prConStackRAPStudyPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This determines the ifIndex of the port a user wishes to
monitor on the copy port. Monitoring causes all data from the
study port to be copied to the copy port. The port is
specified using its ifIndex because that uniquely identifies a
single port in the stack."
View at oid-info.com
This determines the ifIndex of the port a user wishes to
monitor on the copy port. Monitoring causes all data from the
study port to be copied to the copy port. The port is specified
using its ifIndex because that uniquely identifies a single port
in the stack.
Parsed from file 3COM0420.MIB.txt
Company: a3com
Module: A3COM0420-SWITCH-EXTENSIONS
Automatically extracted from a file named S3M_AGENT
prConStackRAPStudyPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This determines the ifIndex of the port a user wishes to monitor on the copy port. Monitoring causes all data from the study port to be copied to the copy port. The port is specified using its ifIndex because that uniquely identifies a single port in the stack." ::= { stackConfigGroup 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.10.34.1.4.0 | prConStackRAPStudyPort | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.10.34.1.1 | prConStackFwdingMode | 1 | 1 | This object controls whether cut-thru is enabled on the stack. Enabling cut-through can help to minimise the delay experienced by… |
| 1.3.6.1.4.1.43.10.34.1.2 | prConStackPaceMode | 1 | 1 | This object specifies the type of backoff algorithm used on the units in the stack. Any suitable port can use the standard ethern… |
| 1.3.6.1.4.1.43.10.34.1.3 | prConStackVLANConfigMode | 1 | 1 | This object specifies the VLAN mode to be used. Setting it to portMode(2) requires the user to configure each port's VLAN members… |
| 1.3.6.1.4.1.43.10.34.1.5 | prConStackRAPCopyPort | 1 | 1 | This is the value of ifIndex specifying the port to which data will be copied (mirrored), and must be set to a valid value, along… |
| 1.3.6.1.4.1.43.10.34.1.6 | prConStackRAPEnable | 1 | 1 | This object controls the Roving Analysis Port (RAP) feature in conjunction with prConStackRAPStudyPort and prConStackRAPCopyPort.… |
| 1.3.6.1.4.1.43.10.34.1.7 | prConStackBridgeMode | 1 | 1 | prConStackBridgeMode OBJECT-TYPE SYNTAX INTEGER { single (1), multiple (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The… |
| 1.3.6.1.4.1.43.10.34.1.9 | prConStackIpTos | 1 | 1 | This object is used to enable the classification of packets based upon the value of their IPToS field. When enabled, the packet's… |
| 1.3.6.1.4.1.43.10.34.1.10 | prConStackPktRateControl | 1 | 1 | This object controls whether the packet rate control feature is enabled or disabled. Products which do not support this feature… |
| 1.3.6.1.4.1.43.10.34.1.11 | prConStackPktRateLimit | 1 | 1 | This object specifies the maximum rate at which the selected types of packet may be received from a port before excess packets ar… |
| 1.3.6.1.4.1.43.10.34.1.12 | prConStackStpProtocolVersion | 1 | 1 | The version of the Spanning Tree Protocol that is to be used by this Bridge. stpVersion0(0) The original version of Spanning… |
| 1.3.6.1.4.1.43.10.34.1.13 | prConStackStpPathCostDefault | 1 | 1 | The version of the Spanning Tree default Path Costs that are to be used by this Bridge. stp8021d1998(1) Path Costs from IEEE … |
| 1.3.6.1.4.1.43.10.34.1.14 | prConStackLacpOperInfo | 1 | 1 | This object shall contain a value indicating that LACP is operational, or not operational. If not operational, all units need to … |
| 1.3.6.1.4.1.43.10.34.1.15 | prConStackFastLeaveEnabled | 0 | 0 | prConStackFastLeaveEnabled OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This ob… |
| 1.3.6.1.4.1.43.10.34.1.16 | prConStackQueueServicingOper | 0 | 0 | prConStackQueueServicingOper OBJECT-TYPE SYNTAX prConStackQueueServicingMode ACCESS read-only STATUS mandatory DESCRIPTION "Thi… |
| 1.3.6.1.4.1.43.10.34.1.17 | prConStackQueueServicingAdmin | 0 | 0 | prConStackQueueServicingAdmin OBJECT-TYPE SYNTAX prConStackQueueServicingMode ACCESS read-write STATUS mandatory DESCRIPTION "T… |