The number associated with this slot. By convention, the
System Controller is in slot number 1, and the remaining slots
are numbered with increasing integer slot numbers.
Parsed from file CP300.mib.txt
Company: marconi
Module: AAC3-MIB
Vendor: ADC Kentrox
Module: AAC3-MIB (aac3-140.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
(
1..8 )
Automatically extracted from www.mibdepot.com
slotIndex OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-only STATUS mandatory DESCRIPTION "The number associated with this slot. By convention, the System Controller is in slot number 1, and the remaining slots are numbered with increasing integer slot numbers." ::= { slotEntry 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.181.1.13.4.1.1.2 | slotDelAllConnections | 0 | 0 | Setting this variable to dontDeleteAll has no effect. Setting this variable to deleteAll causes all connections to or from any po… |
| 1.3.6.1.4.1.181.1.13.4.1.1.3 | slotPortMapping | 0 | 0 | The current mapping of the internal PM 'hardware resources' (e.g., VBR vs. CBR traffic support) to the actual PLM physical port c… |
| 1.3.6.1.4.1.181.1.13.4.1.1.4 | slotReset | 0 | 0 | Setting this variable to dontReset has no effect. Setting this variable to doReset causes the PM/PLM pair to be reset and restart… |
| 1.3.6.1.4.1.181.1.13.4.1.1.5 | slotPmId | 0 | 0 | The ID for the Protocol Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.6 | slotPmRevision | 0 | 0 | The hardware revision number for the Protocol Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.7 | slotPmSerialNum | 0 | 0 | The serial number for the Protocol Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.8 | slotPmName | 0 | 0 | The nomenclature for the Protocol Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.9 | slotPmCfgdId | 0 | 0 | The ID for the Protocol Module configuration currently held for this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.10 | slotPmCfgdName | 0 | 0 | The nomenclature for the Protocol Module whose configuration is currently held for this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.11 | slotPmStatus | 0 | 0 | This variable reports the current status of the specified Protocol Module slot. Definitions are as follows: empty PM s… |
| 1.3.6.1.4.1.181.1.13.4.1.1.12 | slotPlmId | 0 | 0 | The ID for the Physical Layer Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.13 | slotPlmRevision | 0 | 0 | The hardware revision number for the Physical Layer Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.14 | slotPlmSerialNum | 0 | 0 | The serial number for the Physical Layer Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.15 | slotPlmName | 0 | 0 | The nomenclature for the Physical Layer Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.16 | slotPlmCfgdId | 0 | 0 | The ID for the Physical Layer Module configuration currently held for this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.17 | slotPlmCfgdName | 0 | 0 | The nomenclature for the Physical Layer Module whose configuration is currently held for this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.18 | slotPlmStatus | 0 | 0 | This variable reports the current status of the specified Physical Layer Module slot. Definitions are as follows: empty … |
| 1.3.6.1.4.1.181.1.13.4.1.1.19 | slotModuleStatusLed | 0 | 0 | The state of PM module `Status' LED for this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.20 | slotTestLed | 0 | 0 | The state of PM module `Test' LED for this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.21 | slotPmCondition | 0 | 0 | The condition of the PM for this slot: pmReady The PM is ready. pmIndeterminate The PM is slot is empty, dead, or… |
| 1.3.6.1.4.1.181.1.13.4.1.1.22 | slotPlmCondition | 0 | 0 | The condition of the PLM for this slot: plmReady The PLM is ready. plmIndeterminate The PLM is slot is empty, dead,… |