It is the maximum power at which a SU radio is allowed to
transmit. This information is conveyed to all the SUs via
the CD packet. Antenna Gain is added to this maximum power
to get EIRP (Effective Incidental Radiated Power)
Valid Range -
For 5.3GHz radios: 8 to 20 dBm
For 5.8GHz radios: 8 to 20 dBm
For 3.5GHz radios: 10 to 23 dBm
For 2.6GHz radios: 10 to 23 dBm
Parsed from file BSUWIRELESSIF-MIB.mib
Module: BSUWIRELESSIF-MIB
Vendor: Aperto Networks
Module: BSUWIRELESSIF-MIB
[Automatically extracted from oidview.com]
aniBsuWirelessPtPConfSuRadioRegPowerLimit OBJECT-TYPE SYNTAX INTEGER UNITS "dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "It is the maximum power at which a SU radio is allowed to transmit. This information is conveyed to all the SUs via the CD packet. Antenna Gain is added to this maximum power to get EIRP (Effective Incidental Radiated Power) Valid Range - For 5.3GHz radios: 8 to 20 dBm For 5.8GHz radios: 8 to 20 dBm For 3.5GHz radios: 10 to 23 dBm For 2.6GHz radios: 10 to 23 dBm " ::= { aniBsuWirelessPtPConfGroup 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4325.3.2.10.1 | aniBsuWirelessPtPConfFrequencyBand | 0 | 0 | The Frequency Band to which the Channel Center Frequency belongs. Valid Range: 1 - 5.3 GHz UNII Band (5250 - 5350 MHz) 12 - 5.3 GHz… |
| 1.3.6.1.4.1.4325.3.2.10.2 | aniBsuWirelessPtPConfChannelWidth | 0 | 0 | The Channel Width. width-2 refers to 2MHz, width-3 refers to 3MHz width-4 refers to 4MHz, width-5 refers to 5MHz,width-6 refers t… |
| 1.3.6.1.4.1.4325.3.2.10.3 | aniBsuWirelessPtPConfTDDFrameSize | 0 | 0 | aniBsuWirelessPtPConftDDFrameSize |
| 1.3.6.1.4.1.4325.3.2.10.4 | aniBsuWirelessPtPConfCellRadius | 0 | 0 | The cell radius or link distance Refer to the constraints listed under aniBsuWirelessPtPConfChannelWidth description. Note: When t… |
| 1.3.6.1.4.1.4325.3.2.10.5 | aniBsuWirelessPtPConfDSUSRatio | 0 | 0 | The Downstream upstream ratio (DS/US ratio). This allows the user to configure how the total available bandwidth is split between… |
| 1.3.6.1.4.1.4325.3.2.10.6 | aniBsuWirelessPtPConfPolarization | 0 | 0 | The antenna polarization. |
| 1.3.6.1.4.1.4325.3.2.10.7 | aniBsuWirelessPtPConfTargetFrequency | 0 | 0 | aniBsuWirelessPtPConftargetFrequency |
| 1.3.6.1.4.1.4325.3.2.10.8 | aniBsuWirelessPtPConfBsuRadioRegPowerLimit | 0 | 0 | It is the maximum power at which the BSU radio is allowed to transmit. Antenna Gain is added to this maximum power to get EIRP (E… |
| 1.3.6.1.4.1.4325.3.2.10.10 | aniBsuWirelessPtPConfModify | 0 | 0 | This flag is used to modify and commit the changes of the dependent parameters from this group: aniBsuWirelessPtPConfChannelWidth… |
| 1.3.6.1.4.1.4325.3.2.10.11 | aniBsuWirelessPtPConfBsuId | 0 | 0 | The unique AP/BSU identifier. This is the AP ID required for generating seed for frequency reuse support. Note: When this object i… |
| 1.3.6.1.4.1.4325.3.2.10.12 | aniBsuWirelessPtPConfVerifyAllSu | 0 | 0 | This flag is used to verify if the current set of BSU wireless parameters, that is, aniBsuWirelessPtPConfChannelWidth, aniBsuWirel… |
| 1.3.6.1.4.1.4325.3.2.10.13 | aniBsuWirelessPtPConfSwitchToFrequency | 0 | 0 | aniBsuWirelessPtPConfSwitchtoFrequency |
| 1.3.6.1.4.1.4325.3.2.10.14 | aniBsuWirelessPtPConfSuAFSTimeout | 0 | 0 | Configure AFS SU Timeout (second) |