The Downstream upstream ratio (DS/US ratio).
This allows the user to configure how the total available
bandwidth is split between downstream and upsteam.
ds70-us30 is 70/30
ds60-us40 is 60/40
ds50-us50 is 50/50
ds40-us60 is 40/60
ds30-us70 is 30/70
Also refer to the constraints listed under
aniBsuWirelessPtPConfChannelWidth description.
Note: When this object is changed through SNMP agent,
it is required to upload the configuration (set
aniDevControlStartUpload in the device_control.mib
to true) and then reboot the device for the changes
to take effect.
Parsed from file BSUWIRELESSIF-MIB.mib
Module: BSUWIRELESSIF-MIB
Vendor: Aperto Networks
Module: BSUWIRELESSIF-MIB
[Automatically extracted from oidview.com]
aniBsuWirelessPtPConfDSUSRatio OBJECT-TYPE SYNTAX INTEGER { ds70-us30(70), ds60-us40(60), ds50-us50(50), ds40-us60(40), ds30-us70(30) } MAX-ACCESS read-write STATUS current DESCRIPTION "The Downstream upstream ratio (DS/US ratio). This allows the user to configure how the total available bandwidth is split between downstream and upsteam. ds70-us30 is 70/30 ds60-us40 is 60/40 ds50-us50 is 50/50 ds40-us60 is 40/60 ds30-us70 is 30/70 Also refer to the constraints listed under aniBsuWirelessPtPConfChannelWidth description. Note: When this object is changed through SNMP agent, it is required to upload the configuration (set aniDevControlStartUpload in the device_control.mib to true) and then reboot the device for the changes to take effect. " ::= { aniBsuWirelessPtPConfGroup 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4325.3.2.10.1 | aniBsuWirelessPtPConfFrequencyBand | 0 | 0 | The Frequency Band to which the Channel Center Frequency belongs. Valid Range: 1 - 5.3 GHz UNII Band (5250 - 5350 MHz) 12 - 5.3 GHz… |
| 1.3.6.1.4.1.4325.3.2.10.2 | aniBsuWirelessPtPConfChannelWidth | 0 | 0 | The Channel Width. width-2 refers to 2MHz, width-3 refers to 3MHz width-4 refers to 4MHz, width-5 refers to 5MHz,width-6 refers t… |
| 1.3.6.1.4.1.4325.3.2.10.3 | aniBsuWirelessPtPConfTDDFrameSize | 0 | 0 | aniBsuWirelessPtPConftDDFrameSize |
| 1.3.6.1.4.1.4325.3.2.10.4 | aniBsuWirelessPtPConfCellRadius | 0 | 0 | The cell radius or link distance Refer to the constraints listed under aniBsuWirelessPtPConfChannelWidth description. Note: When t… |
| 1.3.6.1.4.1.4325.3.2.10.6 | aniBsuWirelessPtPConfPolarization | 0 | 0 | The antenna polarization. |
| 1.3.6.1.4.1.4325.3.2.10.7 | aniBsuWirelessPtPConfTargetFrequency | 0 | 0 | aniBsuWirelessPtPConftargetFrequency |
| 1.3.6.1.4.1.4325.3.2.10.8 | aniBsuWirelessPtPConfBsuRadioRegPowerLimit | 0 | 0 | It is the maximum power at which the BSU radio is allowed to transmit. Antenna Gain is added to this maximum power to get EIRP (E… |
| 1.3.6.1.4.1.4325.3.2.10.9 | aniBsuWirelessPtPConfSuRadioRegPowerLimit | 0 | 0 | It is the maximum power at which a SU radio is allowed to transmit. This information is conveyed to all the SUs via the CD packet… |
| 1.3.6.1.4.1.4325.3.2.10.10 | aniBsuWirelessPtPConfModify | 0 | 0 | This flag is used to modify and commit the changes of the dependent parameters from this group: aniBsuWirelessPtPConfChannelWidth… |
| 1.3.6.1.4.1.4325.3.2.10.11 | aniBsuWirelessPtPConfBsuId | 0 | 0 | The unique AP/BSU identifier. This is the AP ID required for generating seed for frequency reuse support. Note: When this object i… |
| 1.3.6.1.4.1.4325.3.2.10.12 | aniBsuWirelessPtPConfVerifyAllSu | 0 | 0 | This flag is used to verify if the current set of BSU wireless parameters, that is, aniBsuWirelessPtPConfChannelWidth, aniBsuWirel… |
| 1.3.6.1.4.1.4325.3.2.10.13 | aniBsuWirelessPtPConfSwitchToFrequency | 0 | 0 | aniBsuWirelessPtPConfSwitchtoFrequency |
| 1.3.6.1.4.1.4325.3.2.10.14 | aniBsuWirelessPtPConfSuAFSTimeout | 0 | 0 | Configure AFS SU Timeout (second) |