Node (GGSN) devices. A GGSN device pr… |
| 1.3.6.1.4.1.9.9.648 | ciscoVirtualInterfaceMIB | 2 | 32 | The MIB module for creation and deletion of Virtual Interfaces and Virtual Interface Groups. In addition to this MIB, interface … |
| 1.3.6.1.4.1.9.9.650 | ciscoL4L7moduleRedundancyMIB | 3 | 71 | The L4-7 SLB devices are used for scaling websites, building web enabled applications, and migrating to web services. The followin… |
| 1.3.6.1.4.1.9.9.651 | ciscoCommonRolesExtMIB | 3 | 37 | A MIB Module for managing the roles that are common between access methods like Command Line Interface (CLI), SNMP and XML interf… |
| 1.3.6.1.4.1.9.9.652 | ciscoSwitchStatsMIB | 3 | 106 | The MIB module provides management information for configuration and monitoring of traffic statistics on Cisco's switching device… |
| 1.3.6.1.4.1.9.9.653 | ciscoAdmissionPolicyMIB | 3 | 36 | This MIB module defines managed objects that facilitate the management of policies upon host(s) admission to a network. The inform… |
| 1.3.6.1.4.1.9.9.654 | ciscoMabMIB | 3 | 20 | MIB module for monitoring and configuring MAC Authentication Bypass (MAB) feature in the system. MAC Auth Bypass feature provides… |
| 1.3.6.1.4.1.9.9.655 | ciscoDigitalMediaSystemsMIB | 3 | 195 | Acronyms and Definitions The following acronyms and terms are used in this document: DMS: Digital Media Systems DAM: Digital As… |
| 1.3.6.1.4.1.9.9.656 | ciscoAuthFrameworkMIB | 3 | 117 | MIB module for Authentication Framework in the system. Authentication Framework provides generic configurations for authenticatio… |
| 1.3.6.1.4.1.9.9.657 | ciscoSbcCallStatsMIB | 3 | 201 | The main purpose of this MIB is to define the statistics information for Session Border Controller application. The statistics ar… |
| 1.3.6.1.4.1.9.9.658 | ciscoSessBorderCtrlrEventMIB | 3 | 208 | The main purpose of this MIB is to define the SNMP notifications and alarms generated by Session Border Controller application an… |
| 1.3.6.1.4.1.9.9.660 | ciscoNportVirtualizationMIB | 3 | 19 | The MIB module for the management of N_port Virtualization or NPV within the framework of Cisco's N_port virtualization (NPV) Arc… |
| 1.3.6.1.4.1.9.9.661 | ciscoWan3gMIB | 3 | 378 | This MIB module provides network management support for Cisco cellular 3G WAN products. *** ABBREVIATIONS, ACRONYMS, AND SYMBOLS … |
| ... | ||||