This variable reports the current status of the specified
Protocol Module slot. Definitions are as follows:
empty PM slot is empty.
puReset PM is in power-up reset state.
unsupported PM type is not supported.
badCombination PM/PLM combination is not supported.
dead PM/PLM pair is dead.
configured PM/PLM pair is operational.
userWait PM type does not match configuration,
so waiting for user to accept/reject.
plmWait PM waiting for a PLM to be installed.
noBandwidth Too many high-bandwidth PM/PLMs are
installed; thus, this PM has no input
bandwidth available, and is disabled.
invalid The PM/PLM pair is in an invalid port
configuration.
revMismatch The PM hardware revision level does
not support some aspect of the stored
configuration for this slot.
Parsed from file CP300.mib.txt
Company: marconi
Module: AAC3-MIB
Vendor: ADC Kentrox
Module: AAC3-MIB (aac3-140.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
slotPmStatus OBJECT-TYPE SYNTAX INTEGER { empty(1), puReset(2), unsupported(3), badCombination(4), dead(5), configured(6), userWait(7), plmWait(8), noBandwidth(9), invalid(10), revMismatch(11) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable reports the current status of the specified Protocol Module slot. Definitions are as follows: empty PM slot is empty. puReset PM is in power-up reset state. unsupported PM type is not supported. badCombination PM/PLM combination is not supported. dead PM/PLM pair is dead. configured PM/PLM pair is operational. userWait PM type does not match configuration, so waiting for user to accept/reject. plmWait PM waiting for a PLM to be installed. noBandwidth Too many high-bandwidth PM/PLMs are installed; thus, this PM has no input bandwidth available, and is disabled. invalid The PM/PLM pair is in an invalid port configuration. revMismatch The PM hardware revision level does not support some aspect of the stored configuration for this slot." ::= { slotEntry 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.181.1.13.4.1.1.1 | slotIndex | 0 | 0 | The number associated with this slot. By convention, the System Controller is in slot number 1, and the remaining slots are numb… |
| 1.3.6.1.4.1.181.1.13.4.1.1.2 | slotDelAllConnections | 0 | 0 | Setting this variable to dontDeleteAll has no effect. Setting this variable to deleteAll causes all connections to or from any po… |
| 1.3.6.1.4.1.181.1.13.4.1.1.3 | slotPortMapping | 0 | 0 | The current mapping of the internal PM 'hardware resources' (e.g., VBR vs. CBR traffic support) to the actual PLM physical port c… |
| 1.3.6.1.4.1.181.1.13.4.1.1.4 | slotReset | 0 | 0 | Setting this variable to dontReset has no effect. Setting this variable to doReset causes the PM/PLM pair to be reset and restart… |
| 1.3.6.1.4.1.181.1.13.4.1.1.5 | slotPmId | 0 | 0 | The ID for the Protocol Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.6 | slotPmRevision | 0 | 0 | The hardware revision number for the Protocol Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.7 | slotPmSerialNum | 0 | 0 | The serial number for the Protocol Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.8 | slotPmName | 0 | 0 | The nomenclature for the Protocol Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.9 | slotPmCfgdId | 0 | 0 | The ID for the Protocol Module configuration currently held for this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.10 | slotPmCfgdName | 0 | 0 | The nomenclature for the Protocol Module whose configuration is currently held for this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.12 | slotPlmId | 0 | 0 | The ID for the Physical Layer Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.13 | slotPlmRevision | 0 | 0 | The hardware revision number for the Physical Layer Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.14 | slotPlmSerialNum | 0 | 0 | The serial number for the Physical Layer Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.15 | slotPlmName | 0 | 0 | The nomenclature for the Physical Layer Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.16 | slotPlmCfgdId | 0 | 0 | The ID for the Physical Layer Module configuration currently held for this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.17 | slotPlmCfgdName | 0 | 0 | The nomenclature for the Physical Layer Module whose configuration is currently held for this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.18 | slotPlmStatus | 0 | 0 | This variable reports the current status of the specified Physical Layer Module slot. Definitions are as follows: empty … |
| 1.3.6.1.4.1.181.1.13.4.1.1.19 | slotModuleStatusLed | 0 | 0 | The state of PM module `Status' LED for this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.20 | slotTestLed | 0 | 0 | The state of PM module `Test' LED for this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.21 | slotPmCondition | 0 | 0 | The condition of the PM for this slot: pmReady The PM is ready. pmIndeterminate The PM is slot is empty, dead, or… |
| 1.3.6.1.4.1.181.1.13.4.1.1.22 | slotPlmCondition | 0 | 0 | The condition of the PLM for this slot: plmReady The PLM is ready. plmIndeterminate The PLM is slot is empty, dead,… |