The length of the default network prefix
Parsed from file stn-atm.mib.txt
Company: None
Module: STN-ATM-MIB
The length of the default network prefix
Parsed from file STN-ATM-MIB.mib
Module: STN-ATM-MIB
Vendor: Spring Tide Networks, Inc.
Module: STN-ATM-MIB
[Automatically extracted from oidview.com]
stnAtmPortIlmiPrefixLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The length of the default network prefix" ::= { stnAtmPortIlmiEntry 13 }
stnAtmPortIlmiPrefixLen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The length of the default network prefix" ::= { stnAtmPortIlmiEntry 13 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.1 | stnAtmPortIlmiIfIndex | 0 | 0 | The interface index represents a connection point on the switch fabric from a module or line card. It is calculated based on the … |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.2 | stnAtmPortIlmiVersion | 0 | 0 | Specifies the signaling stack protocol type to be used on this port. Valid options are: uni-3-dot-0 uni-3-dot-1 uni-4-dot-0 iisp-3-d… |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.3 | stnAtmPortIlmiNetworkOrientation | 0 | 0 | Specifies the ATM device type. Valid options are: user, network |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.4 | stnAtmPortIlmiAutoNegotiate | 0 | 0 | Indicates ILMI auto negotiation mode |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.5 | stnAtmPortIlmiPollInterval | 0 | 0 | ILMI connection poll interval (S) in seconds. When DC-ILMI is transmitting SNMP Get messages during the attempt to establish conn… |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.6 | stnAtmPortIlmiCheckConnectionInt | 0 | 0 | ILMI check connection poll interval (T) in seconds. If connectivity checking is enabled (as spec by the value connect in the Admi… |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.7 | stnAtmPortIlmiInactivityFactor | 0 | 0 | ILMI inactivity factor (K). The number of consecutive polls for which no response is received from the remote ILMI component befo… |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.8 | stnAtmPortIlmiLocalConn | 0 | 0 | Specifies whether the local end of the ILMI connection is advertised as a 'public' or 'private' ILMI device. Values are: other, pub… |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.9 | stnAtmPortIlmiAdminStatus | 0 | 0 | Specifies which functions of DC-ILMI are enabled. The value std-ilmi must be specified; this value may be combined (using a bitwi… |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.10 | stnAtmPortIlmiEnterprise | 0 | 0 | Enterprise Object ID that DC-ILMI will use in building SNMP traps (or other generic MIB traps). This parameter can be used to ide… |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.11 | stnAtmPortIlmiLocalOid | 0 | 0 | Object ID identifying the local machine - the first 4 octets indicate the length of the object id. For example, the null object … |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.12 | stnAtmPortIlmiNetPrefix | 0 | 0 | Default network prefix. If the prefix length is non-zero, ILMI creates an entry in the ILMI NetPrefix Table for this prefix; othe… |