prConStackRAPEnable OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object controls the Roving Analysis Port (RAP) feature
in conjunction with prConStackRAPStudyPort and
prConStackRAPCopyPort. The RAP feature allows all frames sent
and received on the study port to be copied to the copy port,
where they can be observed. Setting this object to on(2) will
enable monitoring. To succeed both prConStackRAPStudyPort and
prConStackRAPCopyPort must have been set to the ifIndex values
of suitable ports, and if either are invalid this operation
will fail."
View at oid-info.com
This object controls the Roving Analysis Port (RAP) feature in
conjunction with prConStackRAPStudyPort and
prConStackRAPCopyPort. The RAP feature allows all frames sent
and received on the study port to be copied to the copy port,
where they can be observed. Setting this object to on(2) will
enable monitoring. To succeed both prConStackRAPStudyPort and
prConStackRAPCopyPort must have been set to the ifIndex values
of suitable ports, and if either are invalid this operation will
fail.
Parsed from file 3COM0420.MIB.txt
Company: a3com
Module: A3COM0420-SWITCH-EXTENSIONS
Automatically extracted from a file named S3M_AGENT
prConStackRAPEnable OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object controls the Roving Analysis Port (RAP) feature in conjunction with prConStackRAPStudyPort and prConStackRAPCopyPort. The RAP feature allows all frames sent and received on the study port to be copied to the copy port, where they can be observed. Setting this object to on(2) will enable monitoring. To succeed both prConStackRAPStudyPort and prConStackRAPCopyPort must have been set to the ifIndex values of suitable ports, and if either are invalid this operation will fail." ::= { stackConfigGroup 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.10.34.1.6.0 | prConStackRAPEnable | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.10.34.1.1 | prConStackFwdingMode | 1 | 1 | This object controls whether cut-thru is enabled on the stack. Enabling cut-through can help to minimise the delay experienced by… |
| 1.3.6.1.4.1.43.10.34.1.2 | prConStackPaceMode | 1 | 1 | This object specifies the type of backoff algorithm used on the units in the stack. Any suitable port can use the standard ethern… |
| 1.3.6.1.4.1.43.10.34.1.3 | prConStackVLANConfigMode | 1 | 1 | This object specifies the VLAN mode to be used. Setting it to portMode(2) requires the user to configure each port's VLAN members… |
| 1.3.6.1.4.1.43.10.34.1.4 | prConStackRAPStudyPort | 1 | 1 | This determines the ifIndex of the port a user wishes to monitor on the copy port. Monitoring causes all data from the study por… |
| 1.3.6.1.4.1.43.10.34.1.5 | prConStackRAPCopyPort | 1 | 1 | This is the value of ifIndex specifying the port to which data will be copied (mirrored), and must be set to a valid value, along… |
| 1.3.6.1.4.1.43.10.34.1.7 | prConStackBridgeMode | 1 | 1 | prConStackBridgeMode OBJECT-TYPE SYNTAX INTEGER { single (1), multiple (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The… |
| 1.3.6.1.4.1.43.10.34.1.9 | prConStackIpTos | 1 | 1 | This object is used to enable the classification of packets based upon the value of their IPToS field. When enabled, the packet's… |
| 1.3.6.1.4.1.43.10.34.1.10 | prConStackPktRateControl | 1 | 1 | This object controls whether the packet rate control feature is enabled or disabled. Products which do not support this feature… |
| 1.3.6.1.4.1.43.10.34.1.11 | prConStackPktRateLimit | 1 | 1 | This object specifies the maximum rate at which the selected types of packet may be received from a port before excess packets ar… |
| 1.3.6.1.4.1.43.10.34.1.12 | prConStackStpProtocolVersion | 1 | 1 | The version of the Spanning Tree Protocol that is to be used by this Bridge. stpVersion0(0) The original version of Spanning… |
| 1.3.6.1.4.1.43.10.34.1.13 | prConStackStpPathCostDefault | 1 | 1 | The version of the Spanning Tree default Path Costs that are to be used by this Bridge. stp8021d1998(1) Path Costs from IEEE … |
| 1.3.6.1.4.1.43.10.34.1.14 | prConStackLacpOperInfo | 1 | 1 | This object shall contain a value indicating that LACP is operational, or not operational. If not operational, all units need to … |
| 1.3.6.1.4.1.43.10.34.1.15 | prConStackFastLeaveEnabled | 0 | 0 | prConStackFastLeaveEnabled OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This ob… |
| 1.3.6.1.4.1.43.10.34.1.16 | prConStackQueueServicingOper | 0 | 0 | prConStackQueueServicingOper OBJECT-TYPE SYNTAX prConStackQueueServicingMode ACCESS read-only STATUS mandatory DESCRIPTION "Thi… |
| 1.3.6.1.4.1.43.10.34.1.17 | prConStackQueueServicingAdmin | 0 | 0 | prConStackQueueServicingAdmin OBJECT-TYPE SYNTAX prConStackQueueServicingMode ACCESS read-write STATUS mandatory DESCRIPTION "T… |