prConStackPktRateControl OBJECT-TYPE
SYNTAX INTEGER { notApplicable (1),
disable (2),
limitUnknownDAs (3),
limitMcasts (4),
limitMcastsAndUnknownDAs (5),
limitBcasts (6),
limitBcastsAndUnknownDAs (7),
limitBcastsAndMcasts (8),
limitBcastsMcastsAndUnknownDAs (9)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "This object controls whether the packet rate control
feature is enabled or disabled. Products which do
not support this feature will return notApplicable(1)
and reject any attempt to set it to a different value.
When set to disable(2) the switch will not perform any
rate limiting. If set to any of the remaining values the
switch will monitor the throughput of the specified type(s)
of frame and discard some if necessary to reduce the
throughput to the amount specified by the value of
prConStackPktRateLimit. The enumerations select which
types of packet are to be rate limited as follows:-
limitUnknownDAs(3) Unicast Frames with a
destination address not in
the filtering database
limitMcasts(4) Multicasts
limitMcastsAndUnknownDAs(5) Multicasts, and unicasts
with unknown destination
addresses
limitBcasts(6) Broadcasts
limitBcastsAndUnknownDAs(7) Broadcasts, and unicasts
with unknown destination
addresses
limitMcastsAndBcasts(8) Multicasts and Broadcasts
limitMcastsBcastsAndUnknownDAs(9) All the above types of
frame"
View at oid-info.com
This object controls whether the packet rate control feature is
enabled or disabled. Products which do not support this feature
will return notApplicable(1) and reject any attempt to set it
to a different value. When set to disable(2) the switch will
not perform any rate limiting. If set to any of the remaining
values the switch will monitor the throughput of the specified
type(s) of frame and discard some if necessary to reduce the
throughput to the amount specified by the value of
prConStackPktRateLimit. The enumerations select which types of
packet are to be rate limited as follows:-
limitUnknownDAs(3)
Unicast Frames with a destination address not in the
filtering database
limitMcasts(4)
Multicasts
limitMcastsAndUnknownDAs(5)
Multicasts, and unicasts with unknown destination
addresses
limitBcasts(6)
Broadcasts
limitBcastsAndUnknownDAs(7)
Broadcasts, and unicasts with unknown destination
addresses
limitMcastsAndBcasts(8)
Multicasts and Broadcasts
limitMcastsBcastsAndUnknownDAs(9)
All the above types of frame
Parsed from file 3COM0420.MIB.txt
Company: a3com
Module: A3COM0420-SWITCH-EXTENSIONS
Automatically extracted from a file named S3M_AGENT
prConStackPktRateControl OBJECT-TYPE SYNTAX INTEGER { notApplicable(1), disable(2), limitUnknownDAs(3), limitMcasts(4), limitMcastsAndUnknownDAs(5), limitBcasts(6), limitBcastsAndUnknownDAs(7), limitBcastsAndMcasts(8), limitBcastsMcastsAndUnknownDAs(9) } ACCESS read-write STATUS mandatory DESCRIPTION "This object controls whether the packet rate control feature is enabled or disabled. Products which do not support this feature will return notApplicable(1) and reject any attempt to set it to a different value. When set to disable(2) the switch will not perform any rate limiting. If set to any of the remaining values the switch will monitor the throughput of the specified type(s) of frame and discard some if necessary to reduce the throughput to the amount specified by the value of prConStackPktRateLimit. The enumerations select which types of packet are to be rate limited as follows:- limitUnknownDAs(3) Unicast Frames with a destination address not in the filtering database limitMcasts(4) Multicasts limitMcastsAndUnknownDAs(5) Multicasts, and unicasts with unknown destination addresses limitBcasts(6) Broadcasts limitBcastsAndUnknownDAs(7) Broadcasts, and unicasts with unknown destination addresses limitMcastsAndBcasts(8) Multicasts and Broadcasts limitMcastsBcastsAndUnknownDAs(9) All the above types of frame" ::= { stackConfigGroup 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.10.34.1.10.0 | prConStackPktRateControl | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.10.34.1.1 | prConStackFwdingMode | 1 | 1 | This object controls whether cut-thru is enabled on the stack. Enabling cut-through can help to minimise the delay experienced by… |
| 1.3.6.1.4.1.43.10.34.1.2 | prConStackPaceMode | 1 | 1 | This object specifies the type of backoff algorithm used on the units in the stack. Any suitable port can use the standard ethern… |
| 1.3.6.1.4.1.43.10.34.1.3 | prConStackVLANConfigMode | 1 | 1 | This object specifies the VLAN mode to be used. Setting it to portMode(2) requires the user to configure each port's VLAN members… |
| 1.3.6.1.4.1.43.10.34.1.4 | prConStackRAPStudyPort | 1 | 1 | This determines the ifIndex of the port a user wishes to monitor on the copy port. Monitoring causes all data from the study por… |
| 1.3.6.1.4.1.43.10.34.1.5 | prConStackRAPCopyPort | 1 | 1 | This is the value of ifIndex specifying the port to which data will be copied (mirrored), and must be set to a valid value, along… |
| 1.3.6.1.4.1.43.10.34.1.6 | prConStackRAPEnable | 1 | 1 | This object controls the Roving Analysis Port (RAP) feature in conjunction with prConStackRAPStudyPort and prConStackRAPCopyPort.… |
| 1.3.6.1.4.1.43.10.34.1.7 | prConStackBridgeMode | 1 | 1 | prConStackBridgeMode OBJECT-TYPE SYNTAX INTEGER { single (1), multiple (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The… |
| 1.3.6.1.4.1.43.10.34.1.9 | prConStackIpTos | 1 | 1 | This object is used to enable the classification of packets based upon the value of their IPToS field. When enabled, the packet's… |
| 1.3.6.1.4.1.43.10.34.1.11 | prConStackPktRateLimit | 1 | 1 | This object specifies the maximum rate at which the selected types of packet may be received from a port before excess packets ar… |
| 1.3.6.1.4.1.43.10.34.1.12 | prConStackStpProtocolVersion | 1 | 1 | The version of the Spanning Tree Protocol that is to be used by this Bridge. stpVersion0(0) The original version of Spanning… |
| 1.3.6.1.4.1.43.10.34.1.13 | prConStackStpPathCostDefault | 1 | 1 | The version of the Spanning Tree default Path Costs that are to be used by this Bridge. stp8021d1998(1) Path Costs from IEEE … |
| 1.3.6.1.4.1.43.10.34.1.14 | prConStackLacpOperInfo | 1 | 1 | This object shall contain a value indicating that LACP is operational, or not operational. If not operational, all units need to … |
| 1.3.6.1.4.1.43.10.34.1.15 | prConStackFastLeaveEnabled | 0 | 0 | prConStackFastLeaveEnabled OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This ob… |
| 1.3.6.1.4.1.43.10.34.1.16 | prConStackQueueServicingOper | 0 | 0 | prConStackQueueServicingOper OBJECT-TYPE SYNTAX prConStackQueueServicingMode ACCESS read-only STATUS mandatory DESCRIPTION "Thi… |
| 1.3.6.1.4.1.43.10.34.1.17 | prConStackQueueServicingAdmin | 0 | 0 | prConStackQueueServicingAdmin OBJECT-TYPE SYNTAX prConStackQueueServicingMode ACCESS read-write STATUS mandatory DESCRIPTION "T… |