Identification of cause for failure while
configuring/modifying SPVC parameters.
noSpvcConfigured : There endpoint has not been
configured as SPVC,so SPVC parameters can't be
modified.
spvcAlreadyConfigured : SPVC is already configured,
so it cann't be configured again as SPVC
endpoint.
noInterfaceConfigured : There is no interface
Configured.
interafceNotConfiguredAsRequired : While
configuring it as SPVC endpoint, this interface
is not as desired (e.g., it is not CE, while
trying to configure CES SPVC).
notActiveSpvc : This endpoint is 'Passive' SPVC
endpoint,so SPVC paramerers cann't be modified.
retryIntervalTooSmall : If we retry at intervals
less than this, some calls may not go through.
dlciUnavailable : dlci not available at Passive
endpoint.
pvcAlreadySetupOnDlci : dlci being used by another
pvc.
frTrafficParamsUnsupp : fr-atm traffic mapping
failure.
dsp2ParamsUnsupp : dsp2 params not supported
for the call.
hsarNotConfigReq : sarType not configured as
required.
Parsed from file ac120.my.V07.00.C00.mib.txt
Company: None
Module: ACMIB
An identified reason for failure while
configuring/modifying SPVC parameters.
noSpvcConfigured(1) : There endpoint has not been configured
as SPVC, so SPVC parameters cannot be modified.
spvcAlreadyConfigured(2) : SPVC is already configured so it cannot
be configured again as SPVC endpoint.
noInterfaceConfigured(3) : There is no interface configured on the
particular SSPPCCC.
interfaceNotConfiguredAsRequired(4) : While configuring an SPVC
endpoint, the interface is not as desired (e.g.it is not CE,
while trying to configure CES SPVC).
notActiveSpvc(6) : If the endpoint is configured with flowType
ptToMptA2B the connType has to be activeSvc.
slotA-OutofRange(7) : A-side of SPVC connection has slot number
out of range.
portA-OutofRange(8): A-side of SPVC connection has port number
out of range.
channelA-OutofRange(9): A-side of SPVC connection has channel number
out of range.
vpiVciWithInSvcRange(10) : A-side side of SPVC connection has vpi/vci
configured in the SVC range of the A-side ATM interface.
retryIntervalExceedsTheLimit(11) : retryInterval exceeds 3600s.
interfaceNotConfiguredAsCE(12) : SPVC endpoint is configured as
something other than CE.
interfaceNotConfiguredAsVbr(13) : SPVC endpoint is configured as
something other than TE.
interfaceNotConfiguredAsAtm(14) : SPVC endpoint is configured as
something other than ATM.
noAddressConfiguredOnTheInterface(15) : Local address not configured
for the particular SPVC being configured.
localAddressNotValid(16) : invalid NSAP address format
vpiVciUnavailable(17) : SPVC already setup on particular vpi/vci.
pvcAlreadySetupOnVpiVci(18) : vpi/vci being used by another pvc.
pvcAlreadySetupOnInterface(19) : redundant, same as above.
interfaceNotConfiguredAsFr(21) : SPVC endpoint is configured as
something other than Fr
dlciUnavailable(22) : dlci not available at Passive endpoint.
pvcAlreadySetupOnDlci(23) : dlci being used by another pvc.
frTrafficParamsUnsupp(24) : fr-atm traffic mapping failure.
dsp2ParamsUnsupp(25) : dsp2 params not supported for the call.
sarNotConfigReq(26) : sarType not configured as required.
Parsed from file ACMIB.mib
Module: ACMIB
Vendor: Lucent Technologies
Module: ACMIB
[Automatically extracted from oidview.com]
spvcConfigFailureCode OBJECT-TYPE SYNTAX INTEGER { noSpvcConfigured(1), spvcAlreadyConfigured(2), noInterfaceConfigured(3), interfaceNotConfiguredAsRequired(4), notActiveSpvc(6), slotA-OutofRange(7), portA-OutofRange(8), channelA-OutofRange(9), vpiVciWithInSvcRange(10), retryIntervalExceedsTheLimit(11), interfaceNotConfiguredAsCE(12), interfaceNotConfiguredAsVbr(13), interfaceNotConfiguredAsAtm(14), noAddressConfiguredOnTheInterface(15), localAddressNotValid(16), vpiVciUnavailable(17), pvcAlreadySetupOnVpiVci(18), pvcAlreadySetupOnInterface(19), retryIntervalTooSmall(20), interfaceNotConfiguredAsFr(21), dlciUnavailable(22), pvcAlreadySetupOnDlci(23), frTrafficParamsUnsupp(24), dsp2ParamsUnsupp(25), sarNotConfigReq(26) } MAX-ACCESS read-only STATUS current DESCRIPTION "Identification of cause for failure while configuring/modifying SPVC parameters. noSpvcConfigured : There endpoint has not been configured as SPVC,so SPVC parameters can't be modified. spvcAlreadyConfigured : SPVC is already configured, so it cann't be configured again as SPVC endpoint. noInterfaceConfigured : There is no interface Configured. interafceNotConfiguredAsRequired : While configuring it as SPVC endpoint, this interface is not as desired (e.g., it is not CE, while trying to configure CES SPVC). notActiveSpvc : This endpoint is 'Passive' SPVC endpoint,so SPVC paramerers cann't be modified. retryIntervalTooSmall : If we retry at intervals less than this, some calls may not go through. dlciUnavailable : dlci not available at Passive endpoint. pvcAlreadySetupOnDlci : dlci being used by another pvc. frTrafficParamsUnsupp : fr-atm traffic mapping failure. dsp2ParamsUnsupp : dsp2 params not supported for the call. hsarNotConfigReq : sarType not configured as required." ::= { returnCode 17 }
spvcConfigFailureCode OBJECT-TYPE SYNTAX INTEGER { noSpvcConfigured(1), spvcAlreadyConfigured(2), noInterfaceConfigured(3), interfaceNotConfiguredAsRequired(4), notActiveSpvc(6), slotA-OutofRange(7), portA-OutofRange(8), channelA-OutofRange(9), vpiVciWithInSvcRange(10), retryIntervalExceedsTheLimit(11), interfaceNotConfiguredAsCE(12), interfaceNotConfiguredAsVbr(13), interfaceNotConfiguredAsAtm(14), noAddressConfiguredOnTheInterface(15), localAddressNotValid(16), vpiVciUnavailable(17), pvcAlreadySetupOnVpiVci(18), pvcAlreadySetupOnInterface(19), retryIntervalTooSmall(20), interfaceNotConfiguredAsFr(21), dlciUnavailable(22), pvcAlreadySetupOnDlci(23), frTrafficParamsUnsupp(24), dsp2ParamsUnsupp(25), sarNotConfigReq(26), vuniNotMatch(27) } MAX-ACCESS read-only STATUS current DESCRIPTION "An identified reason for failure while configuring/modifying SPVC parameters. noSpvcConfigured(1) : There endpoint has not been configured as SPVC, so SPVC parameters cannot be modified. spvcAlreadyConfigured(2) : SPVC is already configured so it cannot be configured again as SPVC endpoint. noInterfaceConfigured(3) : There is no interface configured on the particular SSPPCCC. interfaceNotConfiguredAsRequired(4) : While configuring an SPVC endpoint, the interface is not as desired (e.g.it is not CE, while trying to configure CES SPVC). notActiveSpvc(6) : If the endpoint is configured with flowType ptToMptA2B the connType has to be activeSvc. slotA-OutofRange(7) : A-side of SPVC connection has slot number out of range. portA-OutofRange(8): A-side of SPVC connection has port number out of range. channelA-OutofRange(9): A-side of SPVC connection has channel number out of range. vpiVciWithInSvcRange(10) : A-side side of SPVC connection has vpi/vci configured in the SVC range of the A-side ATM interface. retryIntervalExceedsTheLimit(11) : retryInterval exceeds 3600s. interfaceNotConfiguredAsCE(12) : SPVC endpoint is configured as something other than CE. interfaceNotConfiguredAsVbr(13) : SPVC endpoint is configured as something other than TE. interfaceNotConfiguredAsAtm(14) : SPVC endpoint is configured as something other than ATM. noAddressConfiguredOnTheInterface(15) : Local address not configured for the particular SPVC being configured. localAddressNotValid(16) : invalid NSAP address format vpiVciUnavailable(17) : SPVC already setup on particular vpi/vci. pvcAlreadySetupOnVpiVci(18) : vpi/vci being used by another pvc. pvcAlreadySetupOnInterface(19) : redundant, same as above. interfaceNotConfiguredAsFr(21) : SPVC endpoint is configured as something other than Fr dlciUnavailable(22) : dlci not available at Passive endpoint. pvcAlreadySetupOnDlci(23) : dlci being used by another pvc. frTrafficParamsUnsupp(24) : fr-atm traffic mapping failure. dsp2ParamsUnsupp(25) : dsp2 params not supported for the call. sarNotConfigReq(26) : sarType not configured as required." ::= { returnCode 17 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.15.17.0 | spvcConfigFailureCode | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.15.1 | pvcFailureReasonCode | 1 | 1 | An identified reason why an ATM PVC connection request failed. |
| 1.3.6.1.4.1.1751.2.18.15.2 | interfaceIndex | 1 | 1 | Interface index used for identifcation in traps. Number value is interpreted as an interface of the form, SSPPCCC, where SS is th… |
| 1.3.6.1.4.1.1751.2.18.15.3 | interfaceType | 1 | 1 | Interface type used for identification in traps. A specific interface is associated with each number. |
| 1.3.6.1.4.1.1751.2.18.15.4 | interfaceFailureReasonCode | 1 | 1 | Identification of cause for failure in changing the status of an interface. interfaceInService: Most, if not all, modifications r… |
| 1.3.6.1.4.1.1751.2.18.15.5 | powerSupplyReasonCode | 1 | 1 | Identification for change in status of a power supply. |
| 1.3.6.1.4.1.1751.2.18.15.6 | portId | 1 | 1 | Port ID used for identification in traps. Number value is interpreted as a port of the form, SSPP, where SS is the card slot and… |
| 1.3.6.1.4.1.1751.2.18.15.7 | lineStatus | 1 | 1 | Bit map of the status of a line connected to a port. |
| 1.3.6.1.4.1.1751.2.18.15.8 | firmwareDownloadReasonCode | 1 | 1 | The suspected reasons of why a firmware download would fail. |
| 1.3.6.1.4.1.1751.2.18.15.9 | remoteRebootReasonCode | 1 | 1 | The result of a remote reboot request. |
| 1.3.6.1.4.1.1751.2.18.15.10 | saveConfigurationReasonCode | 1 | 1 | The result of a save configuration request. |
| 1.3.6.1.4.1.1751.2.18.15.11 | versionConfigurationReasonCode | 1 | 1 | Indicated status and results of version changing |
| 1.3.6.1.4.1.1751.2.18.15.12 | percentComplete | 1 | 1 | Used for trap fileTransferStatusNotify and value equals the percent of the upgrade, downgrade, or ftp download completed. |
| 1.3.6.1.4.1.1751.2.18.15.13 | ipTypeReasonCode | 1 | 1 | Indicator of which ip address had the problem. |
| 1.3.6.1.4.1.1751.2.18.15.14 | timingReasonCode | 1 | 1 | Indicator of type of relationship violated. |
| 1.3.6.1.4.1.1751.2.18.15.15 | alarmCardReasonCode | 1 | 1 | Configuration status of the alarm inputs and outputs. |
| 1.3.6.1.4.1.1751.2.18.15.16 | removeConfigFiles | 1 | 1 | Used to indicate the status of a remove configuration files request. |
| 1.3.6.1.4.1.1751.2.18.15.18 | imaGrpChannelStatus | 1 | 1 | The return value for the imaGrpChannelFailNotify trap. startupFe cfgAbort configuartion parameters cfgAbortFe configuration paramete… |
| 1.3.6.1.4.1.1751.2.18.15.19 | atmImaIntfStatus | 1 | 1 | The return value for the atmImaIntfFailNotify trap. lif (Loss of IMA Frame) lods (Link Out of Delay Synchronization) txMisConnect the… |
| 1.3.6.1.4.1.1751.2.18.15.20 | deviceId | 1 | 1 | device ID is used as the number of external devices. Each device can be an external input device or control output device. |
| 1.3.6.1.4.1.1751.2.18.15.21 | oamTestFailureReasonCode | 1 | 1 | An identified reason why an OAM Loopback Test request has failed. |
| 1.3.6.1.4.1.1751.2.18.15.22 | pnniCode | 1 | 1 | An identified reason for Miscellaneous Reasons in PNNI Configuration. |
| 1.3.6.1.4.1.1751.2.18.15.23 | swtchNodeIndx | 1 | 1 | Switch Node Index for PNNI. |
| 1.3.6.1.4.1.1751.2.18.15.24 | oc3APSPairPortIndex | 1 | 1 | APS Pair Port index - SSPP |
| 1.3.6.1.4.1.1751.2.18.15.25 | oc3APSReasonCode | 1 | 1 | Enumerated values of the outcome of previous apsPair UserCommand or alarms on the line |
| 1.3.6.1.4.1.1751.2.18.15.26 | oc3APSK1K2Rx | 1 | 1 | Rx K1/K2 followed by hex value of K1, K2 |
| 1.3.6.1.4.1.1751.2.18.15.27 | oc3APSK1K2Tx | 1 | 1 | Tx K1/K2 followed by hex value of K1, K2 |
| 1.3.6.1.4.1.1751.2.18.15.28 | oc3APSSelectorState | 1 | 1 | W: active/standby P: standby/active |
| 1.3.6.1.4.1.1751.2.18.15.29 | oc3APSWorkingLineSignalStatus | 1 | 1 | Line Status of the working port sent in a trap |
| 1.3.6.1.4.1.1751.2.18.15.30 | oc3APSProtectionLineSignalStatus | 1 | 1 | Line Status of the protection port sent in a trap. |
| 1.3.6.1.4.1.1751.2.18.15.31 | arpStatus | 1 | 1 | Success: Arp Data is Available. Failure: Reply from RS Card timed-out. |
| 1.3.6.1.4.1.1751.2.18.15.32 | routingStatus | 1 | 1 | Success: Routing Data is Available. Failure: Reply from RS Card timed-out. |
| 1.3.6.1.4.1.1751.2.18.15.33 | vpnTrapStatus | 1 | 1 | Return codes for route server VPN level operations. |
| 1.3.6.1.4.1.1751.2.18.15.34 | ipIntfStatus | 1 | 1 | Return codes for route server IP interface operations. |
| 1.3.6.1.4.1.1751.2.18.15.35 | subChanStatus | 1 | 1 | Return codes for route server sub channel connections operations. |
| 1.3.6.1.4.1.1751.2.18.15.36 | routeSrvStatus | 1 | 1 | Return codes for basic route server task operations not related to any specific VPN or IP/Connection operation. |
| 1.3.6.1.4.1.1751.2.18.15.37 | apsFailureReasonCode | 1 | 1 | aps failure reason |
| 1.3.6.1.4.1.1751.2.18.15.38 | statRtStatus | 1 | 1 | Return codes for route server static route condititions. |
| 1.3.6.1.4.1.1751.2.18.15.39 | portFailureReasonCode | 1 | 1 | Identification of cause for failure in changing the parameters of a port |
| 1.3.6.1.4.1.1751.2.18.15.40 | dlciNumber | 1 | 1 | The number of the dlci being used. |
| 1.3.6.1.4.1.1751.2.18.15.41 | ipAddrNumber | 1 | 1 | The IP address of the host/network to be echoed |
| 1.3.6.1.4.1.1751.2.18.15.42 | pingStatusReasonCode | 1 | 1 | The response value - Alive/Not Alive |
| 1.3.6.1.4.1.1751.2.18.15.43 | primarySoftwareVersion | 1 | 1 | Software version running on primary cpu. |
| 1.3.6.1.4.1.1751.2.18.15.44 | backupSoftwareVersion | 1 | 1 | Software version running on backup cpu. |
| 1.3.6.1.4.1.1751.2.18.15.45 | oamActDeactResultCode | 1 | 1 | Various result codes for the operator's command for OAM Activation-Deactivation. |
| 1.3.6.1.4.1.1751.2.18.15.46 | tasCmprsAnnceReasonCode | 1 | 1 | The result of a compress announcement request. |
| 1.3.6.1.4.1.1751.2.18.15.47 | tasTstLineReasonCode | 1 | 1 | The result of a test line request. |
| 1.3.6.1.4.1.1751.2.18.15.48 | gr303PPSReasonCode | 1 | 1 | gr303 PPS reason code |
| 1.3.6.1.4.1.1751.2.18.15.49 | gr303PPSSource | 1 | 1 | gr303 PPS source |
| 1.3.6.1.4.1.1751.2.18.15.50 | tasMemReasonCode | 1 | 1 | The result of a memory init request. |
| 1.3.6.1.4.1.1751.2.18.15.51 | tasTrapTstId | 1 | 1 | Announcement ID for trap. |
| 1.3.6.1.4.1.1751.2.18.15.52 | tasTrapAnnceId | 1 | 1 | test id for trap. |
| 1.3.6.1.4.1.1751.2.18.15.53 | atmVpi | 1 | 1 | Vpi is used in identification of Traps |
| 1.3.6.1.4.1.1751.2.18.15.54 | atmVci | 1 | 1 | Vci is used in identification of Traps |
| 1.3.6.1.4.1.1751.2.18.15.55 | iptResultCode | 1 | 1 | Various result codes for the operator's command forsetting/deleting interface protection group. |
| 1.3.6.1.4.1.1751.2.18.15.56 | pgtResultCode | 1 | 1 | Various result codes for the operator's command for interface protection . |
| 1.3.6.1.4.1.1751.2.18.15.57 | tasmControlBlockAllocFailReasonCode | 1 | 1 | The result of a tasm control block memory allocation request. |
| 1.3.6.1.4.1.1751.2.18.15.58 | tasmCacheMemAllocFailReasonCode | 1 | 1 | The result of a tasm control block memory allocation request. |
| 1.3.6.1.4.1.1751.2.18.15.59 | atmTrunkingConfigFailureCode | 1 | 1 | An identified reason for failure while configuring/modifying ATM Trunking parameters: localIWFAlreadyConfigured(1) : Local IWF has… |
| 1.3.6.1.4.1.1751.2.18.15.60 | sapphireIntfAddressFailReasonCode | 1 | 1 | The result of assigning the Sapphire Interface address when PSAX is Sapphire client. address-ok(1), Address assignment suc… |
| 1.3.6.1.4.1.1751.2.18.15.61 | chassisOverTempAlarmReasonCode | 1 | 1 | Indicator of presence of chassis over temperature alarm. |