prConStackVLANConfigMode OBJECT-TYPE
SYNTAX INTEGER {
notApplicable (1),
portMode (2),
autoSelect (3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "This object specifies the VLAN mode to be used. Setting it
to portMode(2) requires the user to configure each ports VLAN
membership individually, whereas autoSelect(3) causes it to acquire
its membership from the VLAN Server. The value of this object defines
the setting that those ports will use which have
prConPortVLANConfigMode set to useDefault(2).
VLAN mode can be set for the whole stack or for individual ports. When
a unit is initialised to factory defaults, prconPortVLANConfigMode for
every port is set to useDefault(2), and the actual setting for the
port is decided by the value of this object. The manager has the choice,
therefore, of varying the mode for every port in the stack, or for
individual ports only."
View at oid-info.com
This object specifies the VLAN mode to be used. Setting it to
portMode(2) requires the user to configure each port's VLAN
membership individually, whereas autoSelect(3) causes it to
acquire its membership from the VLAN Server. The value of this
object defines the setting that those ports will use which have
prConPortVLANConfigMode set to useDefault(2).
VLAN mode can be set for the whole stack or for individual
ports. When a unit is initialised to factory defaults,
prconPortVLANConfigMode for every port is set to useDefault(2),
and the actual setting for the port is decided by the value of
this object. The manager has the choice, therefore, of varying
the mode for every port in the stack, or for individual ports
only.
Parsed from file 3COM0420.MIB.txt
Company: a3com
Module: A3COM0420-SWITCH-EXTENSIONS
Automatically extracted from a file named S3M_AGENT
prConStackVLANConfigMode OBJECT-TYPE SYNTAX INTEGER { notApplicable(1), portMode(2), autoSelect(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the VLAN mode to be used. Setting it to portMode(2) requires the user to configure each port's VLAN membership individually, whereas autoSelect(3) causes it to acquire its membership from the VLAN Server. The value of this object defines the setting that those ports will use which have prConPortVLANConfigMode set to useDefault(2). VLAN mode can be set for the whole stack or for individual ports. When a unit is initialised to factory defaults, prconPortVLANConfigMode for every port is set to useDefault(2), and the actual setting for the port is decided by the value of this object. The manager has the choice, therefore, of varying the mode for every port in the stack, or for individual ports only." ::= { stackConfigGroup 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.10.34.1.3.0 | prConStackVLANConfigMode | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.10.34.1.1 | prConStackFwdingMode | 1 | 1 | This object controls whether cut-thru is enabled on the stack. Enabling cut-through can help to minimise the delay experienced by… |
| 1.3.6.1.4.1.43.10.34.1.2 | prConStackPaceMode | 1 | 1 | This object specifies the type of backoff algorithm used on the units in the stack. Any suitable port can use the standard ethern… |
| 1.3.6.1.4.1.43.10.34.1.4 | prConStackRAPStudyPort | 1 | 1 | This determines the ifIndex of the port a user wishes to monitor on the copy port. Monitoring causes all data from the study por… |
| 1.3.6.1.4.1.43.10.34.1.5 | prConStackRAPCopyPort | 1 | 1 | This is the value of ifIndex specifying the port to which data will be copied (mirrored), and must be set to a valid value, along… |
| 1.3.6.1.4.1.43.10.34.1.6 | prConStackRAPEnable | 1 | 1 | This object controls the Roving Analysis Port (RAP) feature in conjunction with prConStackRAPStudyPort and prConStackRAPCopyPort.… |
| 1.3.6.1.4.1.43.10.34.1.7 | prConStackBridgeMode | 1 | 1 | prConStackBridgeMode OBJECT-TYPE SYNTAX INTEGER { single (1), multiple (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The… |
| 1.3.6.1.4.1.43.10.34.1.9 | prConStackIpTos | 1 | 1 | This object is used to enable the classification of packets based upon the value of their IPToS field. When enabled, the packet's… |
| 1.3.6.1.4.1.43.10.34.1.10 | prConStackPktRateControl | 1 | 1 | This object controls whether the packet rate control feature is enabled or disabled. Products which do not support this feature… |
| 1.3.6.1.4.1.43.10.34.1.11 | prConStackPktRateLimit | 1 | 1 | This object specifies the maximum rate at which the selected types of packet may be received from a port before excess packets ar… |
| 1.3.6.1.4.1.43.10.34.1.12 | prConStackStpProtocolVersion | 1 | 1 | The version of the Spanning Tree Protocol that is to be used by this Bridge. stpVersion0(0) The original version of Spanning… |
| 1.3.6.1.4.1.43.10.34.1.13 | prConStackStpPathCostDefault | 1 | 1 | The version of the Spanning Tree default Path Costs that are to be used by this Bridge. stp8021d1998(1) Path Costs from IEEE … |
| 1.3.6.1.4.1.43.10.34.1.14 | prConStackLacpOperInfo | 1 | 1 | This object shall contain a value indicating that LACP is operational, or not operational. If not operational, all units need to … |
| 1.3.6.1.4.1.43.10.34.1.15 | prConStackFastLeaveEnabled | 0 | 0 | prConStackFastLeaveEnabled OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This ob… |
| 1.3.6.1.4.1.43.10.34.1.16 | prConStackQueueServicingOper | 0 | 0 | prConStackQueueServicingOper OBJECT-TYPE SYNTAX prConStackQueueServicingMode ACCESS read-only STATUS mandatory DESCRIPTION "Thi… |
| 1.3.6.1.4.1.43.10.34.1.17 | prConStackQueueServicingAdmin | 0 | 0 | prConStackQueueServicingAdmin OBJECT-TYPE SYNTAX prConStackQueueServicingMode ACCESS read-write STATUS mandatory DESCRIPTION "T… |