This flag is used to modify and commit the changes of the dependent
parameters from this group:
aniBsuWirelessPtPConfChannelWidth
aniBsuWirelessPtPConfTDDFrameSize
aniBsuWirelessPtPConfCellRadius
aniBsuWirelessPtPConfDSUSRatio
aniBsuWirelessPtPConfPolarization
aniBsuWirelessPtPConfTargetFrequency
aniBsuWirelessPtPConfBsuRadioRegPowerLimit
aniBsuWirelessPtPConfSuRadioRegPowerLimit
aniBsuWirelessFreqAdminTable
Setting this object to true(1) causes the agent to validate
the entire set of parameters. If these set of values are
acceptable, then the new values are changed on the device.
However, for the changes to take effect, it is required to upload
the configuration (set aniDevControlStartUpload in the device_control.mib
to true) and then reboot the device.
If the validation fails when aniBsuWirelessPtPConfModify is set
to true(1), the changes are not commited and an error is returned.
In that case, the modified parameters in this group may not
reflect the correct values. They will display the values last
configured by the user, rather than the current values on the device.
To view the current values for
aniBsuWirelessPtPConfChannelWidth refer to aniBsuChannelWidth
aniBsuWirelessPtPConfTDDFrameSize refer to aniBsuTDDFrameSize
aniBsuWirelessPtPConfCellRadius refer to aniBsuStatusCellRadius (bsu_status.mib)
aniBsuWirelessPtPConfTargetFrequency refer to aniBsuTargetFrequency
aniBsuWirelessPtPConfBsuRadioRegPowerLimit refer to aniBsuWssRadioRegPowerLimit
aniBsuWirelessPtPConfSuRadioRegPowerLimit refer to aniBsuSuRadioRegPowerLimit
aniBsuWirelessFreqAdminTable refer to aniBsuWirelessFreqOperTable
A Get request on this object will always return false(2).
Parsed from file BSUWIRELESSIF-MIB.mib
Module: BSUWIRELESSIF-MIB
Vendor: Aperto Networks
Module: BSUWIRELESSIF-MIB
[Automatically extracted from oidview.com]
aniBsuWirelessPtPConfModify OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This flag is used to modify and commit the changes of the dependent parameters from this group: aniBsuWirelessPtPConfChannelWidth aniBsuWirelessPtPConfTDDFrameSize aniBsuWirelessPtPConfCellRadius aniBsuWirelessPtPConfDSUSRatio aniBsuWirelessPtPConfPolarization aniBsuWirelessPtPConfTargetFrequency aniBsuWirelessPtPConfBsuRadioRegPowerLimit aniBsuWirelessPtPConfSuRadioRegPowerLimit aniBsuWirelessFreqAdminTable Setting this object to true(1) causes the agent to validate the entire set of parameters. If these set of values are acceptable, then the new values are changed on the device. However, for the changes to take effect, it is required to upload the configuration (set aniDevControlStartUpload in the device_control.mib to true) and then reboot the device. If the validation fails when aniBsuWirelessPtPConfModify is set to true(1), the changes are not commited and an error is returned. In that case, the modified parameters in this group may not reflect the correct values. They will display the values last configured by the user, rather than the current values on the device. To view the current values for aniBsuWirelessPtPConfChannelWidth refer to aniBsuChannelWidth aniBsuWirelessPtPConfTDDFrameSize refer to aniBsuTDDFrameSize aniBsuWirelessPtPConfCellRadius refer to aniBsuStatusCellRadius (bsu_status.mib) aniBsuWirelessPtPConfTargetFrequency refer to aniBsuTargetFrequency aniBsuWirelessPtPConfBsuRadioRegPowerLimit refer to aniBsuWssRadioRegPowerLimit aniBsuWirelessPtPConfSuRadioRegPowerLimit refer to aniBsuSuRadioRegPowerLimit aniBsuWirelessFreqAdminTable refer to aniBsuWirelessFreqOperTable A Get request on this object will always return false(2). " ::= { aniBsuWirelessPtPConfGroup 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4325.3.2.10.1 | aniBsuWirelessPtPConfFrequencyBand | 0 | 0 | The Frequency Band to which the Channel Center Frequency belongs. Valid Range: 1 - 5.3 GHz UNII Band (5250 - 5350 MHz) 12 - 5.3 GHz… |
| 1.3.6.1.4.1.4325.3.2.10.2 | aniBsuWirelessPtPConfChannelWidth | 0 | 0 | The Channel Width. width-2 refers to 2MHz, width-3 refers to 3MHz width-4 refers to 4MHz, width-5 refers to 5MHz,width-6 refers t… |
| 1.3.6.1.4.1.4325.3.2.10.3 | aniBsuWirelessPtPConfTDDFrameSize | 0 | 0 | aniBsuWirelessPtPConftDDFrameSize |
| 1.3.6.1.4.1.4325.3.2.10.4 | aniBsuWirelessPtPConfCellRadius | 0 | 0 | The cell radius or link distance Refer to the constraints listed under aniBsuWirelessPtPConfChannelWidth description. Note: When t… |
| 1.3.6.1.4.1.4325.3.2.10.5 | aniBsuWirelessPtPConfDSUSRatio | 0 | 0 | The Downstream upstream ratio (DS/US ratio). This allows the user to configure how the total available bandwidth is split between… |
| 1.3.6.1.4.1.4325.3.2.10.6 | aniBsuWirelessPtPConfPolarization | 0 | 0 | The antenna polarization. |
| 1.3.6.1.4.1.4325.3.2.10.7 | aniBsuWirelessPtPConfTargetFrequency | 0 | 0 | aniBsuWirelessPtPConftargetFrequency |
| 1.3.6.1.4.1.4325.3.2.10.8 | aniBsuWirelessPtPConfBsuRadioRegPowerLimit | 0 | 0 | It is the maximum power at which the BSU radio is allowed to transmit. Antenna Gain is added to this maximum power to get EIRP (E… |
| 1.3.6.1.4.1.4325.3.2.10.9 | aniBsuWirelessPtPConfSuRadioRegPowerLimit | 0 | 0 | It is the maximum power at which a SU radio is allowed to transmit. This information is conveyed to all the SUs via the CD packet… |
| 1.3.6.1.4.1.4325.3.2.10.11 | aniBsuWirelessPtPConfBsuId | 0 | 0 | The unique AP/BSU identifier. This is the AP ID required for generating seed for frequency reuse support. Note: When this object i… |
| 1.3.6.1.4.1.4325.3.2.10.12 | aniBsuWirelessPtPConfVerifyAllSu | 0 | 0 | This flag is used to verify if the current set of BSU wireless parameters, that is, aniBsuWirelessPtPConfChannelWidth, aniBsuWirel… |
| 1.3.6.1.4.1.4325.3.2.10.13 | aniBsuWirelessPtPConfSwitchToFrequency | 0 | 0 | aniBsuWirelessPtPConfSwitchtoFrequency |
| 1.3.6.1.4.1.4325.3.2.10.14 | aniBsuWirelessPtPConfSuAFSTimeout | 0 | 0 | Configure AFS SU Timeout (second) |