aniBsuWirelessPtPConftargetFrequency
View at oid-info.com
The Target Frequency in MHz.
Its range depends on Channel Width.
1) 5.3 GHz UNII Band (5250 - 5350 MHz). The center
frequencies in this band are within 5250 + Half of
Channel Width MHz and 5350 - Half of Channel Width MHz
and can have any integer value (in MHz)
2) 5.8 GHz UNII Band (5725 - 5825 MHz). The center
frequencies in this band are within 5725 + Half of
Channel Width MHz and 5825 - Half of Channel Width MHz
and can have any integer value (in MHz).
3) 5.8 GHz General (5650 - 5925 MHz). The center
frequencies in this band are within 5650 + Half of
Channel Width MHz and 5925 - Half of Channel Width MHz
and can have any integer value (in MHz).
4) 2.6 GHz MMDS Band (2500 - 2689 MHz). The center
frequencies in this band are 2503 + 6N MHz
where N = 0,1,2,.,30
5) 2.6 GHz General (2500 - 2700 MHz). The center
frequencies in this band are within 2500 + Half of
Channel Width MHz and 2700 - Half of Channel Width
MHz and can have any integer value (in MHz).
6) 3.5 GHz General (3300 - 3800 MHz). The center
frequencies in this band are within 3300 + Half of
Channel Width MHz and 3800 - Half of Channel Width
MHz and can have any integer value (in MHz).
7) 3.5 GHz ETSI Band - 50 MHz duplexing Scheme
(3410 - 3800 MHz).
8) 3.5 GHz ETSI Band - 100 MHz duplexing scheme
(3410 - 3800 MHz).
10) 5.8 GHz ISM Band (5725 - 5850 MHz). The center
frequencies in this band are within 5725 + Half of
Channel Width MHz and 5850 - Half of Channel Width
MHz and can have any integer value (in MHz).
11) 5.3 GHz General Band (5150 - 5350 MHz). The center
frequencies in this band are within 5150 + Half of
Channel Width MHz and 5350 - Half of Channel Width MHz
and can have any integer value (in MHz)
Note: The term Half of Channel Width in all the descriptions
above, is a rounded off value (with 0.5 rounded to 1).
Note: When this object is changed through SNMP agent,
the value could take effect immediately depending on
the current channel center frequency value. If
aniBsuWirelessPtPConfTargetFrequency is modified, but
the current aniBsuChannelFrequency value is still one of
the entries in aniBsuWirelessFreqOperTable, then the target
frequency will not take effect immediately. However it
could take effect later on when the current frequency entry is
deleted from the frequency table.
Parsed from file BSUWIRELESSIF-MIB.mib
Module: BSUWIRELESSIF-MIB
Vendor: Aperto Networks
Module: BSUWIRELESSIF-MIB
[Automatically extracted from oidview.com]
aniBsuWirelessPtPConfTargetFrequency OBJECT-TYPE SYNTAX DisplayString UNITS "MHz" MAX-ACCESS read-write STATUS current DESCRIPTION "The Target Frequency in MHz. Its range depends on Channel Width. 1) 5.3 GHz UNII Band (5250 - 5350 MHz). The center frequencies in this band are within 5250 + Half of Channel Width MHz and 5350 - Half of Channel Width MHz and can have any integer value (in MHz) 2) 5.8 GHz UNII Band (5725 - 5825 MHz). The center frequencies in this band are within 5725 + Half of Channel Width MHz and 5825 - Half of Channel Width MHz and can have any integer value (in MHz). 3) 5.8 GHz General (5650 - 5925 MHz). The center frequencies in this band are within 5650 + Half of Channel Width MHz and 5925 - Half of Channel Width MHz and can have any integer value (in MHz). 4) 2.6 GHz MMDS Band (2500 - 2689 MHz). The center frequencies in this band are 2503 + 6N MHz where N = 0,1,2,.,30 5) 2.6 GHz General (2500 - 2700 MHz). The center frequencies in this band are within 2500 + Half of Channel Width MHz and 2700 - Half of Channel Width MHz and can have any integer value (in MHz). 6) 3.5 GHz General (3300 - 3800 MHz). The center frequencies in this band are within 3300 + Half of Channel Width MHz and 3800 - Half of Channel Width MHz and can have any integer value (in MHz). 7) 3.5 GHz ETSI Band - 50 MHz duplexing Scheme (3410 - 3800 MHz). 8) 3.5 GHz ETSI Band - 100 MHz duplexing scheme (3410 - 3800 MHz). 10) 5.8 GHz ISM Band (5725 - 5850 MHz). The center frequencies in this band are within 5725 + Half of Channel Width MHz and 5850 - Half of Channel Width MHz and can have any integer value (in MHz). 11) 5.3 GHz General Band (5150 - 5350 MHz). The center frequencies in this band are within 5150 + Half of Channel Width MHz and 5350 - Half of Channel Width MHz and can have any integer value (in MHz) Note: The term Half of Channel Width in all the descriptions above, is a rounded off value (with 0.5 rounded to 1). Note: When this object is changed through SNMP agent, the value could take effect immediately depending on the current channel center frequency value. If aniBsuWirelessPtPConfTargetFrequency is modified, but the current aniBsuChannelFrequency value is still one of the entries in aniBsuWirelessFreqOperTable, then the target frequency will not take effect immediately. However it could take effect later on when the current frequency entry is deleted from the frequency table. " ::= { aniBsuWirelessPtPConfGroup 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4325.3.2.10.1 | aniBsuWirelessPtPConfFrequencyBand | 0 | 0 | The Frequency Band to which the Channel Center Frequency belongs. Valid Range: 1 - 5.3 GHz UNII Band (5250 - 5350 MHz) 12 - 5.3 GHz… |
| 1.3.6.1.4.1.4325.3.2.10.2 | aniBsuWirelessPtPConfChannelWidth | 0 | 0 | The Channel Width. width-2 refers to 2MHz, width-3 refers to 3MHz width-4 refers to 4MHz, width-5 refers to 5MHz,width-6 refers t… |
| 1.3.6.1.4.1.4325.3.2.10.3 | aniBsuWirelessPtPConfTDDFrameSize | 0 | 0 | aniBsuWirelessPtPConftDDFrameSize |
| 1.3.6.1.4.1.4325.3.2.10.4 | aniBsuWirelessPtPConfCellRadius | 0 | 0 | The cell radius or link distance Refer to the constraints listed under aniBsuWirelessPtPConfChannelWidth description. Note: When t… |
| 1.3.6.1.4.1.4325.3.2.10.5 | aniBsuWirelessPtPConfDSUSRatio | 0 | 0 | The Downstream upstream ratio (DS/US ratio). This allows the user to configure how the total available bandwidth is split between… |
| 1.3.6.1.4.1.4325.3.2.10.6 | aniBsuWirelessPtPConfPolarization | 0 | 0 | The antenna polarization. |
| 1.3.6.1.4.1.4325.3.2.10.8 | aniBsuWirelessPtPConfBsuRadioRegPowerLimit | 0 | 0 | It is the maximum power at which the BSU radio is allowed to transmit. Antenna Gain is added to this maximum power to get EIRP (E… |
| 1.3.6.1.4.1.4325.3.2.10.9 | aniBsuWirelessPtPConfSuRadioRegPowerLimit | 0 | 0 | It is the maximum power at which a SU radio is allowed to transmit. This information is conveyed to all the SUs via the CD packet… |
| 1.3.6.1.4.1.4325.3.2.10.10 | aniBsuWirelessPtPConfModify | 0 | 0 | This flag is used to modify and commit the changes of the dependent parameters from this group: aniBsuWirelessPtPConfChannelWidth… |
| 1.3.6.1.4.1.4325.3.2.10.11 | aniBsuWirelessPtPConfBsuId | 0 | 0 | The unique AP/BSU identifier. This is the AP ID required for generating seed for frequency reuse support. Note: When this object i… |
| 1.3.6.1.4.1.4325.3.2.10.12 | aniBsuWirelessPtPConfVerifyAllSu | 0 | 0 | This flag is used to verify if the current set of BSU wireless parameters, that is, aniBsuWirelessPtPConfChannelWidth, aniBsuWirel… |
| 1.3.6.1.4.1.4325.3.2.10.13 | aniBsuWirelessPtPConfSwitchToFrequency | 0 | 0 | aniBsuWirelessPtPConfSwitchtoFrequency |
| 1.3.6.1.4.1.4325.3.2.10.14 | aniBsuWirelessPtPConfSuAFSTimeout | 0 | 0 | Configure AFS SU Timeout (second) |