Return codes for route server static route
condititions.
Parsed from file ac120.my.V07.00.C00.mib.txt
Company: None
Module: ACMIB
Return codes for route server static route
condititions.
statRtOk(1) Static Rt OK
statRtIntFailure(2) Memory Corruption
statRtMany(3) Too Many Static Routes
statRtSlot(4) Impossible Slot ID
statRtBadId(5) Bad VPN ID
statRtBadState(6) State Machine Confusion
statRtBadTimer(7) Bad Timer Value: State Machine
statRtExists(8) Static Rt Already Exists
statRtCantFind(9) Unused
statRtDelInProgress(10) Deleting: -Must Wait
statRtLockedIdle(11) Static Rt Taken Out Of Service
statRtBadNetMask(12) Bad Network Mask
statRtCorrelation(13) Internal Correlation Error
statRtShutting(14) Shutting Down: -Must Wait
statRtDisabled(15) SubSystem Failure
statRtBadMetric(16) Illegal Metric Value
statRtBadIPAddr(17) Bad Static Route IP Address
intfRtExists(18) Static Route On Different Intf.
statRtBadSlot(19) Impossible Slot ID
statRtBadRouterId(20) Bad VPN/Router ID
statRtBadRouteId(21) Illegal Static Route ID
statRtBadRouteNetMask(22) Bad Stat Route Network Mask
statRtBadRouteIpAddr(23) Bad Interface IP Address
statRtBadGtwyIpAddr(24) Bad Gateway IP Address
statRtBadDestIpAddr(25) Bad Destination IP Address
statRtBadDestNetMask(26) Bad Destination IP Mask
statRtCantFindRouter(27) Cannot Find VPN
statRtCantFindRoute(28) Cannot Find Static Route
Parsed from file ACMIB.mib
Module: ACMIB
Vendor: Lucent Technologies
Module: ACMIB
[Automatically extracted from oidview.com]
statRtStatus OBJECT-TYPE SYNTAX INTEGER { statRtOk(1), statRtIntFailure(2), statRtMany(3), statRtSlot(4), statRtBadId(5), statRtBadState(6), statRtBadTimer(7), statRtExists(8), statRtCantFind(9), statRtDelInProgress(10), statRtLockedIdle(11), statRtBadNetMask(12), statRtCorrelation(13), statRtShutting(14), statRtDisabled(15), statRtBadMetric(16), statRtBadIPAddr(17), intfRtExists(18), statRtBadSlot(19), statRtBadRouterId(20), statRtBadRouteId(21), statRtBadRouteNetMask(22), statRtBadRouteIpAddr(23), statRtBadGtwyIpAddr(24), statRtBadDestIpAddr(25), statRtBadDestNetMask(26), statRtCantFindRouter(27), statRtCantFindRoute(28) } MAX-ACCESS read-only STATUS current DESCRIPTION "Return codes for route server static route condititions." ::= { returnCode 38 }
statRtStatus OBJECT-TYPE SYNTAX INTEGER { statRtOk(1), statRtIntFailure(2), statRtMany(3), statRtSlot(4), statRtBadId(5), statRtBadState(6), statRtBadTimer(7), statRtExists(8), statRtCantFind(9), statRtDelInProgress(10), statRtLockedIdle(11), statRtBadNetMask(12), statRtCorrelation(13), statRtShutting(14), statRtDisabled(15), statRtBadMetric(16), statRtBadIPAddr(17), intfRtExists(18), statRtBadSlot(19), statRtBadRouterId(20), statRtBadRouteId(21), statRtBadRouteNetMask(22), statRtBadRouteIpAddr(23), statRtBadGtwyIpAddr(24), statRtBadDestIpAddr(25), statRtBadDestNetMask(26), statRtCantFindRouter(27), statRtCantFindRoute(28) } MAX-ACCESS read-only STATUS current DESCRIPTION "Return codes for route server static route condititions. statRtOk(1) Static Rt OK statRtIntFailure(2) Memory Corruption statRtMany(3) Too Many Static Routes statRtSlot(4) Impossible Slot ID statRtBadId(5) Bad VPN ID statRtBadState(6) State Machine Confusion statRtBadTimer(7) Bad Timer Value: State Machine statRtExists(8) Static Rt Already Exists statRtCantFind(9) Unused statRtDelInProgress(10) Deleting: -Must Wait statRtLockedIdle(11) Static Rt Taken Out Of Service statRtBadNetMask(12) Bad Network Mask statRtCorrelation(13) Internal Correlation Error statRtShutting(14) Shutting Down: -Must Wait statRtDisabled(15) SubSystem Failure statRtBadMetric(16) Illegal Metric Value statRtBadIPAddr(17) Bad Static Route IP Address intfRtExists(18) Static Route On Different Intf. statRtBadSlot(19) Impossible Slot ID statRtBadRouterId(20) Bad VPN/Router ID statRtBadRouteId(21) Illegal Static Route ID statRtBadRouteNetMask(22) Bad Stat Route Network Mask statRtBadRouteIpAddr(23) Bad Interface IP Address statRtBadGtwyIpAddr(24) Bad Gateway IP Address statRtBadDestIpAddr(25) Bad Destination IP Address statRtBadDestNetMask(26) Bad Destination IP Mask statRtCantFindRouter(27) Cannot Find VPN statRtCantFindRoute(28) Cannot Find Static Route" ::= { returnCode 38 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.15.38.0 | statRtStatus | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.15.1 | pvcFailureReasonCode | 1 | 1 | An identified reason why an ATM PVC connection request failed. |
| 1.3.6.1.4.1.1751.2.18.15.2 | interfaceIndex | 1 | 1 | Interface index used for identifcation in traps. Number value is interpreted as an interface of the form, SSPPCCC, where SS is th… |
| 1.3.6.1.4.1.1751.2.18.15.3 | interfaceType | 1 | 1 | Interface type used for identification in traps. A specific interface is associated with each number. |
| 1.3.6.1.4.1.1751.2.18.15.4 | interfaceFailureReasonCode | 1 | 1 | Identification of cause for failure in changing the status of an interface. interfaceInService: Most, if not all, modifications r… |
| 1.3.6.1.4.1.1751.2.18.15.5 | powerSupplyReasonCode | 1 | 1 | Identification for change in status of a power supply. |
| 1.3.6.1.4.1.1751.2.18.15.6 | portId | 1 | 1 | Port ID used for identification in traps. Number value is interpreted as a port of the form, SSPP, where SS is the card slot and… |
| 1.3.6.1.4.1.1751.2.18.15.7 | lineStatus | 1 | 1 | Bit map of the status of a line connected to a port. |
| 1.3.6.1.4.1.1751.2.18.15.8 | firmwareDownloadReasonCode | 1 | 1 | The suspected reasons of why a firmware download would fail. |
| 1.3.6.1.4.1.1751.2.18.15.9 | remoteRebootReasonCode | 1 | 1 | The result of a remote reboot request. |
| 1.3.6.1.4.1.1751.2.18.15.10 | saveConfigurationReasonCode | 1 | 1 | The result of a save configuration request. |
| 1.3.6.1.4.1.1751.2.18.15.11 | versionConfigurationReasonCode | 1 | 1 | Indicated status and results of version changing |
| 1.3.6.1.4.1.1751.2.18.15.12 | percentComplete | 1 | 1 | Used for trap fileTransferStatusNotify and value equals the percent of the upgrade, downgrade, or ftp download completed. |
| 1.3.6.1.4.1.1751.2.18.15.13 | ipTypeReasonCode | 1 | 1 | Indicator of which ip address had the problem. |
| 1.3.6.1.4.1.1751.2.18.15.14 | timingReasonCode | 1 | 1 | Indicator of type of relationship violated. |
| 1.3.6.1.4.1.1751.2.18.15.15 | alarmCardReasonCode | 1 | 1 | Configuration status of the alarm inputs and outputs. |
| 1.3.6.1.4.1.1751.2.18.15.16 | removeConfigFiles | 1 | 1 | Used to indicate the status of a remove configuration files request. |
| 1.3.6.1.4.1.1751.2.18.15.17 | spvcConfigFailureCode | 1 | 1 | Identification of cause for failure while configuring/modifying SPVC parameters. noSpvcConfigured : There endpoint has not been co… |
| 1.3.6.1.4.1.1751.2.18.15.18 | imaGrpChannelStatus | 1 | 1 | The return value for the imaGrpChannelFailNotify trap. startupFe cfgAbort configuartion parameters cfgAbortFe configuration paramete… |
| 1.3.6.1.4.1.1751.2.18.15.19 | atmImaIntfStatus | 1 | 1 | The return value for the atmImaIntfFailNotify trap. lif (Loss of IMA Frame) lods (Link Out of Delay Synchronization) txMisConnect the… |
| 1.3.6.1.4.1.1751.2.18.15.20 | deviceId | 1 | 1 | device ID is used as the number of external devices. Each device can be an external input device or control output device. |
| 1.3.6.1.4.1.1751.2.18.15.21 | oamTestFailureReasonCode | 1 | 1 | An identified reason why an OAM Loopback Test request has failed. |
| 1.3.6.1.4.1.1751.2.18.15.22 | pnniCode | 1 | 1 | An identified reason for Miscellaneous Reasons in PNNI Configuration. |
| 1.3.6.1.4.1.1751.2.18.15.23 | swtchNodeIndx | 1 | 1 | Switch Node Index for PNNI. |
| 1.3.6.1.4.1.1751.2.18.15.24 | oc3APSPairPortIndex | 1 | 1 | APS Pair Port index - SSPP |
| 1.3.6.1.4.1.1751.2.18.15.25 | oc3APSReasonCode | 1 | 1 | Enumerated values of the outcome of previous apsPair UserCommand or alarms on the line |
| 1.3.6.1.4.1.1751.2.18.15.26 | oc3APSK1K2Rx | 1 | 1 | Rx K1/K2 followed by hex value of K1, K2 |
| 1.3.6.1.4.1.1751.2.18.15.27 | oc3APSK1K2Tx | 1 | 1 | Tx K1/K2 followed by hex value of K1, K2 |
| 1.3.6.1.4.1.1751.2.18.15.28 | oc3APSSelectorState | 1 | 1 | W: active/standby P: standby/active |
| 1.3.6.1.4.1.1751.2.18.15.29 | oc3APSWorkingLineSignalStatus | 1 | 1 | Line Status of the working port sent in a trap |
| 1.3.6.1.4.1.1751.2.18.15.30 | oc3APSProtectionLineSignalStatus | 1 | 1 | Line Status of the protection port sent in a trap. |
| 1.3.6.1.4.1.1751.2.18.15.31 | arpStatus | 1 | 1 | Success: Arp Data is Available. Failure: Reply from RS Card timed-out. |
| 1.3.6.1.4.1.1751.2.18.15.32 | routingStatus | 1 | 1 | Success: Routing Data is Available. Failure: Reply from RS Card timed-out. |
| 1.3.6.1.4.1.1751.2.18.15.33 | vpnTrapStatus | 1 | 1 | Return codes for route server VPN level operations. |
| 1.3.6.1.4.1.1751.2.18.15.34 | ipIntfStatus | 1 | 1 | Return codes for route server IP interface operations. |
| 1.3.6.1.4.1.1751.2.18.15.35 | subChanStatus | 1 | 1 | Return codes for route server sub channel connections operations. |
| 1.3.6.1.4.1.1751.2.18.15.36 | routeSrvStatus | 1 | 1 | Return codes for basic route server task operations not related to any specific VPN or IP/Connection operation. |
| 1.3.6.1.4.1.1751.2.18.15.37 | apsFailureReasonCode | 1 | 1 | aps failure reason |
| 1.3.6.1.4.1.1751.2.18.15.39 | portFailureReasonCode | 1 | 1 | Identification of cause for failure in changing the parameters of a port |
| 1.3.6.1.4.1.1751.2.18.15.40 | dlciNumber | 1 | 1 | The number of the dlci being used. |
| 1.3.6.1.4.1.1751.2.18.15.41 | ipAddrNumber | 1 | 1 | The IP address of the host/network to be echoed |
| 1.3.6.1.4.1.1751.2.18.15.42 | pingStatusReasonCode | 1 | 1 | The response value - Alive/Not Alive |
| 1.3.6.1.4.1.1751.2.18.15.43 | primarySoftwareVersion | 1 | 1 | Software version running on primary cpu. |
| 1.3.6.1.4.1.1751.2.18.15.44 | backupSoftwareVersion | 1 | 1 | Software version running on backup cpu. |
| 1.3.6.1.4.1.1751.2.18.15.45 | oamActDeactResultCode | 1 | 1 | Various result codes for the operator's command for OAM Activation-Deactivation. |
| 1.3.6.1.4.1.1751.2.18.15.46 | tasCmprsAnnceReasonCode | 1 | 1 | The result of a compress announcement request. |
| 1.3.6.1.4.1.1751.2.18.15.47 | tasTstLineReasonCode | 1 | 1 | The result of a test line request. |
| 1.3.6.1.4.1.1751.2.18.15.48 | gr303PPSReasonCode | 1 | 1 | gr303 PPS reason code |
| 1.3.6.1.4.1.1751.2.18.15.49 | gr303PPSSource | 1 | 1 | gr303 PPS source |
| 1.3.6.1.4.1.1751.2.18.15.50 | tasMemReasonCode | 1 | 1 | The result of a memory init request. |
| 1.3.6.1.4.1.1751.2.18.15.51 | tasTrapTstId | 1 | 1 | Announcement ID for trap. |
| 1.3.6.1.4.1.1751.2.18.15.52 | tasTrapAnnceId | 1 | 1 | test id for trap. |
| 1.3.6.1.4.1.1751.2.18.15.53 | atmVpi | 1 | 1 | Vpi is used in identification of Traps |
| 1.3.6.1.4.1.1751.2.18.15.54 | atmVci | 1 | 1 | Vci is used in identification of Traps |
| 1.3.6.1.4.1.1751.2.18.15.55 | iptResultCode | 1 | 1 | Various result codes for the operator's command forsetting/deleting interface protection group. |
| 1.3.6.1.4.1.1751.2.18.15.56 | pgtResultCode | 1 | 1 | Various result codes for the operator's command for interface protection . |
| 1.3.6.1.4.1.1751.2.18.15.57 | tasmControlBlockAllocFailReasonCode | 1 | 1 | The result of a tasm control block memory allocation request. |
| 1.3.6.1.4.1.1751.2.18.15.58 | tasmCacheMemAllocFailReasonCode | 1 | 1 | The result of a tasm control block memory allocation request. |
| 1.3.6.1.4.1.1751.2.18.15.59 | atmTrunkingConfigFailureCode | 1 | 1 | An identified reason for failure while configuring/modifying ATM Trunking parameters: localIWFAlreadyConfigured(1) : Local IWF has… |
| 1.3.6.1.4.1.1751.2.18.15.60 | sapphireIntfAddressFailReasonCode | 1 | 1 | The result of assigning the Sapphire Interface address when PSAX is Sapphire client. address-ok(1), Address assignment suc… |
| 1.3.6.1.4.1.1751.2.18.15.61 | chassisOverTempAlarmReasonCode | 1 | 1 | Indicator of presence of chassis over temperature alarm. |