Status in source: mandatory.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"unitTimeNonSequentialSource",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"unknown",
"(",
"1",
")",
",",
"dstChange",
"(",
"2",
")",
",",
"managementStation",
"(",
"3",
")",
",",
"localUser",
"(",
"4",
")",
",",
"timeSourceChange",
"(",
"5",
")",
",",
"timeSourceDiscontinuity",
"(",
"6",
")",
"}",
"ACCESS",
"read-only",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"<Definition> An enumerated value that indicates the source of a non-sequential change to the ASC clock time. A non- sequential change occurs anytime the clock changes by more than 1 increment (whether in seconds or milliseconds). unknown: the source of the non-sequential change to the unit time is unknown or cannot be determined. dstChange: the source of the non-sequential change to the unit time is a change in daytime savings time. managementStation: the source of the non-sequential change to the unit time is a command from a management station. localUser: the source of the non-sequential change to the unit time is a command from a user or device at the controller unit. timeSourceChange: A change in the time source (e.g., external1) timeSourceDiscontinuity: A change as determined by an external time source (e.g., GNSS). The value is latched until another non-sequential change to the ASC clock time or until the ASC is powered off. If a non-sequential change occurs or globalTime is SET, then the event should be logged. This object is used with the unitTimeNonSequentialChange and the unitTimeNonSequentialDelta objects. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.3.22.6 <Object Type> S\"",
"DEFVAL",
"{",
"unknown",
"}",
"::=",
"{",
"ascClock",
"6",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"unknown",
1
],
[
"dstChange",
2
],
[
"managementStation",
3
],
[
"localUser",
4
],
[
"timeSourceChange",
5
],
[
"timeSourceDiscontinuity",
6
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"<Definition> An enumerated value that indicates the source of a non-sequential change to the ASC clock time. A non- sequential change occurs anytime the clock changes by more than 1 increment (whether in seconds or milliseconds). unknown: the source of the non-sequential change to the unit time is unknown or cannot be determined. dstChange: the source of the non-sequential change to the unit time is a change in daytime savings time. managementStation: the source of the non-sequential change to the unit time is a command from a management station. localUser: the source of the non-sequential change to the unit time is a command from a user or device at the controller unit. timeSourceChange: A change in the time source (e.g., external1) timeSourceDiscontinuity: A change as determined by an external time source (e.g., GNSS). The value is latched until another non-sequential change to the ASC clock time or until the ASC is powered off. If a non-sequential change occurs or globalTime is SET, then the event should be logged. This object is used with the unitTimeNonSequentialChange and the unitTimeNonSequentialDelta objects. <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.3.22.6 <Object Type> S"
],
null,
null,
null,
[
"DEFVAL",
"unknown"
]
]
}