prConStackFastLeaveEnabled OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object controls whether IGMP fast leave is enabled
or disabled. With IGMP fast leave disabled, multicast clients
are disconnected from a multicast group following a leave request
and then a non-responsive timeout from a group specific query.
With IGMP fast leave enabled, multicast clients are disconnected
from a multicast group immediately following a leave request.
The default setting for this object is off(1)."
View at oid-info.com
Automatically extracted from a file named S3M_AGENT
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.10.34.1.1 | prConStackFwdingMode | 1 | 1 | This object controls whether cut-thru is enabled on the stack. Enabling cut-through can help to minimise the delay experienced by… |
| 1.3.6.1.4.1.43.10.34.1.2 | prConStackPaceMode | 1 | 1 | This object specifies the type of backoff algorithm used on the units in the stack. Any suitable port can use the standard ethern… |
| 1.3.6.1.4.1.43.10.34.1.3 | prConStackVLANConfigMode | 1 | 1 | This object specifies the VLAN mode to be used. Setting it to portMode(2) requires the user to configure each port's VLAN members… |
| 1.3.6.1.4.1.43.10.34.1.4 | prConStackRAPStudyPort | 1 | 1 | This determines the ifIndex of the port a user wishes to monitor on the copy port. Monitoring causes all data from the study por… |
| 1.3.6.1.4.1.43.10.34.1.5 | prConStackRAPCopyPort | 1 | 1 | This is the value of ifIndex specifying the port to which data will be copied (mirrored), and must be set to a valid value, along… |
| 1.3.6.1.4.1.43.10.34.1.6 | prConStackRAPEnable | 1 | 1 | This object controls the Roving Analysis Port (RAP) feature in conjunction with prConStackRAPStudyPort and prConStackRAPCopyPort.… |
| 1.3.6.1.4.1.43.10.34.1.7 | prConStackBridgeMode | 1 | 1 | prConStackBridgeMode OBJECT-TYPE SYNTAX INTEGER { single (1), multiple (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The… |
| 1.3.6.1.4.1.43.10.34.1.9 | prConStackIpTos | 1 | 1 | This object is used to enable the classification of packets based upon the value of their IPToS field. When enabled, the packet's… |
| 1.3.6.1.4.1.43.10.34.1.10 | prConStackPktRateControl | 1 | 1 | This object controls whether the packet rate control feature is enabled or disabled. Products which do not support this feature… |
| 1.3.6.1.4.1.43.10.34.1.11 | prConStackPktRateLimit | 1 | 1 | This object specifies the maximum rate at which the selected types of packet may be received from a port before excess packets ar… |
| 1.3.6.1.4.1.43.10.34.1.12 | prConStackStpProtocolVersion | 1 | 1 | The version of the Spanning Tree Protocol that is to be used by this Bridge. stpVersion0(0) The original version of Spanning… |
| 1.3.6.1.4.1.43.10.34.1.13 | prConStackStpPathCostDefault | 1 | 1 | The version of the Spanning Tree default Path Costs that are to be used by this Bridge. stp8021d1998(1) Path Costs from IEEE … |
| 1.3.6.1.4.1.43.10.34.1.14 | prConStackLacpOperInfo | 1 | 1 | This object shall contain a value indicating that LACP is operational, or not operational. If not operational, all units need to … |
| 1.3.6.1.4.1.43.10.34.1.16 | prConStackQueueServicingOper | 0 | 0 | prConStackQueueServicingOper OBJECT-TYPE SYNTAX prConStackQueueServicingMode ACCESS read-only STATUS mandatory DESCRIPTION "Thi… |
| 1.3.6.1.4.1.43.10.34.1.17 | prConStackQueueServicingAdmin | 0 | 0 | prConStackQueueServicingAdmin OBJECT-TYPE SYNTAX prConStackQueueServicingMode ACCESS read-write STATUS mandatory DESCRIPTION "T… |