There's a tight correlation among DTE data rate, starting
DS0, and channel density. This read-only parameter reports
the status of the most recent change to any of these connection
parameters. If the connection request is not valid a mismatch
among DteLineRate, DteStartDs0, and DteChannelDensity must be
resolved
(1) and (3) configuration valid - the previous connections profile is
accepted and activated
(2) and (4) connections profile invalid, previous configuration
remains.
Parsed from file MFRAP.MIB.txt
Company: None
Module: MFRAP-MIB
There's a tight correlation among DTE data rate, starting
DS0, and channel density. This read-only parameter reports
the status of the most recent change to any of these connection
parameters. If the connection request is not valid a mismatch
among DteLineRate, DteStartDs0, and DteChannelDensity must be
resolved
(1) and (3) configuration valid - the previous connections profile is
accepted and activated
(2) and (4) connections profile invalid, previous configuration
remains.
Parsed from file MFRAP-MIB.mib
Module: MFRAP-MIB
Vendor: Sync Research, Inc.
Module: MFRAP-MIB
[Automatically extracted from oidview.com]
mfrapCfgDteConnAutoStatus OBJECT-TYPE SYNTAX INTEGER { configuration-valid (1), configuration-invalid (2), valid-config-updated (3), invalid-cfg-no-update (4) } ACCESS read-only STATUS mandatory DESCRIPTION "There's a tight correlation among DTE data rate, starting DS0, and channel density. This read-only parameter reports the status of the most recent change to any of these connection parameters. If the connection request is not valid a mismatch among DteLineRate, DteStartDs0, and DteChannelDensity must be resolved (1) and (3) configuration valid - the previous connections profile is accepted and activated (2) and (4) connections profile invalid, previous configuration remains." ::= { mfrapCfgDteTable 13 }
mfrapCfgDteConnAutoStatus OBJECT-TYPE SYNTAX INTEGER { configuration-valid (1), configuration-invalid (2), valid-config-updated (3), invalid-cfg-no-update (4) } ACCESS read-only STATUS mandatory DESCRIPTION "There's a tight correlation among DTE data rate, starting DS0, and channel density. This read-only parameter reports the status of the most recent change to any of these connection parameters. If the connection request is not valid a mismatch among DteLineRate, DteStartDs0, and DteChannelDensity must be resolved (1) and (3) configuration valid - the previous connections profile is accepted and activated (2) and (4) connections profile invalid, previous configuration remains." ::= { mfrapCfgDteTable 13 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.8.2.4.13.0 | mfrapCfgDteConnAutoStatus | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.8.2.4.1 | mfrapCfgDteIntfType | 1 | 1 | mfrapCfgDteIntftype |
| 1.3.6.1.4.1.485.8.2.4.2 | mfrapCfgDteDataMode | 1 | 1 | Inverts the DTE data for transfer across the WAN. Can make some applications, particularly HDLC-based protocols, meet density req… |
| 1.3.6.1.4.1.485.8.2.4.3 | mfrapCfgDteClockMode | 1 | 1 | This selection controls how the unit internally latches the transmit data from the DTE. Normal will sample data with the rising e… |
| 1.3.6.1.4.1.485.8.2.4.4 | mfrapCfgDteTiming | 1 | 1 | Serial DTE Transmit Timing mode. Loop-1 (1) uses the clock returned from the DTE (TT/TCE) to sample tx data, Loop-2 (2) uses the … |
| 1.3.6.1.4.1.485.8.2.4.5 | mfrapCfgDteLineRate | 1 | 1 | Serial DTE Data Rate in bits per second. Valid rates depend upon channel density selection: nX56K for bit-7-stuffing, and nX64K f… |
| 1.3.6.1.4.1.485.8.2.4.6 | mfrapCfgDteChannelDensity | 1 | 1 | Packing of serial data into T1 DS0's. Bit-7-stuff supports DTE rates of nX56Kb/s (from 56K to 1344K) and provides sufficient ones… |
| 1.3.6.1.4.1.485.8.2.4.7 | mfrapCfgDteStartDs0 | 1 | 1 | T1 WAN includes 24 DS0's available for user data. Each DS0 carries either 56Kbit/sec (bit-7-stuffing) or 64KBit/sec (clear-channe… |
| 1.3.6.1.4.1.485.8.2.4.8 | mfrapCfgDteConnStatus | 1 | 1 | The current status of the WAN to DTE mappings. (1) connections valid and DS0s allocated to DTE data. (4) no connections configure… |
| 1.3.6.1.4.1.485.8.2.4.9 | mfrapCfgDteConnStartDs0 | 1 | 1 | T1 WAN includes 24 DS0's available for user data. Each DS0 carries either 56Kbit/sec (bit-7-stuffing) or 64KBit/sec (clear-channe… |
| 1.3.6.1.4.1.485.8.2.4.10 | mfrapCfgDteConnRate | 1 | 1 | Serial DTE Data Rate in bits per second. Valid rates depend upon channel density selection: nX56K for bit-7-stuffing, and nX64K f… |
| 1.3.6.1.4.1.485.8.2.4.11 | mfrapCfgDteConnDensity | 1 | 1 | Packing of serial data into T1 DS0's. Bit-7-stuff supports DTE rates of nX56Kb/s (from 56K to 1344K) and provides sufficient ones… |
| 1.3.6.1.4.1.485.8.2.4.12 | mfrapCfgDteConnDs0Required | 1 | 1 | The number of DS0s required by the node's DTE port. This is based upon the DTE data rate and channel density selections. |
| 1.3.6.1.4.1.485.8.2.4.14 | mfrapCfgDteConnAutoUpdate | 1 | 1 | Updates the connection-critical parameters: line rate, channel density and starting ds0; drops the currect connection; and initia… |
| 1.3.6.1.4.1.485.8.2.4.15 | mfrapCfgDteRts | 1 | 1 | Selects whether the RTS signal is external-from-dte (2) or internal-held-active (1). |
| 1.3.6.1.4.1.485.8.2.4.16 | mfrapCfgDteDtr | 1 | 1 | Selects whether the DTR signal is external-from-dte (2) or internal-held-active (1). |
| 1.3.6.1.4.1.485.8.2.4.18 | mfrapCfgDteDcdOutput | 1 | 1 | Specifies the behavior of this control signal generated by the M-FRAP towards the DTE. inactive-always (1) - signal is permanentl… |
| 1.3.6.1.4.1.485.8.2.4.19 | mfrapCfgDteDsrOutput | 1 | 1 | Specifies the behavior of this control signal generated by the M-FRAP towards the DTE. inactive-always (1) - signal is permanentl… |
| 1.3.6.1.4.1.485.8.2.4.20 | mfrapCfgDteCtsOutput | 1 | 1 | Specifies the behavior of this control signal generated by the M-FRAP towards the DTE. inactive-always (1) - signal is permanentl… |