This MIB is intended to be implemented on all those
devices operating as Central Controllers (CC) that
terminate the Light Weight Access Point Protocol
tunnel from Light-weight LWAPP Access Points.
This MIB provides configuration and status information
about CDP neighbors of LWAPP APs. The MIB provides
configuration of CDP feature on the LWAPP Access Points.
The MIB can also be used to retrive the status of the
CDP cache information on the various LWAPP LWAPP Access
Points.
The CDP MIB is also supported by Controller and provides
configuration and status information about CDP neighbours
of the controller.
The relationship between CC and the LWAPP APs
can be depicted as follows:
+......+ +......+ +......+ +......+
+ + + + + + + +
+ CC + + CC + + CC + + CC +
+ + + + + + + +
+......+ +......+ +......+ +......+
.. . . .
.. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ AP + + AP + + AP + + AP + + AP +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ MN + + MN + + MN + + MN + + MN +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
The LWAPP tunnel exists between the controller and
the APs. The MNs communicate with the APs through
the protocol defined by the 802.11 standard.
LWAPP APs, upon bootup, discover and join one of the
controllers and the controller pushes the configuration,
that includes the WLAN parameters, to the LWAPP APs.
The APs then encapsulate all the 802.11 frames from
wireless clients inside LWAPP frames and forward
the LWAPP frames to the controller.
GLOSSARY
Access Point ( AP )
An entity that contains an 802.11 medium access
control ( MAC ) and physical layer ( PHY ) interface
and provides access to the distribution services via
the wireless medium for associated clients.
LWAPP APs encapsulate all the 802.11 frames in
LWAPP frames and sends it to the controller to which
it is logically connected.
Basic Service Set Identifier (BSSID)
The identifier for the service set comprising of
all the 802.11 stations under the control of
one coordinating Access Point. This identifier
happens to be the MAC address of the dot11 radio
interface of the Access Point. The wireless
clients that associate with the Access Point
get the wired uplink through this particular
dot11 interface.
Central Controller ( CC )
The central entity that terminates the LWAPP protocol
tunnel from the LWAPP APs. Throughout this MIB,
this entity also referred to as 'controller'.
Light Weight Access Point Protocol ( LWAPP )
This is a generic protocol that defines the
communication between the Access Points and the
Central Controller.
Cisco Discovery Protocol ( CDP )
Protocol for discovery of neighboring devices.
REFERENCE
[1] Part 11 Wireless LAN Medium Access Control ( MAC )
and Physical Layer ( PHY ) Specifications.
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
Weight Access Point Protocol.
Parsed from file CISCO-LWAPP-CDP-MIB.mib
Module: CISCO-LWAPP-CDP-MIB
This MIB is intended to be implemented on all those
devices operating as Central Controllers (CC) that
terminate the Light Weight Access Point Protocol
tunnel from Light-weight LWAPP Access Points.
This MIB provides configuration and status information
about CDP neighbors of LWAPP APs. The MIB provides
configuration of CDP feature on the LWAPP Access Points.
The MIB can also be used to retrive the status of the
CDP cache information on the various LWAPP LWAPP Access
Points.
The CDP MIB is also supported by Controller and provides
configuration and status information about CDP neighbours
of the controller.
The relationship between CC and the LWAPP APs
can be depicted as follows:
+......+ +......+ +......+ +......+
+ + + + + + + +
+ CC + + CC + + CC + + CC +
+ + + + + + + +
+......+ +......+ +......+ +......+
.. . . .
.. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ AP + + AP + + AP + + AP + + AP +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ MN + + MN + + MN + + MN + + MN +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
The LWAPP tunnel exists between the controller and
the APs. The MNs communicate with the APs through
the protocol defined by the 802.11 standard.
LWAPP APs, upon bootup, discover and join one of the
controllers and the controller pushes the configuration,
that includes the WLAN parameters, to the LWAPP APs.
The APs then encapsulate all the 802.11 frames from
wireless clients inside LWAPP frames and forward
the LWAPP frames to the controller.
GLOSSARY
Access Point ( AP )
An entity that contains an 802.11 medium access
control ( MAC ) and physical layer ( PHY ) interface
and provides access to the distribution services via
the wireless medium for associated clients.
LWAPP APs encapsulate all the 802.11 frames in
LWAPP frames and sends it to the controller to which
it is logically connected.
Basic Service Set Identifier (BSSID)
The identifier for the service set comprising of
all the 802.11 stations under the control of
one coordinating Access Point. This identifier
happens to be the MAC address of the dot11 radio
interface of the Access Point. The wireless
clients that associate with the Access Point
get the wired uplink through this particular
dot11 interface.
Central Controller ( CC )
The central entity that terminates the LWAPP protocol
tunnel from the LWAPP APs. Throughout this MIB,
this entity also referred to as 'controller'.
Light Weight Access Point Protocol ( LWAPP )
This is a generic protocol that defines the
communication between the Access Points and the
Central Controller.
Cisco Discovery Protocol ( CDP )
Protocol for discovery of neighboring devices.
REFERENCE
[1] Part 11 Wireless LAN Medium Access Control ( MAC )
and Physical Layer ( PHY ) Specifications.
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
Weight Access Point Protocol.
Parsed from file CISCO-LWAPP-CDP-MIB.my.txt
Company: None
Module: CISCO-LWAPP-CDP-MIB
This MIB is intended to be implemented on all those
devices operating as Central Controllers (CC) that
terminate the Light Weight Access Point Protocol
tunnel from Light-weight LWAPP Access Points.
This MIB provides configuration and status information
about CDP neighbors of LWAPP APs. The MIB provides
configuration of CDP feature on the LWAPP Access Points.
The MIB can also be used to retrive the status of the
CDP cache information on the various LWAPP LWAPP Access
Points.
The CDP MIB is also supported by Controller and provides
configuration and status information about CDP neighbours
of the controller.
The relationship between CC and the LWAPP APs
can be depicted as follows:
+......+ +......+ +......+ +......+
+ + + + + + + +
+ CC + + CC + + CC + + CC +
+ + + + + + + +
+......+ +......+ +......+ +......+
.. . . .
.. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ AP + + AP + + AP + + AP + + AP +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ MN + + MN + + MN + + MN + + MN +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
The LWAPP tunnel exists between the controller and
the APs. The MNs communicate with the APs through
the protocol defined by the 802.11 standard.
LWAPP APs, upon bootup, discover and join one of the
controllers and the controller pushes the configuration,
that includes the WLAN parameters, to the LWAPP APs.
The APs then encapsulate all the 802.11 frames from
wireless clients inside LWAPP frames and forward
the LWAPP frames to the controller.
GLOSSARY
Access Point ( AP )
An entity that contains an 802.11 medium access
control ( MAC ) and physical layer ( PHY ) interface
and provides access to the distribution services via
the wireless medium for associated clients.
LWAPP APs encapsulate all the 802.11 frames in
LWAPP frames and sends it to the controller to which
it is logically connected.
Basic Service Set Identifier (BSSID)
The identifier for the service set comprising of
all the 802.11 stations under the control of
one coordinating Access Point. This identifier
happens to be the MAC address of the dot11 radio
interface of the Access Point. The wireless
clients that associate with the Access Point
get the wired uplink through this particular
dot11 interface.
Central Controller ( CC )
The central entity that terminates the LWAPP protocol
tunnel from the LWAPP APs. Throughout this MIB,
this entity also referred to as 'controller'.
Light Weight Access Point Protocol ( LWAPP )
This is a generic protocol that defines the
communication between the Access Points and the
Central Controller.
Cisco Discovery Protocol ( CDP )
Protocol for discovery of neighboring devices.
REFERENCE
[1] Part 11 Wireless LAN Medium Access Control ( MAC )
and Physical Layer ( PHY ) Specifications.
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
Weight Access Point Protocol.
ciscoLwappCdpMIB MODULE-IDENTITY LAST-UPDATED "200703280000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO "Cisco Systems, Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS Email: [email protected]" DESCRIPTION "This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel from Light-weight LWAPP Access Points. This MIB provides configuration and status information about CDP neighbors of LWAPP APs. The MIB provides configuration of CDP feature on the LWAPP Access Points. The MIB can also be used to retrive the status of the CDP cache information on the various LWAPP LWAPP Access Points. The CDP MIB is also supported by Controller and provides configuration and status information about CDP neighbours of the controller. The relationship between CC and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ +......+ + + + + + + + + + CC + + CC + + CC + + CC + + + + + + + + + +......+ +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + AP + + AP + + AP + + AP + + AP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + MN + + MN + + MN + + MN + + MN + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends it to the controller to which it is logically connected. Basic Service Set Identifier (BSSID) The identifier for the service set comprising of all the 802.11 stations under the control of one coordinating Access Point. This identifier happens to be the MAC address of the dot11 radio interface of the Access Point. The wireless clients that associate with the Access Point get the wired uplink through this particular dot11 interface. Central Controller ( CC ) The central entity that terminates the LWAPP protocol tunnel from the LWAPP APs. Throughout this MIB, this entity also referred to as 'controller'. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the Central Controller. Cisco Discovery Protocol ( CDP ) Protocol for discovery of neighboring devices. REFERENCE [1] Part 11 Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications. [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol." REVISION "200703280000Z" DESCRIPTION "This is the initial version of this module." ::= { ciscoMgmt 623 }
ciscoLwappCdpMIB OBJECT IDENTIFIER ::= { ciscoMgmt 623 }
Vendor: Cisco
Module: CISCO-LWAPP-CDP-MIB
[Automatically extracted from oidview.com]
ciscoLwappCdpMIB MODULE-IDENTITY LAST-UPDATED "200703280000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO "Cisco Systems, Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS Email: [email protected]" DESCRIPTION "This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel from Light-weight LWAPP Access Points. This MIB provides configuration and status information about CDP neighbors of LWAPP APs. The MIB provides configuration of CDP feature on the LWAPP Access Points. The MIB can also be used to retrive the status of the CDP cache information on the various LWAPP LWAPP Access Points. The CDP MIB is also supported by Controller and provides configuration and status information about CDP neighbours of the controller. The relationship between CC and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ +......+ + + + + + + + + + CC + + CC + + CC + + CC + + + + + + + + + +......+ +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + AP + + AP + + AP + + AP + + AP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + MN + + MN + + MN + + MN + + MN + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends it to the controller to which it is logically connected. Basic Service Set Identifier (BSSID) The identifier for the service set comprising of all the 802.11 stations under the control of one coordinating Access Point. This identifier happens to be the MAC address of the dot11 radio interface of the Access Point. The wireless clients that associate with the Access Point get the wired uplink through this particular dot11 interface. Central Controller ( CC ) The central entity that terminates the LWAPP protocol tunnel from the LWAPP APs. Throughout this MIB, this entity also referred to as 'controller'. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the Central Controller. Cisco Discovery Protocol ( CDP ) Protocol for discovery of neighboring devices. REFERENCE [1] Part 11 Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications. [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol." REVISION "200703280000Z" DESCRIPTION "This is the initial version of this module." ::= { ciscoMgmt 623 }
ciscoLwappCdpMIB MODULE-IDENTITY LAST-UPDATED "200911230000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO "Cisco Systems, Customer Service Postal: 170 West Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS Email: [email protected]" DESCRIPTION "This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel from Light-weight LWAPP Access Points. This MIB provides configuration and status information about CDP neighbors of LWAPP APs. The MIB provides configuration of CDP feature on the LWAPP Access Points. The MIB can also be used to retrive the status of the CDP cache information on the various LWAPP LWAPP Access Points. The CDP MIB is also supported by Controller and provides configuration and status information about CDP neighbours of the controller. The relationship between CC and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ +......+ + + + + + + + + + CC + + CC + + CC + + CC + + + + + + + + + +......+ +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + AP + + AP + + AP + + AP + + AP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + MN + + MN + + MN + + MN + + MN + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends it to the controller to which it is logically connected. Basic Service Set Identifier (BSSID) The identifier for the service set comprising of all the 802.11 stations under the control of one coordinating Access Point. This identifier happens to be the MAC address of the dot11 radio interface of the Access Point. The wireless clients that associate with the Access Point get the wired uplink through this particular dot11 interface. Central Controller ( CC ) The central entity that terminates the LWAPP protocol tunnel from the LWAPP APs. Throughout this MIB, this entity also referred to as 'controller'. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the Central Controller. Cisco Discovery Protocol ( CDP ) Protocol for discovery of neighboring devices. REFERENCE [1] Part 11 Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications. [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol." REVISION "200911230000Z" DESCRIPTION "Added the variables clcCdpApCacheDuplex and clcCdpApCacheInterfaceSpeed to clcCdpApCacheTable." REVISION "200703280000Z" DESCRIPTION "This is the initial version of this module." ::= { ciscoMgmt 623 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.623.0 | ciscoLwappCdpMIBNotifs | 0 | 0 | None |
| 1.3.6.1.4.1.9.9.623.1 | ciscoLwappCdpMIBObjects | 4 | 41 | None |
| 1.3.6.1.4.1.9.9.623.2 | ciscoLwappCdpMIBConform | 2 | 7 | None |
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.9.9.573 | ciscoQosTcMIB | 0 | 0 | This module defines the textual conventions used within Cisco Qos MIBs. |
| 1.3.6.1.4.1.9.9.576 | ciscoLwappMobilityMIB | 3 | 60 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
| 1.3.6.1.4.1.9.9.577 | ciscoLwappAclMIB | 3 | 26 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
| 1.3.6.1.4.1.9.9.578 | ciscoRoutePoliciesMIB | 3 | 5 | This module provides a subtree to define OIDs so that various routing 'policies' used by Cisco routers can be expressed. This mod… |
| 1.3.6.1.4.1.9.9.580 | ciscoSwitchQosMIB | 3 | 295 | This MIB module extends the CISCO-CLASS-BASED-QOS-MIB by defining configuration and statistics information specific to the qualit… |
| 1.3.6.1.4.1.9.9.583 | ciscoGslbTcMIB | 0 | 0 | This MIB module defines Textual Conventions and OBJECT-IDENTITIES for use in documents defining management information base (MIBs… |
| 1.3.6.1.4.1.9.9.584 | ciscoEntityDiagTcMIB | 0 | 0 | This module defines the textual conventions used within Cisco Entity Diag MIB. |
| 1.3.6.1.4.1.9.9.585 | ciscoIpSlaEthernetMIB | 3 | 194 | This MIB module consists of two parts. 1) Auto-Ethernet-CFM Control: | | 2) ethernetJitter Stats: | | The first part defines a mechani… |
| 1.3.6.1.4.1.9.9.586 | ciscoNotificationControlMIB | 2 | 28 | This MIB provides network management support to regulate the transmission of notifications generated by a system providing networ… |
| 1.3.6.1.4.1.9.9.589 | ciscoGslbSystemMIB | 3 | 103 | This MIB module defines objects for network and system information of Global Server Load Balancer(GSLB) as a network device. A G… |
| 1.3.6.1.4.1.9.9.590 | ciscoCvpMIB | 3 | 255 | The Cisco Unified Customer Voice Portal (CVP) application integrates with both traditional time-division multiplexing (TDM) and I… |
| 1.3.6.1.4.1.9.9.592 | ciscoPrefPathMIB | 3 | 56 | The MIB module for the management of preferred path. This MIB enables managers to configure and monitor Preferred Path parameters.… |
| 1.3.6.1.4.1.9.9.593 | ciscoFcSdvMIB | 3 | 28 | This MIB instrumentation is for managing Fibre Channel (FC) SAN Device Virtualization (SDV) solution on Cisco Fibre Channel devic… |
| 1.3.6.1.4.1.9.9.594 | ciscoApplicationAccelerationMIB | 3 | 37 | This is a MIB for managing Application Acceleration System(s). This MIB includes instrumentation for providing the performance st… |
| 1.3.6.1.4.1.9.9.595 | ciscoGslbDnsMIB | 3 | 165 | The MIB defines objects for status and statistics information of DNS related operations of Global Server Load Balancer(GSLB). Th… |
| 1.3.6.1.4.1.9.9.597 | ciscoContentServicesMIB | 3 | 349 | Content Service is a capability to examine IP/TCP/UDP headers, payload and enable billing based on the content being provided. Ab… |
| 1.3.6.1.4.1.9.9.598 | ciscoLwappAAAMIB | 3 | 73 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC), that terminate the Light Weigh… |
| 1.3.6.1.4.1.9.9.599 | ciscoLwappDot11ClientMIB | 4 | 49 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.600 | ciscoGslbHealthMonMIB | 3 | 90 | The MIB defines objects related to global keepalive properties in GSLB devices. It contains the tables for keep alive configurat… |
| 1.3.6.1.4.1.9.9.601 | ciscoResilientEthernetProtocolMIB | 3 | 77 | This MIB module defines objects required for managing Resilient Ethernet Protocol (REP). Resilient Ethernet Protocol (REP) is a C… |
| 1.3.6.1.4.1.9.9.602 | ciscoPacketCaptureMIB | 3 | 103 | The MIB module for the management of packet capture feature. |
| 1.3.6.1.4.1.9.9.603 | ciscoThreatMitigationServiceMIB | 3 | 68 | This MIB provides management information about the Threat Mitigation Service(TMS) entity named 'Consumer'. TMS is part of Cisco's… |
| 1.3.6.1.4.1.9.9.604 | cdot1CfmMIB | 3 | 166 | Connectivity Fault Management module for managing IEEE 802.1ag |
| 1.3.6.1.4.1.9.9.606 | ciscoLwappMeshLinkTestMIB | 3 | 46 | ciscoLwappMeshLinkTestMIB MODULE-IDENTITY LAST-UPDATED "200702050000Z" ORGANIZATION "Cisco Systems Inc." CONTACT-INFO "Cisco Sy… |
| 1.3.6.1.4.1.9.9.607 | ciscoDot11HtPhyMIB | 3 | 71 | This MIB is intended to be implemented on Cisco's WLAN devices that provide the wired uplink to wireless clients through the high… |
| 1.3.6.1.4.1.9.9.610 | ciscoLwappRogueMIB | 3 | 78 | This MIB is intended to be implemented on all those devices operating as Central Controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.611 | ciscoLwappDot11ClientCCXTextualConventions | 0 | 0 | This module defines the textual conventions used throughout the Cisco enterprise MIBs designed for implementation on Central Cont… |
| 1.3.6.1.4.1.9.9.612 | ciscoLwappDot11MIB | 3 | 17 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.613 | ciscoEvcMIB | 3 | 156 | Metro Ethernet services can support a wide range of applications and subscriber needs easily, efficiently and cost-effectively. … |
| 1.3.6.1.4.1.9.9.614 | ciscoLwappDot11LdapMIB | 3 | 33 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.615 | ciscoLwappRrmMIB | 3 | 28 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.616 | ciscoLwappMeshMIB | 3 | 121 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
| 1.3.6.1.4.1.9.9.617 | ciscoLwappMeshStatsMIB | 4 | 98 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
| 1.3.6.1.4.1.9.9.618 | ciscoLwappSysMIB | 3 | 163 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.619 | ciscoLwappLocalAuthMIB | 3 | 53 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.620 | ciscoLwappMeshBatteryMIB | 3 | 34 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight… |
| 1.3.6.1.4.1.9.9.621 | ciscoH324DialControlMIB | 2 | 34 | This MIB module enhances the IETF Dial Control MIB (RFC2128) by providing H.324 call information over a telephony network. ITU-T R… |
| 1.3.6.1.4.1.9.9.622 | ciscoLwappDot11ClientTsMIB | 3 | 34 | This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Acc… |
| 1.3.6.1.4.1.9.9.624 | ciscoIpSlaTCMIB | 0 | 0 | This MIB contains textual conventions used by CISCO IPSLA MIBs. Acronyms: FEC: Forward Equivalence Class LPD: Label Path Discovery L… |
| 1.3.6.1.4.1.9.9.626 | ciscoDot11HtMacMIB | 3 | 40 | This MIB is intended to be implemented on Cisco's WLAN devices that provide the wired uplink to wireless clients through the high… |
| 1.3.6.1.4.1.9.9.627 | ciscoDot11RadarMIB | 3 | 25 | This MIB module is for IEEE 802.11a/h Root device, i.e. Access Point (AP) or Root Bridge. This MIB allows dynamic frequency selec… |
| 1.3.6.1.4.1.9.9.628 | ciscoServiceControlSubscribersMIB | 3 | 37 | This MIB provides global and specific information on subscribers managed by a service control entity, which is a network element … |
| 1.3.6.1.4.1.9.9.630 | ciscoTelnetServerMIB | 3 | 34 | MIB module for displaying and configuring Telnet related features in a device. Telnet is a program to log into another computer o… |
| 1.3.6.1.4.1.9.9.631 | ciscoServiceControlLinkMIB | 3 | 21 | This MIB module provides information about the status and configuration of links used by service control entities. The link on a … |
| 1.3.6.1.4.1.9.9.632 | ciscoSmeMIB | 3 | 54 | MIB module to manage Storage Media Encryption (SME) service. SME is an encryption service provided by an encryption node residing… |
| 1.3.6.1.4.1.9.9.633 | ciscoIpSlaAutoMIB | 3 | 57 | This module defines the MIB for IP SLA Automation. IP SLA Automation consists of the following: 1. Use of grouping - Group is an … |
| 1.3.6.1.4.1.9.9.634 | ciscoServiceControlTpStatsMIB | 3 | 39 | This MIB provides information and statistics on the traffic processor(s) of a service control entity, which is a network element … |
| 1.3.6.1.4.1.9.9.635 | ciscoIpSlaJitterMIB | 3 | 57 | This MIB module defines templates for IP SLA operations of UDP Jitter and ICMP Jitter. The UDP Jitter operation is designed to me… |
| 1.3.6.1.4.1.9.9.636 | ciscoIpSlaEchoMIB | 3 | 71 | This MIB module defines the templates for IP SLA operations of ICMP echo, UDP echo and TCP connect. The ICMP echo operation measu… |
| 1.3.6.1.4.1.9.9.637 | ciscoServiceControlRdrMIB | 3 | 56 | This MIB module defines objects describing statistics and configuration relating to the Raw Data Record Formatter running on a se… |
| 1.3.6.1.4.1.9.9.638 | ciscoAgwMIB | 3 | 324 | This module manages Cisco's WiMAX ASN Gateway (ASN-GW). A WiMAX network supports wireless data communication through WiMAX radio … |
| 1.3.6.1.4.1.9.9.639 | ciscoOtnIfMIB | 3 | 137 | This MIB module defines the managed objects for physical layer characteristics of DWDM optical channel interfaces and performanc… |
| 1.3.6.1.4.1.9.9.640 | ciscoImageLicenseMgmtMIB | 3 | 31 | The MIB module for managing the running image level of a Cisco device. Cisco's licensing mechanism provides flexibility to run a … |
| 1.3.6.1.4.1.9.9.642 | ciscoBridgeDomainMIB | 3 | 24 | A bridge domain is one of the means by which it is possible to define a broadcast domain on a bridging device. It is an alternati… |
| 1.3.6.1.4.1.9.9.643 | ciscoTelepresenceMIB | 3 | 119 | The MIB module defines the managed objects for a Telepresence system. Telepresence refers to a set of technologies which allow a p… |
| 1.3.6.1.4.1.9.9.644 | ciscoTelepresenceCallMIB | 3 | 178 | The MIB module defines the managed objects for Telepresence calls. Telepresence refers to a set of technologies which allow a pers… |
| 1.3.6.1.4.1.9.9.645 | ciscoEtherExtMIB | 3 | 18 | The MIB module to describe generic objects for ethernet-like network interfaces. This MIB provides ethernet-like network interfac… |
| 1.3.6.1.4.1.9.9.646 | ciscoAonStatusMIB | 3 | 80 | This MIB module defines managed objects that facilitate the management of AON node. The information available through this MIB in… |
| 1.3.6.1.4.1.9.9.647 | ciscoGgsnExtMIB | 3 | 212 | This MIB module extends the CISCO-GGSN-MIB. This MIB module manages the Gateway GPRS Support Node (GGSN) devices. A GGSN device pr… |
| 1.3.6.1.4.1.9.9.648 | ciscoVirtualInterfaceMIB | 2 | 32 | The MIB module for creation and deletion of Virtual Interfaces and Virtual Interface Groups. In addition to this MIB, interface … |
| 1.3.6.1.4.1.9.9.650 | ciscoL4L7moduleRedundancyMIB | 3 | 71 | The L4-7 SLB devices are used for scaling websites, building web enabled applications, and migrating to web services. The followin… |
| 1.3.6.1.4.1.9.9.651 | ciscoCommonRolesExtMIB | 3 | 37 | A MIB Module for managing the roles that are common between access methods like Command Line Interface (CLI), SNMP and XML interf… |
| 1.3.6.1.4.1.9.9.652 | ciscoSwitchStatsMIB | 3 | 106 | The MIB module provides management information for configuration and monitoring of traffic statistics on Cisco's switching device… |
| 1.3.6.1.4.1.9.9.653 | ciscoAdmissionPolicyMIB | 3 | 36 | This MIB module defines managed objects that facilitate the management of policies upon host(s) admission to a network. The inform… |
| 1.3.6.1.4.1.9.9.654 | ciscoMabMIB | 3 | 20 | MIB module for monitoring and configuring MAC Authentication Bypass (MAB) feature in the system. MAC Auth Bypass feature provides… |
| 1.3.6.1.4.1.9.9.655 | ciscoDigitalMediaSystemsMIB | 3 | 195 | Acronyms and Definitions The following acronyms and terms are used in this document: DMS: Digital Media Systems DAM: Digital As… |
| 1.3.6.1.4.1.9.9.656 | ciscoAuthFrameworkMIB | 3 | 117 | MIB module for Authentication Framework in the system. Authentication Framework provides generic configurations for authenticatio… |
| 1.3.6.1.4.1.9.9.657 | ciscoSbcCallStatsMIB | 3 | 201 | The main purpose of this MIB is to define the statistics information for Session Border Controller application. The statistics ar… |
| 1.3.6.1.4.1.9.9.658 | ciscoSessBorderCtrlrEventMIB | 3 | 208 | The main purpose of this MIB is to define the SNMP notifications and alarms generated by Session Border Controller application an… |
| 1.3.6.1.4.1.9.9.660 | ciscoNportVirtualizationMIB | 3 | 19 | The MIB module for the management of N_port Virtualization or NPV within the framework of Cisco's N_port virtualization (NPV) Arc… |
| 1.3.6.1.4.1.9.9.661 | ciscoWan3gMIB | 3 | 378 | This MIB module provides network management support for Cisco cellular 3G WAN products. *** ABBREVIATIONS, ACRONYMS, AND SYMBOLS … |
| 1.3.6.1.4.1.9.9.662 | ciscoCbpTcMIB | 0 | 0 | This MIB module defines textual conventions used by the CISCO-CBP-BASE-CFG-MIB, CISCO-CBP-BASE-MON-MIB, and any MIB modules exten… |
| 1.3.6.1.4.1.9.9.663 | ciscoSwitchHardwareCapacityMIB | 3 | 141 | This MIB module defines the managed objects for hardware capacity of Cisco switching devices. The hardware capacity information c… |
| 1.3.6.1.4.1.9.9.664 | ciscoMmodalContactAppsMIB | 3 | 359 | The Cisco Unified Multi-Modal Contact Applications (MMCA) platform is a highly scalable, modular, extensible, open and secure pl… |
| 1.3.6.1.4.1.9.9.667 | ciscoServiceControllerMIB | 2 | 31 | This MIB module defines objects describing traffic controllers used by a service control entity. A service control entity is a ne… |
| 1.3.6.1.4.1.9.9.668 | ciscoP2PIfMIB | 3 | 16 | The Point to Point Interface MIB module. This MIB manages the generic objects for Serial link or SONET/SDH like point to point ne… |
| 1.3.6.1.4.1.9.9.669 | ciscoCdmaPdsnExtMIB | 3 | 178 | This MIB is an extension to the CISCO-CDMA-PDSN-MIB. A CDMA network supports wireless data communication through 3G CDMA radio acc… |
| 1.3.6.1.4.1.9.9.670 | ciscoReportIntervalTcMIB | 0 | 0 | CISCO-REPORT-INTERVAL-TC-MIB |
| 1.3.6.1.4.1.9.9.672 | ciscoMobilityTapMIB | 3 | 24 | This module manages Cisco's intercept feature for Mobility Gateway Products. This MIB is used along with CISCO-TAP2-MIB MIB to int… |
| 1.3.6.1.4.1.9.9.673 | ciscoFCoEMIB | 2 | 45 | This MIB module is for configuring and monitoring Fibre Channel over Ethernet (FCoE) related entities. This MIB defines the Virtu… |
| ... | ||||