ILMI connection poll interval (S) in seconds. When
DC-ILMI is transmitting SNMP Get messages during the
attempt to establish connectivity with the remote ILMI
component, this parameter determines the time in
seconds between transmissions. The default value is
from the ATM Forum ILMI Specification Version 4.0:
ILMI Connectivity Procedures (section 8.3.1).
Parsed from file stn-atm.mib.txt
Company: None
Module: STN-ATM-MIB
ILMI connection poll interval (S) in seconds. When
DC-ILMI is transmitting SNMP Get messages during the
attempt to establish connectivity with the remote ILMI
component, this parameter determines the time in
seconds between transmissions. The default value is
from the ATM Forum ILMI Specification Version 4.0:
ILMI Connectivity Procedures (section 8.3.1).
Parsed from file STN-ATM-MIB.mib
Module: STN-ATM-MIB
Vendor: Spring Tide Networks, Inc.
Module: STN-ATM-MIB
[Automatically extracted from oidview.com]
stnAtmPortIlmiPollInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "ILMI connection poll interval (S) in seconds. When DC-ILMI is transmitting SNMP Get messages during the attempt to establish connectivity with the remote ILMI component, this parameter determines the time in seconds between transmissions. The default value is from the ATM Forum ILMI Specification Version 4.0: ILMI Connectivity Procedures (section 8.3.1)." DEFVAL { 1 } ::= { stnAtmPortIlmiEntry 5 }
stnAtmPortIlmiPollInterval OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "ILMI connection poll interval (S) in seconds. When DC-ILMI is transmitting SNMP Get messages during the attempt to establish connectivity with the remote ILMI component, this parameter determines the time in seconds between transmissions. The default value is from the ATM Forum ILMI Specification Version 4.0: ILMI Connectivity Procedures (section 8.3.1)." DEFVAL { 1 } ::= { stnAtmPortIlmiEntry 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.1 | stnAtmPortIlmiIfIndex | 0 | 0 | The interface index represents a connection point on the switch fabric from a module or line card. It is calculated based on the … |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.2 | stnAtmPortIlmiVersion | 0 | 0 | Specifies the signaling stack protocol type to be used on this port. Valid options are: uni-3-dot-0 uni-3-dot-1 uni-4-dot-0 iisp-3-d… |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.3 | stnAtmPortIlmiNetworkOrientation | 0 | 0 | Specifies the ATM device type. Valid options are: user, network |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.4 | stnAtmPortIlmiAutoNegotiate | 0 | 0 | Indicates ILMI auto negotiation mode |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.6 | stnAtmPortIlmiCheckConnectionInt | 0 | 0 | ILMI check connection poll interval (T) in seconds. If connectivity checking is enabled (as spec by the value connect in the Admi… |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.7 | stnAtmPortIlmiInactivityFactor | 0 | 0 | ILMI inactivity factor (K). The number of consecutive polls for which no response is received from the remote ILMI component befo… |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.8 | stnAtmPortIlmiLocalConn | 0 | 0 | Specifies whether the local end of the ILMI connection is advertised as a 'public' or 'private' ILMI device. Values are: other, pub… |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.9 | stnAtmPortIlmiAdminStatus | 0 | 0 | Specifies which functions of DC-ILMI are enabled. The value std-ilmi must be specified; this value may be combined (using a bitwi… |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.10 | stnAtmPortIlmiEnterprise | 0 | 0 | Enterprise Object ID that DC-ILMI will use in building SNMP traps (or other generic MIB traps). This parameter can be used to ide… |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.11 | stnAtmPortIlmiLocalOid | 0 | 0 | Object ID identifying the local machine - the first 4 octets indicate the length of the object id. For example, the null object … |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.12 | stnAtmPortIlmiNetPrefix | 0 | 0 | Default network prefix. If the prefix length is non-zero, ILMI creates an entry in the ILMI NetPrefix Table for this prefix; othe… |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.13 | stnAtmPortIlmiPrefixLen | 0 | 0 | The length of the default network prefix |