This flag is used to verify if the current set of BSU
wireless parameters, that is,
aniBsuWirelessPtPConfChannelWidth,
aniBsuWirelessPtPConfTargetFrequency,
aniBsuWirelessPtPConfBsuId
are correctly configured on all the SUs connected.
The values are compared against all the SUs connected to this BSU.
Sending a Get request on this object causes the agent to verify
the above set of parameters. If these set of values are
incorrect, an error string is returned indicating that some
values are not in sync. If the current set of values are
correct, then the string 'No error' is displayed.
This object might require upto 10 seconds to respond if multiple SUs
are connected. Therefore, to ensure that it does not timeout before
getting the complete results, the SNMP Manager tool should increase
it's timeout value for this object to more than 10 seconds.
Parsed from file BSUWIRELESSIF-MIB.mib
Module: BSUWIRELESSIF-MIB
Vendor: Aperto Networks
Module: BSUWIRELESSIF-MIB
[Automatically extracted from oidview.com]
aniBsuWirelessPtPConfVerifyAllSu OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This flag is used to verify if the current set of BSU wireless parameters, that is, aniBsuWirelessPtPConfChannelWidth, aniBsuWirelessPtPConfTargetFrequency, aniBsuWirelessPtPConfBsuId are correctly configured on all the SUs connected. The values are compared against all the SUs connected to this BSU. Sending a Get request on this object causes the agent to verify the above set of parameters. If these set of values are incorrect, an error string is returned indicating that some values are not in sync. If the current set of values are correct, then the string 'No error' is displayed. This object might require upto 10 seconds to respond if multiple SUs are connected. Therefore, to ensure that it does not timeout before getting the complete results, the SNMP Manager tool should increase it's timeout value for this object to more than 10 seconds. " ::= { aniBsuWirelessPtPConfGroup 12 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4325.3.2.10.1 | aniBsuWirelessPtPConfFrequencyBand | 0 | 0 | The Frequency Band to which the Channel Center Frequency belongs. Valid Range: 1 - 5.3 GHz UNII Band (5250 - 5350 MHz) 12 - 5.3 GHz… |
| 1.3.6.1.4.1.4325.3.2.10.2 | aniBsuWirelessPtPConfChannelWidth | 0 | 0 | The Channel Width. width-2 refers to 2MHz, width-3 refers to 3MHz width-4 refers to 4MHz, width-5 refers to 5MHz,width-6 refers t… |
| 1.3.6.1.4.1.4325.3.2.10.3 | aniBsuWirelessPtPConfTDDFrameSize | 0 | 0 | aniBsuWirelessPtPConftDDFrameSize |
| 1.3.6.1.4.1.4325.3.2.10.4 | aniBsuWirelessPtPConfCellRadius | 0 | 0 | The cell radius or link distance Refer to the constraints listed under aniBsuWirelessPtPConfChannelWidth description. Note: When t… |
| 1.3.6.1.4.1.4325.3.2.10.5 | aniBsuWirelessPtPConfDSUSRatio | 0 | 0 | The Downstream upstream ratio (DS/US ratio). This allows the user to configure how the total available bandwidth is split between… |
| 1.3.6.1.4.1.4325.3.2.10.6 | aniBsuWirelessPtPConfPolarization | 0 | 0 | The antenna polarization. |
| 1.3.6.1.4.1.4325.3.2.10.7 | aniBsuWirelessPtPConfTargetFrequency | 0 | 0 | aniBsuWirelessPtPConftargetFrequency |
| 1.3.6.1.4.1.4325.3.2.10.8 | aniBsuWirelessPtPConfBsuRadioRegPowerLimit | 0 | 0 | It is the maximum power at which the BSU radio is allowed to transmit. Antenna Gain is added to this maximum power to get EIRP (E… |
| 1.3.6.1.4.1.4325.3.2.10.9 | aniBsuWirelessPtPConfSuRadioRegPowerLimit | 0 | 0 | It is the maximum power at which a SU radio is allowed to transmit. This information is conveyed to all the SUs via the CD packet… |
| 1.3.6.1.4.1.4325.3.2.10.10 | aniBsuWirelessPtPConfModify | 0 | 0 | This flag is used to modify and commit the changes of the dependent parameters from this group: aniBsuWirelessPtPConfChannelWidth… |
| 1.3.6.1.4.1.4325.3.2.10.11 | aniBsuWirelessPtPConfBsuId | 0 | 0 | The unique AP/BSU identifier. This is the AP ID required for generating seed for frequency reuse support. Note: When this object i… |
| 1.3.6.1.4.1.4325.3.2.10.13 | aniBsuWirelessPtPConfSwitchToFrequency | 0 | 0 | aniBsuWirelessPtPConfSwitchtoFrequency |
| 1.3.6.1.4.1.4325.3.2.10.14 | aniBsuWirelessPtPConfSuAFSTimeout | 0 | 0 | Configure AFS SU Timeout (second) |