This variable indicates the Line Status of the
interface. It contains loopback, failure, re-
ceived 'alarm' and transmitted 'alarm' infor-
mation.
NoAlarms
This variables indicates their is no alarms on
this port or this line.
Alarms
This variables indicates their is alarms on
line with any of the following bit map :
The ncmquadLineStatus is a bit map represented as a sum,
therefore, it can represent multiple failures (alarms) and
a LoopbackState simultaneously.
If the ncmquadLoopbackState bit is set, the loopback in ef-
fect can be determined from the ncmquadLoopbackConfig object.
The various bit positions are:
0 Reserved
1 quadCRC6error (1 = yes, 0 = no)
2 Reserved
3 FramingSlip (1 = yes, 0 = no)
4 quadRAI (1 = yes, 0 = no)
5 quadLOF LOF (1 = yes, 0 = no)
6 quadAIS AIS (1 = yes, 0 = no)
7 quadLOS LOS (1 = yes, 0 = no)
8~15 ReservedForOtherFailure
Parsed from file ncmquad.mib.txt
Company: None
Module: VERILINK-ENTERPRISE-NCMQUAD-MIB
This variable indicates the Line Status of the
interface. It contains loopback, failure, re-
ceived 'alarm' and transmitted 'alarm' infor-
mation.
NoAlarms
This variables indicates their is no alarms on
this port or this line.
Alarms
This variables indicates their is alarms on
line with any of the following bit map :
The ncmquadLineStatus is a bit map represented as a sum,
therefore, it can represent multiple failures (alarms) and
a LoopbackState simultaneously.
If the ncmquadLoopbackState bit is set, the loopback in ef-
fect can be determined from the ncmquadLoopbackConfig object.
The various bit positions are:
0 Reserved
1 quadCRC6error (1 = yes, 0 = no)
2 Reserved
3 FramingSlip (1 = yes, 0 = no)
4 quadRAI (1 = yes, 0 = no)
5 quadLOF LOF (1 = yes, 0 = no)
6 quadAIS AIS (1 = yes, 0 = no)
7 quadLOS LOS (1 = yes, 0 = no)
8~15 ReservedForOtherFailure
Parsed from file VERILINK-ENTERPRISE-NCMQUAD-MIB.mib
Module: VERILINK-ENTERPRISE-NCMQUAD-MIB
Vendor: Verilink Corp
Module: VERILINK-ENTERPRISE-NCMQUAD-MIB
[Automatically extracted from oidview.com]
ncmquadLineStatus OBJECT-TYPE SYNTAX INTEGER { noAlarms(1), alarms(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the Line Status of the interface. It contains loopback, failure, re- ceived 'alarm' and transmitted 'alarm' infor- mation. NoAlarms This variables indicates their is no alarms on this port or this line. Alarms This variables indicates their is alarms on line with any of the following bit map : The ncmquadLineStatus is a bit map represented as a sum, therefore, it can represent multiple failures (alarms) and a LoopbackState simultaneously. If the ncmquadLoopbackState bit is set, the loopback in ef- fect can be determined from the ncmquadLoopbackConfig object. The various bit positions are: 0 Reserved 1 quadCRC6error (1 = yes, 0 = no) 2 Reserved 3 FramingSlip (1 = yes, 0 = no) 4 quadRAI (1 = yes, 0 = no) 5 quadLOF LOF (1 = yes, 0 = no) 6 quadAIS AIS (1 = yes, 0 = no) 7 quadLOS LOS (1 = yes, 0 = no) 8~15 ReservedForOtherFailure " ::= { ncmquadConfigEntry 11 }
ncmquadLineStatus OBJECT-TYPE SYNTAX INTEGER { noAlarms(1), alarms(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable indicates the Line Status of the interface. It contains loopback, failure, re- ceived 'alarm' and transmitted 'alarm' infor- mation. NoAlarms This variables indicates their is no alarms on this port or this line. Alarms This variables indicates their is alarms on line with any of the following bit map : The ncmquadLineStatus is a bit map represented as a sum, therefore, it can represent multiple failures (alarms) and a LoopbackState simultaneously. If the ncmquadLoopbackState bit is set, the loopback in ef- fect can be determined from the ncmquadLoopbackConfig object. The various bit positions are: 0 Reserved 1 quadCRC6error (1 = yes, 0 = no) 2 Reserved 3 FramingSlip (1 = yes, 0 = no) 4 quadRAI (1 = yes, 0 = no) 5 quadLOF LOF (1 = yes, 0 = no) 6 quadAIS AIS (1 = yes, 0 = no) 7 quadLOS LOS (1 = yes, 0 = no) 8~15 ReservedForOtherFailure " ::= { ncmquadConfigEntry 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.321.1.3009.11000.1.1 | ncmquadLineIndex | 0 | 0 | This object is the identifier of a Inter- face on a managed device. If there is an ifEn- try that is directly associated with … |
| 1.3.6.1.4.1.321.1.3009.11000.1.2 | ncmquadIfIndex | 0 | 0 | This value for this object is equal to the value of ifIndex from the Interfaces table of MIB II (RFC 1213). |
| 1.3.6.1.4.1.321.1.3009.11000.1.3 | ncmquadEndId | 0 | 0 | This value for this object indicates which end of the equipment it is configuring. |
| 1.3.6.1.4.1.321.1.3009.11000.1.4 | ncmquadPort | 0 | 0 | This variable indicates Whether the port is in service or out of service |
| 1.3.6.1.4.1.321.1.3009.11000.1.5 | ncmquadLineType | 0 | 0 | This variable indicates the variety of Line implementing this circuit. The type of circuit affects the number of bits per… |
| 1.3.6.1.4.1.321.1.3009.11000.1.6 | ncmquadLineCoding | 0 | 0 | This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its chara… |
| 1.3.6.1.4.1.321.1.3009.11000.1.7 | ncmquadFDL | 0 | 0 | The variable specifies the Disable/Enable of the ncmfdl State. |
| 1.3.6.1.4.1.321.1.3009.11000.1.8 | ncmquadDensityPattern | 0 | 0 | This variable indicates what type of density network is being sent on the port or line by the device. The values mean : 'Disabled… |
| 1.3.6.1.4.1.321.1.3009.11000.1.9 | ncmquadNetworkLineBuildOut | 0 | 0 | This variable indicates the db rate at which the line or port using, i.e., is 0 , -7.5db, -15db or -22.5db.[pvt] |
| 1.3.6.1.4.1.321.1.3009.11000.1.10 | ncmquadNetworkLoopConfig | 0 | 0 | This variable represents whether the device can be configured throught the network for loopback. Here values mean : Disabled: This… |
| 1.3.6.1.4.1.321.1.3009.11000.1.12 | ncmquadLoopbackConfig | 0 | 0 | This variable represents the loopback confi- guration of the DS1 interface. Agents support- ing read/write access should retur… |
| 1.3.6.1.4.1.321.1.3009.11000.1.13 | ncmquadSendCode | 0 | 0 | This variable indicates what type of code is being sent across the DS1 interface by the dev- ice. The values mean: NoCode sendin… |
| 1.3.6.1.4.1.321.1.3009.11000.1.14 | ncmquadResetPerfReg | 0 | 0 | Reset Performance Monitoring registers. |
| 1.3.6.1.4.1.321.1.3009.11000.1.15 | ncmquadValidIntervals | 0 | 0 | The number of previous intervals for which valid data was collected. The value will be 96 unless the interface was brought o… |
| 1.3.6.1.4.1.321.1.3009.11000.1.16 | ncmquadTimeElapsed | 0 | 0 | The number of seconds that have elapsed since the beginning of the current error-measurement period. |
| 1.3.6.1.4.1.321.1.3009.11000.1.17 | ncmquadResetT1Error | 0 | 0 | This variable indicates the option for reseting the T1 error counters. |