Return codes for basic route server task
operations not related to any specific VPN
or IP/Connection operation.
Parsed from file ac120.my.V07.00.C00.mib.txt
Company: None
Module: ACMIB
Return codes for basic route server task
operations not related to any specific VPN
or IP/Connection operation.
rsCardOK(1) Route Server OK
rsModInitFail(2) Route Server Failed Module Init.
rsIntfInitFail(3) Route Server Failed Intf. Init.
rsPortInitFail(4) Route Server Failed Port Init
rsRipUpdateIntOK(5) Rip Update Interval was updated
ok for the route server card.
rsRipUpdateIntFail(6) Rip Update Interval was not
updated mostly because of
some VPN's still in service.
Parsed from file ACMIB.mib
Module: ACMIB
Vendor: Lucent Technologies
Module: ACMIB
[Automatically extracted from oidview.com]
routeSrvStatus OBJECT-TYPE SYNTAX INTEGER { rsCardOK(1), rsModInitFail(2), rsIntfInitFail(3), rsPortInitFail(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Return codes for basic route server task operations not related to any specific VPN or IP/Connection operation." ::= { returnCode 36 }
routeSrvStatus OBJECT-TYPE SYNTAX INTEGER { rsCardOK(1), rsModInitFail(2), rsIntfInitFail(3), rsPortInitFail(4), rsRipUpdateIntOK(5), rsRipUpdateIntFail(6) } MAX-ACCESS read-only STATUS current DESCRIPTION "Return codes for basic route server task operations not related to any specific VPN or IP/Connection operation. rsCardOK(1) Route Server OK rsModInitFail(2) Route Server Failed Module Init. rsIntfInitFail(3) Route Server Failed Intf. Init. rsPortInitFail(4) Route Server Failed Port Init rsRipUpdateIntOK(5) Rip Update Interval was updated ok for the route server card. rsRipUpdateIntFail(6) Rip Update Interval was not updated mostly because of some VPN's still in service." ::= { returnCode 36 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.15.36.0 | routeSrvStatus | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1751.2.18.15.1 | pvcFailureReasonCode | 1 | 1 | An identified reason why an ATM PVC connection request failed. |
| 1.3.6.1.4.1.1751.2.18.15.2 | interfaceIndex | 1 | 1 | Interface index used for identifcation in traps. Number value is interpreted as an interface of the form, SSPPCCC, where SS is th… |
| 1.3.6.1.4.1.1751.2.18.15.3 | interfaceType | 1 | 1 | Interface type used for identification in traps. A specific interface is associated with each number. |
| 1.3.6.1.4.1.1751.2.18.15.4 | interfaceFailureReasonCode | 1 | 1 | Identification of cause for failure in changing the status of an interface. interfaceInService: Most, if not all, modifications r… |
| 1.3.6.1.4.1.1751.2.18.15.5 | powerSupplyReasonCode | 1 | 1 | Identification for change in status of a power supply. |
| 1.3.6.1.4.1.1751.2.18.15.6 | portId | 1 | 1 | Port ID used for identification in traps. Number value is interpreted as a port of the form, SSPP, where SS is the card slot and… |
| 1.3.6.1.4.1.1751.2.18.15.7 | lineStatus | 1 | 1 | Bit map of the status of a line connected to a port. |
| 1.3.6.1.4.1.1751.2.18.15.8 | firmwareDownloadReasonCode | 1 | 1 | The suspected reasons of why a firmware download would fail. |
| 1.3.6.1.4.1.1751.2.18.15.9 | remoteRebootReasonCode | 1 | 1 | The result of a remote reboot request. |
| 1.3.6.1.4.1.1751.2.18.15.10 | saveConfigurationReasonCode | 1 | 1 | The result of a save configuration request. |
| 1.3.6.1.4.1.1751.2.18.15.11 | versionConfigurationReasonCode | 1 | 1 | Indicated status and results of version changing |
| 1.3.6.1.4.1.1751.2.18.15.12 | percentComplete | 1 | 1 | Used for trap fileTransferStatusNotify and value equals the percent of the upgrade, downgrade, or ftp download completed. |
| 1.3.6.1.4.1.1751.2.18.15.13 | ipTypeReasonCode | 1 | 1 | Indicator of which ip address had the problem. |
| 1.3.6.1.4.1.1751.2.18.15.14 | timingReasonCode | 1 | 1 | Indicator of type of relationship violated. |
| 1.3.6.1.4.1.1751.2.18.15.15 | alarmCardReasonCode | 1 | 1 | Configuration status of the alarm inputs and outputs. |
| 1.3.6.1.4.1.1751.2.18.15.16 | removeConfigFiles | 1 | 1 | Used to indicate the status of a remove configuration files request. |
| 1.3.6.1.4.1.1751.2.18.15.17 | spvcConfigFailureCode | 1 | 1 | Identification of cause for failure while configuring/modifying SPVC parameters. noSpvcConfigured : There endpoint has not been co… |
| 1.3.6.1.4.1.1751.2.18.15.18 | imaGrpChannelStatus | 1 | 1 | The return value for the imaGrpChannelFailNotify trap. startupFe cfgAbort configuartion parameters cfgAbortFe configuration paramete… |
| 1.3.6.1.4.1.1751.2.18.15.19 | atmImaIntfStatus | 1 | 1 | The return value for the atmImaIntfFailNotify trap. lif (Loss of IMA Frame) lods (Link Out of Delay Synchronization) txMisConnect the… |
| 1.3.6.1.4.1.1751.2.18.15.20 | deviceId | 1 | 1 | device ID is used as the number of external devices. Each device can be an external input device or control output device. |
| 1.3.6.1.4.1.1751.2.18.15.21 | oamTestFailureReasonCode | 1 | 1 | An identified reason why an OAM Loopback Test request has failed. |
| 1.3.6.1.4.1.1751.2.18.15.22 | pnniCode | 1 | 1 | An identified reason for Miscellaneous Reasons in PNNI Configuration. |
| 1.3.6.1.4.1.1751.2.18.15.23 | swtchNodeIndx | 1 | 1 | Switch Node Index for PNNI. |
| 1.3.6.1.4.1.1751.2.18.15.24 | oc3APSPairPortIndex | 1 | 1 | APS Pair Port index - SSPP |
| 1.3.6.1.4.1.1751.2.18.15.25 | oc3APSReasonCode | 1 | 1 | Enumerated values of the outcome of previous apsPair UserCommand or alarms on the line |
| 1.3.6.1.4.1.1751.2.18.15.26 | oc3APSK1K2Rx | 1 | 1 | Rx K1/K2 followed by hex value of K1, K2 |
| 1.3.6.1.4.1.1751.2.18.15.27 | oc3APSK1K2Tx | 1 | 1 | Tx K1/K2 followed by hex value of K1, K2 |
| 1.3.6.1.4.1.1751.2.18.15.28 | oc3APSSelectorState | 1 | 1 | W: active/standby P: standby/active |
| 1.3.6.1.4.1.1751.2.18.15.29 | oc3APSWorkingLineSignalStatus | 1 | 1 | Line Status of the working port sent in a trap |
| 1.3.6.1.4.1.1751.2.18.15.30 | oc3APSProtectionLineSignalStatus | 1 | 1 | Line Status of the protection port sent in a trap. |
| 1.3.6.1.4.1.1751.2.18.15.31 | arpStatus | 1 | 1 | Success: Arp Data is Available. Failure: Reply from RS Card timed-out. |
| 1.3.6.1.4.1.1751.2.18.15.32 | routingStatus | 1 | 1 | Success: Routing Data is Available. Failure: Reply from RS Card timed-out. |
| 1.3.6.1.4.1.1751.2.18.15.33 | vpnTrapStatus | 1 | 1 | Return codes for route server VPN level operations. |
| 1.3.6.1.4.1.1751.2.18.15.34 | ipIntfStatus | 1 | 1 | Return codes for route server IP interface operations. |
| 1.3.6.1.4.1.1751.2.18.15.35 | subChanStatus | 1 | 1 | Return codes for route server sub channel connections operations. |
| 1.3.6.1.4.1.1751.2.18.15.37 | apsFailureReasonCode | 1 | 1 | aps failure reason |
| 1.3.6.1.4.1.1751.2.18.15.38 | statRtStatus | 1 | 1 | Return codes for route server static route condititions. |
| 1.3.6.1.4.1.1751.2.18.15.39 | portFailureReasonCode | 1 | 1 | Identification of cause for failure in changing the parameters of a port |
| 1.3.6.1.4.1.1751.2.18.15.40 | dlciNumber | 1 | 1 | The number of the dlci being used. |
| 1.3.6.1.4.1.1751.2.18.15.41 | ipAddrNumber | 1 | 1 | The IP address of the host/network to be echoed |
| 1.3.6.1.4.1.1751.2.18.15.42 | pingStatusReasonCode | 1 | 1 | The response value - Alive/Not Alive |
| 1.3.6.1.4.1.1751.2.18.15.43 | primarySoftwareVersion | 1 | 1 | Software version running on primary cpu. |
| 1.3.6.1.4.1.1751.2.18.15.44 | backupSoftwareVersion | 1 | 1 | Software version running on backup cpu. |
| 1.3.6.1.4.1.1751.2.18.15.45 | oamActDeactResultCode | 1 | 1 | Various result codes for the operator's command for OAM Activation-Deactivation. |
| 1.3.6.1.4.1.1751.2.18.15.46 | tasCmprsAnnceReasonCode | 1 | 1 | The result of a compress announcement request. |
| 1.3.6.1.4.1.1751.2.18.15.47 | tasTstLineReasonCode | 1 | 1 | The result of a test line request. |
| 1.3.6.1.4.1.1751.2.18.15.48 | gr303PPSReasonCode | 1 | 1 | gr303 PPS reason code |
| 1.3.6.1.4.1.1751.2.18.15.49 | gr303PPSSource | 1 | 1 | gr303 PPS source |
| 1.3.6.1.4.1.1751.2.18.15.50 | tasMemReasonCode | 1 | 1 | The result of a memory init request. |
| 1.3.6.1.4.1.1751.2.18.15.51 | tasTrapTstId | 1 | 1 | Announcement ID for trap. |
| 1.3.6.1.4.1.1751.2.18.15.52 | tasTrapAnnceId | 1 | 1 | test id for trap. |
| 1.3.6.1.4.1.1751.2.18.15.53 | atmVpi | 1 | 1 | Vpi is used in identification of Traps |
| 1.3.6.1.4.1.1751.2.18.15.54 | atmVci | 1 | 1 | Vci is used in identification of Traps |
| 1.3.6.1.4.1.1751.2.18.15.55 | iptResultCode | 1 | 1 | Various result codes for the operator's command forsetting/deleting interface protection group. |
| 1.3.6.1.4.1.1751.2.18.15.56 | pgtResultCode | 1 | 1 | Various result codes for the operator's command for interface protection . |
| 1.3.6.1.4.1.1751.2.18.15.57 | tasmControlBlockAllocFailReasonCode | 1 | 1 | The result of a tasm control block memory allocation request. |
| 1.3.6.1.4.1.1751.2.18.15.58 | tasmCacheMemAllocFailReasonCode | 1 | 1 | The result of a tasm control block memory allocation request. |
| 1.3.6.1.4.1.1751.2.18.15.59 | atmTrunkingConfigFailureCode | 1 | 1 | An identified reason for failure while configuring/modifying ATM Trunking parameters: localIWFAlreadyConfigured(1) : Local IWF has… |
| 1.3.6.1.4.1.1751.2.18.15.60 | sapphireIntfAddressFailReasonCode | 1 | 1 | The result of assigning the Sapphire Interface address when PSAX is Sapphire client. address-ok(1), Address assignment suc… |
| 1.3.6.1.4.1.1751.2.18.15.61 | chassisOverTempAlarmReasonCode | 1 | 1 | Indicator of presence of chassis over temperature alarm. |