Setting this variable to dontReset has no effect.
Setting this variable to doReset causes the PM/PLM pair to be
reset and restarted using the current configuration in force.
Setting this variable to doResetFactory causes the PM/PLM pair
to be reset and restarted using the factory defaults for the
PM and PLM types, and all connections to or from any port on
that slot to be deleted.
Setting this variable to doKill causes the system to consider
the PM/PLM pair DEAD and its connections are marked obsolete.
Parsed from file CP300.mib.txt
Company: marconi
Module: AAC3-MIB
Vendor: ADC Kentrox
Module: AAC3-MIB (aac3-140.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
slotReset OBJECT-TYPE SYNTAX INTEGER { dontReset(1), doReset(2), doResetFactory(3), doKill(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this variable to dontReset has no effect. Setting this variable to doReset causes the PM/PLM pair to be reset and restarted using the current configuration in force. Setting this variable to doResetFactory causes the PM/PLM pair to be reset and restarted using the factory defaults for the PM and PLM types, and all connections to or from any port on that slot to be deleted. Setting this variable to doKill causes the system to consider the PM/PLM pair DEAD and its connections are marked obsolete." ::= { slotEntry 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.181.1.13.4.1.1.1 | slotIndex | 0 | 0 | The number associated with this slot. By convention, the System Controller is in slot number 1, and the remaining slots are numb… |
| 1.3.6.1.4.1.181.1.13.4.1.1.2 | slotDelAllConnections | 0 | 0 | Setting this variable to dontDeleteAll has no effect. Setting this variable to deleteAll causes all connections to or from any po… |
| 1.3.6.1.4.1.181.1.13.4.1.1.3 | slotPortMapping | 0 | 0 | The current mapping of the internal PM 'hardware resources' (e.g., VBR vs. CBR traffic support) to the actual PLM physical port c… |
| 1.3.6.1.4.1.181.1.13.4.1.1.5 | slotPmId | 0 | 0 | The ID for the Protocol Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.6 | slotPmRevision | 0 | 0 | The hardware revision number for the Protocol Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.7 | slotPmSerialNum | 0 | 0 | The serial number for the Protocol Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.8 | slotPmName | 0 | 0 | The nomenclature for the Protocol Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.9 | slotPmCfgdId | 0 | 0 | The ID for the Protocol Module configuration currently held for this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.10 | slotPmCfgdName | 0 | 0 | The nomenclature for the Protocol Module whose configuration is currently held for this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.11 | slotPmStatus | 0 | 0 | This variable reports the current status of the specified Protocol Module slot. Definitions are as follows: empty PM s… |
| 1.3.6.1.4.1.181.1.13.4.1.1.12 | slotPlmId | 0 | 0 | The ID for the Physical Layer Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.13 | slotPlmRevision | 0 | 0 | The hardware revision number for the Physical Layer Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.14 | slotPlmSerialNum | 0 | 0 | The serial number for the Physical Layer Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.15 | slotPlmName | 0 | 0 | The nomenclature for the Physical Layer Module currently installed in this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.16 | slotPlmCfgdId | 0 | 0 | The ID for the Physical Layer Module configuration currently held for this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.17 | slotPlmCfgdName | 0 | 0 | The nomenclature for the Physical Layer Module whose configuration is currently held for this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.18 | slotPlmStatus | 0 | 0 | This variable reports the current status of the specified Physical Layer Module slot. Definitions are as follows: empty … |
| 1.3.6.1.4.1.181.1.13.4.1.1.19 | slotModuleStatusLed | 0 | 0 | The state of PM module `Status' LED for this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.20 | slotTestLed | 0 | 0 | The state of PM module `Test' LED for this slot. |
| 1.3.6.1.4.1.181.1.13.4.1.1.21 | slotPmCondition | 0 | 0 | The condition of the PM for this slot: pmReady The PM is ready. pmIndeterminate The PM is slot is empty, dead, or… |
| 1.3.6.1.4.1.181.1.13.4.1.1.22 | slotPlmCondition | 0 | 0 | The condition of the PLM for this slot: plmReady The PLM is ready. plmIndeterminate The PLM is slot is empty, dead,… |