OID reference
1.3.6.1.4.1.1206.4.2.1.3.22.7
<Definition> The 'new' globalTime after a non-sequential change to the ASC clock time. A non-sequential change occurs anytime the clock changes by more than 1 increment (whether in seconds or milliseconds). The value of this object is number of seconds since the epoch of 00:00:00 (midnight) January 1, 1970 UTC (a.k.a.…
Identification
{1 3 6 1 4 1 1206 4 2 1 3 22 7}
A counter is cumulative. To estimate a rate, subtract two readings and divide by the elapsed time; use the units stated in the MIB.
Counter values can wrap or reset. A decrease alone does not distinguish a wrap from a reset, and multiple wraps between readings cannot be recovered reliably. Check the device's discontinuity indicators when available.
Published counter width: 32 bits. SMIv2: Counter32 · Counter64
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.1206.4.2.1.3.22.7.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
unitTimeNonSequentialChange OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "<Definition> The 'new' globalTime after a non-sequential
change to the ASC clock time. A non-sequential change occurs
anytime the clock changes by more than 1 increment (whether in
seconds or milliseconds). The value of this object is number of
seconds since the epoch of 00:00:00 (midnight) January 1, 1970
UTC (a.k.a. Zulu or GMT).
<Object Identifier> 1.3.6.1.4.1.1206.4.2.1.3.22.7
<Unit> second"
DEFVAL { 0 }
::= { ascClock 7 }unitTimeNonSequentialChange OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION "<Definition> The 'new' globalTime after a non-sequential
change to the ASC clock time. A non-sequential change occurs
anytime the clock changes by more than 1 increment (whether in
seconds or milliseconds). The value of this object is number of
seconds since the epoch of 00:00:00 (midnight) January 1, 1970
UTC (a.k.a. Zulu or GMT).
<Object Identifier> 1.3.6.1.4.1.1206.4.2.1.3.22.7
<Object Type> S
<Unit> second"
DEFVAL { 0 }
::= { ascClock 7 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
<Definition> The 'new' globalTime after a non-sequential change to the ASC clock time. A non-sequential change occurs anytime the clock changes by more than 1 increment (whether in seconds or milliseconds). The value of this object is number of seconds since the epoch of 00:00:00 (midnight) January 1, 1970 UTC (a.k.a. Zulu or GMT). <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.3.22.7 <Unit> second
NTCIP published standard MIB annexes (reviewed modules)
Description 2
<Definition> The 'new' globalTime after a non-sequential change to the ASC clock time. A non-sequential change occurs anytime the clock changes by more than 1 increment (whether in seconds or milliseconds). The value of this object is number of seconds since the epoch of 00:00:00 (midnight) January 1, 1970 UTC (a.k.a. Zulu or GMT). <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.3.22.7 <Object Type> S <Unit> second
NTCIP published standard MIB annexes (reviewed modules)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: mandatory.
Names: unitTimeNonSequentialChange
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"unitTimeNonSequentialChange",
"OBJECT-TYPE",
"SYNTAX",
"Counter",
"ACCESS",
"read-only",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"<Definition> The 'new' globalTime after a non-sequential change to the ASC clock time. A non-sequential change occurs anytime the clock changes by more than 1 increment (whether in seconds or milliseconds). The value of this object is number of seconds since the epoch of 00:00:00 (midnight) January 1, 1970 UTC (a.k.a. Zulu or GMT). <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.3.22.7 <Unit> second\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"ascClock",
"7",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"<Definition> The 'new' globalTime after a non-sequential change to the ASC clock time. A non-sequential change occurs anytime the clock changes by more than 1 increment (whether in seconds or milliseconds). The value of this object is number of seconds since the epoch of 00:00:00 (midnight) January 1, 1970 UTC (a.k.a. Zulu or GMT). <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.3.22.7 <Unit> second"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Module: NTCIP1202-v03
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['IpAddress', 'Counter', 'null'], 'RFC1213-MIB': ['DisplayString', 'ifIndex'], 'NTCIP8004v02': ['OwnerString', 'OerString', 'devices']}Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.
Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.
Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: NTCIP8004v02. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.
· Download NTCIP-1202v0328A.pdf — NTCIP1202-v03 (MIB transcription)Related source files and packages:
Status in source: mandatory.
Names: unitTimeNonSequentialChange
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"unitTimeNonSequentialChange",
"OBJECT-TYPE",
"SYNTAX",
"Counter",
"ACCESS",
"read-only",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"<Definition> The 'new' globalTime after a non-sequential change to the ASC clock time. A non-sequential change occurs anytime the clock changes by more than 1 increment (whether in seconds or milliseconds). The value of this object is number of seconds since the epoch of 00:00:00 (midnight) January 1, 1970 UTC (a.k.a. Zulu or GMT). <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.3.22.7 <Object Type> S <Unit> second\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"ascClock",
"7",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"<Definition> The 'new' globalTime after a non-sequential change to the ASC clock time. A non-sequential change occurs anytime the clock changes by more than 1 increment (whether in seconds or milliseconds). The value of this object is number of seconds since the epoch of 00:00:00 (midnight) January 1, 1970 UTC (a.k.a. Zulu or GMT). <Object Identifier> 1.3.6.1.4.1.1206.4.2.1.3.22.7 <Object Type> S <Unit> second"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Module: NTCIP1202-v03
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['IpAddress', 'Counter', 'null'], 'RFC1213-MIB': ['DisplayString', 'ifIndex'], 'NTCIP8004v02': ['OwnerString', 'OerString', 'devices']}Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.
Source data warning: This record is transcribed from a published NTCIP MIB annex. The downloadable text is a derived transcription with page furniture and section headings masked; the unmodified original PDF is authoritative. Native definitions, DESCRIPTION and STATUS are retained. A published object definition does not establish support by any particular device.
Source data warning: Potentially inaccurate interpretation of historical NTCIP namespace references: NTCIP8004v02. These exact source files require the reviewed bindings shown below. The numeric roots used here are the explicit assignments in normative Annex A.2 of published NTCIP 8004 v02 (2010), physical pages 43–44. This does not establish that every historical module revision is identical. The annex also prints enterprise instead of RFC 1155 enterprises and declares Protocols while referencing protocols; those spelling interpretations are disclosed. The original IMPORTS, numeric suffixes and definitions remain unchanged. Verify both originals before implementation.
· Download NTCIP-1202v03.35e-aspublished.pdf — NTCIP1202-v03 (MIB transcription)Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1206.4.2.1.3.22.1 | maxTimeSources | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.1.3.22.2 | unitTimeTable | 1 | 3 | |
| 1.3.6.1.4.1.1206.4.2.1.3.22.3 | unitTimeSourceCommanded | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.1.3.22.4 | unitTimeSourceCurrent | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.1.3.22.5 | unitTimeSourceStatus | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.1.3.22.6 | unitTimeNonSequentialSource | 0 | 0 | |
| 1.3.6.1.4.1.1206.4.2.1.3.22.8 | unitTimeNonSequentialDelta | 0 | 0 |