The condition of the PLM for this slot:
plmReady The PLM is ready.
plmIndeterminate The PLM is slot is empty, dead, or
in another state which makes this
variable not meaningful.
plmInvalidUcode The PLM had detected missing or
invalid on-board firmware or microcode.
plmIncompatUcode The PLM has detected that the version
of firmware or microcode is
incompatible with the system software.
The value plmReady(1) is only reported when slotPlmStatus has
the value configured(6). The values plmInvalidUcode(3) and
plmIncompatUcode(4) are only when reported the slotPlmStatus
has the value down(12). The value plmIndeterminate(2) is
reported for all other values of slotPlmStatus.
Parsed from file CP300.mib.txt
Company: marconi
Module: AAC3-MIB
Vendor: ADC Kentrox
Module: AAC3-MIB (aac3-140.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
slotPlmCondition OBJECT-TYPE SYNTAX INTEGER { plmReady(1), plmIndeterminate(2), plmInvalidUcode(3), plmIncompatUcode(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The condition of the PLM for this slot: plmReady The PLM is ready. plmIndeterminate The PLM is slot is empty, dead, or in another state which makes this variable not meaningful. plmInvalidUcode The PLM had detected missing or invalid on-board firmware or microcode. plmIncompatUcode The PLM has detected that the version of firmware or microcode is incompatible with the system software. The value plmReady(1) is only reported when slotPlmStatus has the value configured(6). The values plmInvalidUcode(3) and plmIncompatUcode(4) are only when reported the slotPlmStatus has the value down(12). The value plmIndeterminate(2) is reported for all other values of slotPlmStatus." ::= { slotEntry 22 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.181.1.13.4.1.1.1 | slotIndex | 0 | 0 | The number associated with this slot. By convention, the System Controller is in slot number 1, and the remaining slots are numb… |
| 1.3.6.1.4.1.181.1.13.4.1.1.2 | slotDelAllConnections | 0 | 0 | Setting this variable to dontDeleteAll has no effect. Setting this variable to deleteAll causes all connections to or from any po… |
| 1.3.6.1.4.1.181.1.13.4.1.1.3 | slotPortMapping | 0 | 0 | The current mapping of the internal PM 'hardware resources' (e.g., VBR vs. CBR traffic support) to the actual PLM physical port c… |
| 1.3.6.1.4.1.181.1.13.4.1.1.4 | slotReset | 0 | 0 | Setting this variable to dontReset has no effect. Setting this variable to doReset causes the PM/PLM pair to be reset and restart… |
| 1.3.6.1.4.1.181.1.13.4.1.1.5 | slotPmId | 0 | 0 | The ID for the Protocol Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.6 | slotPmRevision | 0 | 0 | The hardware revision number for the Protocol Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.7 | slotPmSerialNum | 0 | 0 | The serial number for the Protocol Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.8 | slotPmName | 0 | 0 | The nomenclature for the Protocol Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.9 | slotPmCfgdId | 0 | 0 | The ID for the Protocol Module configuration currently held for this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.10 | slotPmCfgdName | 0 | 0 | The nomenclature for the Protocol Module whose configuration is currently held for this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.11 | slotPmStatus | 0 | 0 | This variable reports the current status of the specified Protocol Module slot. Definitions are as follows: empty PM s… |
| 1.3.6.1.4.1.181.1.13.4.1.1.12 | slotPlmId | 0 | 0 | The ID for the Physical Layer Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.13 | slotPlmRevision | 0 | 0 | The hardware revision number for the Physical Layer Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.14 | slotPlmSerialNum | 0 | 0 | The serial number for the Physical Layer Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.15 | slotPlmName | 0 | 0 | The nomenclature for the Physical Layer Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.16 | slotPlmCfgdId | 0 | 0 | The ID for the Physical Layer Module configuration currently held for this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.17 | slotPlmCfgdName | 0 | 0 | The nomenclature for the Physical Layer Module whose configuration is currently held for this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.18 | slotPlmStatus | 0 | 0 | This variable reports the current status of the specified Physical Layer Module slot. Definitions are as follows: empty … |
| 1.3.6.1.4.1.181.1.13.4.1.1.19 | slotModuleStatusLed | 0 | 0 | The state of PM module `Status' LED for this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.20 | slotTestLed | 0 | 0 | The state of PM module `Test' LED for this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.21 | slotPmCondition | 0 | 0 | The condition of the PM for this slot: pmReady The PM is ready. pmIndeterminate The PM is slot is empty, dead, or… |