Enterprise Object ID that DC-ILMI will use in
building SNMP traps (or other generic MIB traps). This
parameter can be used to identify the originator of
the trap.
The Object ID is specified as an array of unsigned
long vals, as follows:
The first entry in the array is the length of the
array (the num of unsigned long values it contains,
including the len value).
The second entry in the array is an identifier
specifying the Family type of the Object ID. This reps
a prefix Object ID; the MIB Sub-Agent is responsible
for matching this id with the dotted-decimal notation
for this prefix.
The remainder of the array gives the index part of the
Object ID (the dotted-decimal notation from the end of
the Family), with 1 unsigned long for each decimal
number in this notation.
Parsed from file stn-atm.mib.txt
Company: None
Module: STN-ATM-MIB
Enterprise Object ID that DC-ILMI will use in
building SNMP traps (or other generic MIB traps). This
parameter can be used to identify the originator of
the trap.
The Object ID is specified as an array of unsigned
long vals, as follows:
The first entry in the array is the length of the
array (the num of unsigned long values it contains,
including the len value).
The second entry in the array is an identifier
specifying the Family type of the Object ID. This reps
a prefix Object ID; the MIB Sub-Agent is responsible
for matching this id with the dotted-decimal notation
for this prefix.
The remainder of the array gives the index part of the
Object ID (the dotted-decimal notation from the end of
the Family), with 1 unsigned long for each decimal
number in this notation.
Parsed from file STN-ATM-MIB.mib
Module: STN-ATM-MIB
Vendor: Spring Tide Networks, Inc.
Module: STN-ATM-MIB
[Automatically extracted from oidview.com]
stnAtmPortIlmiEnterprise OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "Enterprise Object ID that DC-ILMI will use in building SNMP traps (or other generic MIB traps). This parameter can be used to identify the originator of the trap. The Object ID is specified as an array of unsigned long vals, as follows: The first entry in the array is the length of the array (the num of unsigned long values it contains, including the len value). The second entry in the array is an identifier specifying the Family type of the Object ID. This reps a prefix Object ID; the MIB Sub-Agent is responsible for matching this id with the dotted-decimal notation for this prefix. The remainder of the array gives the index part of the Object ID (the dotted-decimal notation from the end of the Family), with 1 unsigned long for each decimal number in this notation." ::= { stnAtmPortIlmiEntry 10 }
stnAtmPortIlmiEnterprise OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "Enterprise Object ID that DC-ILMI will use in building SNMP traps (or other generic MIB traps). This parameter can be used to identify the originator of the trap. The Object ID is specified as an array of unsigned long vals, as follows: The first entry in the array is the length of the array (the num of unsigned long values it contains, including the len value). The second entry in the array is an identifier specifying the Family type of the Object ID. This reps a prefix Object ID; the MIB Sub-Agent is responsible for matching this id with the dotted-decimal notation for this prefix. The remainder of the array gives the index part of the Object ID (the dotted-decimal notation from the end of the Family), with 1 unsigned long for each decimal number in this notation." ::= { stnAtmPortIlmiEntry 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.1 | stnAtmPortIlmiIfIndex | 0 | 0 | The interface index represents a connection point on the switch fabric from a module or line card. It is calculated based on the … |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.2 | stnAtmPortIlmiVersion | 0 | 0 | Specifies the signaling stack protocol type to be used on this port. Valid options are: uni-3-dot-0 uni-3-dot-1 uni-4-dot-0 iisp-3-d… |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.3 | stnAtmPortIlmiNetworkOrientation | 0 | 0 | Specifies the ATM device type. Valid options are: user, network |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.4 | stnAtmPortIlmiAutoNegotiate | 0 | 0 | Indicates ILMI auto negotiation mode |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.5 | stnAtmPortIlmiPollInterval | 0 | 0 | ILMI connection poll interval (S) in seconds. When DC-ILMI is transmitting SNMP Get messages during the attempt to establish conn… |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.6 | stnAtmPortIlmiCheckConnectionInt | 0 | 0 | ILMI check connection poll interval (T) in seconds. If connectivity checking is enabled (as spec by the value connect in the Admi… |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.7 | stnAtmPortIlmiInactivityFactor | 0 | 0 | ILMI inactivity factor (K). The number of consecutive polls for which no response is received from the remote ILMI component befo… |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.8 | stnAtmPortIlmiLocalConn | 0 | 0 | Specifies whether the local end of the ILMI connection is advertised as a 'public' or 'private' ILMI device. Values are: other, pub… |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.9 | stnAtmPortIlmiAdminStatus | 0 | 0 | Specifies which functions of DC-ILMI are enabled. The value std-ilmi must be specified; this value may be combined (using a bitwi… |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.11 | stnAtmPortIlmiLocalOid | 0 | 0 | Object ID identifying the local machine - the first 4 octets indicate the length of the object id. For example, the null object … |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.12 | stnAtmPortIlmiNetPrefix | 0 | 0 | Default network prefix. If the prefix length is non-zero, ILMI creates an entry in the ILMI NetPrefix Table for this prefix; othe… |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.13 | stnAtmPortIlmiPrefixLen | 0 | 0 | The length of the default network prefix |