This variable indicates the variety of
Line implementing this circuit. The type of
circuit affects the number of bits per second
that the circuit can reasonably carry, as well
as the interpretation of the usage and error
statistics. The values, in sequence, describe:
TITLE: SPECIFICATION:
ESF Extended SuperFrame DS1
D4 AT&T D4 format DS1
Parsed from file ncmquad.mib.txt
Company: None
Module: VERILINK-ENTERPRISE-NCMQUAD-MIB
This variable indicates the variety of
Line implementing this circuit. The type of
circuit affects the number of bits per second
that the circuit can reasonably carry, as well
as the interpretation of the usage and error
statistics. The values, in sequence, describe:
TITLE: SPECIFICATION:
ESF Extended SuperFrame DS1
D4 AT&T D4 format DS1
Parsed from file VERILINK-ENTERPRISE-NCMQUAD-MIB.mib
Module: VERILINK-ENTERPRISE-NCMQUAD-MIB
Vendor: Verilink Corp
Module: VERILINK-ENTERPRISE-NCMQUAD-MIB
[Automatically extracted from oidview.com]
ncmquadLineType OBJECT-TYPE SYNTAX INTEGER { other(1), eSF(2), d4(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the variety of Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reasonably carry, as well as the interpretation of the usage and error statistics. The values, in sequence, describe: TITLE: SPECIFICATION: ESF Extended SuperFrame DS1 D4 AT&T D4 format DS1" ::= { ncmquadConfigEntry 5 }
ncmquadLineType OBJECT-TYPE SYNTAX INTEGER { other(1), eSF(2), d4(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the variety of Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reasonably carry, as well as the interpretation of the usage and error statistics. The values, in sequence, describe: TITLE: SPECIFICATION: ESF Extended SuperFrame DS1 D4 AT&T D4 format DS1" ::= { ncmquadConfigEntry 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.321.1.3009.11000.1.1 | ncmquadLineIndex | 0 | 0 | This object is the identifier of a Inter- face on a managed device. If there is an ifEn- try that is directly associated with … |
| 1.3.6.1.4.1.321.1.3009.11000.1.2 | ncmquadIfIndex | 0 | 0 | This value for this object is equal to the value of ifIndex from the Interfaces table of MIB II (RFC 1213). |
| 1.3.6.1.4.1.321.1.3009.11000.1.3 | ncmquadEndId | 0 | 0 | This value for this object indicates which end of the equipment it is configuring. |
| 1.3.6.1.4.1.321.1.3009.11000.1.4 | ncmquadPort | 0 | 0 | This variable indicates Whether the port is in service or out of service |
| 1.3.6.1.4.1.321.1.3009.11000.1.6 | ncmquadLineCoding | 0 | 0 | This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its chara… |
| 1.3.6.1.4.1.321.1.3009.11000.1.7 | ncmquadFDL | 0 | 0 | The variable specifies the Disable/Enable of the ncmfdl State. |
| 1.3.6.1.4.1.321.1.3009.11000.1.8 | ncmquadDensityPattern | 0 | 0 | This variable indicates what type of density network is being sent on the port or line by the device. The values mean : 'Disabled… |
| 1.3.6.1.4.1.321.1.3009.11000.1.9 | ncmquadNetworkLineBuildOut | 0 | 0 | This variable indicates the db rate at which the line or port using, i.e., is 0 , -7.5db, -15db or -22.5db.[pvt] |
| 1.3.6.1.4.1.321.1.3009.11000.1.10 | ncmquadNetworkLoopConfig | 0 | 0 | This variable represents whether the device can be configured throught the network for loopback. Here values mean : Disabled: This… |
| 1.3.6.1.4.1.321.1.3009.11000.1.11 | ncmquadLineStatus | 0 | 0 | This variable indicates the Line Status of the interface. It contains loopback, failure, re- ceived 'alarm' and transmitted 'a… |
| 1.3.6.1.4.1.321.1.3009.11000.1.12 | ncmquadLoopbackConfig | 0 | 0 | This variable represents the loopback confi- guration of the DS1 interface. Agents support- ing read/write access should retur… |
| 1.3.6.1.4.1.321.1.3009.11000.1.13 | ncmquadSendCode | 0 | 0 | This variable indicates what type of code is being sent across the DS1 interface by the dev- ice. The values mean: NoCode sendin… |
| 1.3.6.1.4.1.321.1.3009.11000.1.14 | ncmquadResetPerfReg | 0 | 0 | Reset Performance Monitoring registers. |
| 1.3.6.1.4.1.321.1.3009.11000.1.15 | ncmquadValidIntervals | 0 | 0 | The number of previous intervals for which valid data was collected. The value will be 96 unless the interface was brought o… |
| 1.3.6.1.4.1.321.1.3009.11000.1.16 | ncmquadTimeElapsed | 0 | 0 | The number of seconds that have elapsed since the beginning of the current error-measurement period. |
| 1.3.6.1.4.1.321.1.3009.11000.1.17 | ncmquadResetT1Error | 0 | 0 | This variable indicates the option for reseting the T1 error counters. |