Object ID identifying the local machine - the first
4 octets indicate the length of the object id. For
example, the null object id (0.0), which should be
used if no object id is specified, is encoded as
3, 0, 0.
Parsed from file stn-atm.mib.txt
Company: None
Module: STN-ATM-MIB
Object ID identifying the local machine - the first
4 octets indicate the length of the object id. For
example, the null object id (0.0), which should be
used if no object id is specified, is encoded as
3, 0, 0.
Parsed from file STN-ATM-MIB.mib
Module: STN-ATM-MIB
Vendor: Spring Tide Networks, Inc.
Module: STN-ATM-MIB
[Automatically extracted from oidview.com]
stnAtmPortIlmiLocalOid OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "Object ID identifying the local machine - the first 4 octets indicate the length of the object id. For example, the null object id (0.0), which should be used if no object id is specified, is encoded as 3, 0, 0." ::= { stnAtmPortIlmiEntry 11 }
stnAtmPortIlmiLocalOid OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-only STATUS current DESCRIPTION "Object ID identifying the local machine - the first 4 octets indicate the length of the object id. For example, the null object id (0.0), which should be used if no object id is specified, is encoded as 3, 0, 0." ::= { stnAtmPortIlmiEntry 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.1 | stnAtmPortIlmiIfIndex | 0 | 0 | The interface index represents a connection point on the switch fabric from a module or line card. It is calculated based on the … |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.2 | stnAtmPortIlmiVersion | 0 | 0 | Specifies the signaling stack protocol type to be used on this port. Valid options are: uni-3-dot-0 uni-3-dot-1 uni-4-dot-0 iisp-3-d… |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.3 | stnAtmPortIlmiNetworkOrientation | 0 | 0 | Specifies the ATM device type. Valid options are: user, network |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.4 | stnAtmPortIlmiAutoNegotiate | 0 | 0 | Indicates ILMI auto negotiation mode |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.5 | stnAtmPortIlmiPollInterval | 0 | 0 | ILMI connection poll interval (S) in seconds. When DC-ILMI is transmitting SNMP Get messages during the attempt to establish conn… |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.6 | stnAtmPortIlmiCheckConnectionInt | 0 | 0 | ILMI check connection poll interval (T) in seconds. If connectivity checking is enabled (as spec by the value connect in the Admi… |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.7 | stnAtmPortIlmiInactivityFactor | 0 | 0 | ILMI inactivity factor (K). The number of consecutive polls for which no response is received from the remote ILMI component befo… |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.8 | stnAtmPortIlmiLocalConn | 0 | 0 | Specifies whether the local end of the ILMI connection is advertised as a 'public' or 'private' ILMI device. Values are: other, pub… |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.9 | stnAtmPortIlmiAdminStatus | 0 | 0 | Specifies which functions of DC-ILMI are enabled. The value std-ilmi must be specified; this value may be combined (using a bitwi… |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.10 | stnAtmPortIlmiEnterprise | 0 | 0 | Enterprise Object ID that DC-ILMI will use in building SNMP traps (or other generic MIB traps). This parameter can be used to ide… |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.12 | stnAtmPortIlmiNetPrefix | 0 | 0 | Default network prefix. If the prefix length is non-zero, ILMI creates an entry in the ILMI NetPrefix Table for this prefix; othe… |
| 1.3.6.1.4.1.3551.2.6.1.4.2.1.1.13 | stnAtmPortIlmiPrefixLen | 0 | 0 | The length of the default network prefix |