Status in source: mandatory.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"unitTimeSourceStatus",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"notActive",
"(",
"1",
")",
",",
"active",
"(",
"2",
")",
",",
"dataError",
"(",
"3",
")",
",",
"dataTimeOutError",
"(",
"4",
")",
",",
"pendingUpdate",
"(",
"5",
")",
",",
"nonSequential",
"(",
"6",
")",
"}",
"ACCESS",
"read-only",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"<Definition> An enumerated value representing the status of the current unit clock source (unitTimeSourceCurrent). notActive: The unit is not monitoring this clock source, or updates are not available. active: The unit is receiving valid updates and is updating the controller time without errors. dataError: A data error, such as a crc mismatch, was detected. dataTimeoutError: No data has been received from the unitTimeSourceCurrent within a reasonable amount of time. This timeout will be preset by the driver for this time source as it depends on the specific implementation. pendingUpdate: The unit is pending an update from the unitTimeSourceCurrent, such as when the controller is in the startup period and is waiting for the external device to sync to its reference and send the time to the unit. nonSequential: A non-sequential clock change occurrence. Note this value should be cleared upon reading it (i.e., a GET on this object) or 10 seconds after its occurrence, whichever comes first. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.3.22.5 <Object Type> S\"",
"::=",
"{",
"ascClock",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"notActive",
1
],
[
"active",
2
],
[
"dataError",
3
],
[
"dataTimeOutError",
4
],
[
"pendingUpdate",
5
],
[
"nonSequential",
6
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"<Definition> An enumerated value representing the status of the current unit clock source (unitTimeSourceCurrent). notActive: The unit is not monitoring this clock source, or updates are not available. active: The unit is receiving valid updates and is updating the controller time without errors. dataError: A data error, such as a crc mismatch, was detected. dataTimeoutError: No data has been received from the unitTimeSourceCurrent within a reasonable amount of time. This timeout will be preset by the driver for this time source as it depends on the specific implementation. pendingUpdate: The unit is pending an update from the unitTimeSourceCurrent, such as when the controller is in the startup period and is waiting for the external device to sync to its reference and send the time to the unit. nonSequential: A non-sequential clock change occurrence. Note this value should be cleared upon reading it (i.e., a GET on this object) or 10 seconds after its occurrence, whichever comes first. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.3.22.5 <Object Type> S"
],
null,
null,
null,
null
]
}