The ID for the Physical Layer Module currently installed in
this slot.
Parsed from file CP300.mib.txt
Company: marconi
Module: AAC3-MIB
Vendor: ADC Kentrox
Module: AAC3-MIB (aac3-140.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
slotPlmId OBJECT-TYPE SYNTAX INTEGER { none(1), unrecognized(2), extensionModule(3), quadDsx1Plm(4), quadE1Plm(5), triV35Eia530AndDsx1Plm(6), triV35Eia530AndE1Plm(7), e3Plm(8), ds3Plm(9), oc3cStm1MultimodePlm(10), oc3cStm1SinglemodePlm(11), j2Plm(12), quadV35Eia530Plm(13) } ACCESS read-only STATUS mandatory DESCRIPTION "The ID for the Physical Layer Module currently installed in this slot." ::= { slotEntry 12 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.181.1.13.4.1.1.1 | slotIndex | 0 | 0 | The number associated with this slot. By convention, the System Controller is in slot number 1, and the remaining slots are numb… |
| 1.3.6.1.4.1.181.1.13.4.1.1.2 | slotDelAllConnections | 0 | 0 | Setting this variable to dontDeleteAll has no effect. Setting this variable to deleteAll causes all connections to or from any po… |
| 1.3.6.1.4.1.181.1.13.4.1.1.3 | slotPortMapping | 0 | 0 | The current mapping of the internal PM 'hardware resources' (e.g., VBR vs. CBR traffic support) to the actual PLM physical port c… |
| 1.3.6.1.4.1.181.1.13.4.1.1.4 | slotReset | 0 | 0 | Setting this variable to dontReset has no effect. Setting this variable to doReset causes the PM/PLM pair to be reset and restart… |
| 1.3.6.1.4.1.181.1.13.4.1.1.5 | slotPmId | 0 | 0 | The ID for the Protocol Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.6 | slotPmRevision | 0 | 0 | The hardware revision number for the Protocol Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.7 | slotPmSerialNum | 0 | 0 | The serial number for the Protocol Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.8 | slotPmName | 0 | 0 | The nomenclature for the Protocol Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.9 | slotPmCfgdId | 0 | 0 | The ID for the Protocol Module configuration currently held for this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.10 | slotPmCfgdName | 0 | 0 | The nomenclature for the Protocol Module whose configuration is currently held for this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.11 | slotPmStatus | 0 | 0 | This variable reports the current status of the specified Protocol Module slot. Definitions are as follows: empty PM s… |
| 1.3.6.1.4.1.181.1.13.4.1.1.13 | slotPlmRevision | 0 | 0 | The hardware revision number for the Physical Layer Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.14 | slotPlmSerialNum | 0 | 0 | The serial number for the Physical Layer Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.15 | slotPlmName | 0 | 0 | The nomenclature for the Physical Layer Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.16 | slotPlmCfgdId | 0 | 0 | The ID for the Physical Layer Module configuration currently held for this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.17 | slotPlmCfgdName | 0 | 0 | The nomenclature for the Physical Layer Module whose configuration is currently held for this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.18 | slotPlmStatus | 0 | 0 | This variable reports the current status of the specified Physical Layer Module slot. Definitions are as follows: empty … |
| 1.3.6.1.4.1.181.1.13.4.1.1.19 | slotModuleStatusLed | 0 | 0 | The state of PM module `Status' LED for this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.20 | slotTestLed | 0 | 0 | The state of PM module `Test' LED for this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.21 | slotPmCondition | 0 | 0 | The condition of the PM for this slot: pmReady The PM is ready. pmIndeterminate The PM is slot is empty, dead, or… |
| 1.3.6.1.4.1.181.1.13.4.1.1.22 | slotPlmCondition | 0 | 0 | The condition of the PLM for this slot: plmReady The PLM is ready. plmIndeterminate The PLM is slot is empty, dead,… |