T1 WAN includes 24 DS0's available for user data. Each DS0
carries either 56Kbit/sec (bit-7-stuffing) or 64KBit/sec
(clear-channel). This value is the starting DS0 used by the
node to allocate DS0s to match the DTE's data rate. Sequential,
contiguous DS0s are assigned as required. The number of DS0s
required is based upon the DTE Data Rate and DTE Channel Mapping.
This read-only value is the value which was most recently set
through DteCfgConnStartDs0; in the event of a connection failure,
this field should be examined along with CfgDteLineRate and
CfgDteChanelDensity to determine the parameter mismatch that
caused the connection failure.
Parsed from file MFRAP.MIB.txt
Company: None
Module: MFRAP-MIB
T1 WAN includes 24 DS0's available for user data. Each DS0
carries either 56Kbit/sec (bit-7-stuffing) or 64KBit/sec
(clear-channel). This value is the starting DS0 used by the
node to allocate DS0s to match the DTE's data rate. Sequential,
contiguous DS0s are assigned as required. The number of DS0s
required is based upon the DTE Data Rate and DTE Channel Mapping.
This read-only value is the value which was most recently set
through DteCfgConnStartDs0; in the event of a connection failure,
this field should be examined along with CfgDteLineRate and
CfgDteChanelDensity to determine the parameter mismatch that
caused the connection failure.
Parsed from file MFRAP-MIB.mib
Module: MFRAP-MIB
Vendor: Sync Research, Inc.
Module: MFRAP-MIB
[Automatically extracted from oidview.com]
mfrapCfgDteStartDs0 OBJECT-TYPE SYNTAX INTEGER { ds0-01 (1), ds0-02 (2), ds0-03 (3), ds0-04 (4), ds0-05 (5), ds0-06 (6), ds0-07 (7), ds0-08 (8), ds0-09 (9), ds0-10 (10), ds0-11 (11), ds0-12 (12), ds0-13 (13), ds0-14 (14), ds0-15 (15), ds0-16 (16), ds0-17 (17), ds0-18 (18), ds0-19 (19), ds0-20 (20), ds0-21 (21), ds0-22 (22), ds0-23 (23), ds0-24 (24), no-current-connections (40), non-continuous-ds0s (41) } ACCESS read-only STATUS mandatory DESCRIPTION "T1 WAN includes 24 DS0's available for user data. Each DS0 carries either 56Kbit/sec (bit-7-stuffing) or 64KBit/sec (clear-channel). This value is the starting DS0 used by the node to allocate DS0s to match the DTE's data rate. Sequential, contiguous DS0s are assigned as required. The number of DS0s required is based upon the DTE Data Rate and DTE Channel Mapping. This read-only value is the value which was most recently set through DteCfgConnStartDs0; in the event of a connection failure, this field should be examined along with CfgDteLineRate and CfgDteChanelDensity to determine the parameter mismatch that caused the connection failure." ::= { mfrapCfgDteTable 7 }
mfrapCfgDteStartDs0 OBJECT-TYPE SYNTAX INTEGER { ds0-01 (1), ds0-02 (2), ds0-03 (3), ds0-04 (4), ds0-05 (5), ds0-06 (6), ds0-07 (7), ds0-08 (8), ds0-09 (9), ds0-10 (10), ds0-11 (11), ds0-12 (12), ds0-13 (13), ds0-14 (14), ds0-15 (15), ds0-16 (16), ds0-17 (17), ds0-18 (18), ds0-19 (19), ds0-20 (20), ds0-21 (21), ds0-22 (22), ds0-23 (23), ds0-24 (24), no-current-connections (40), non-continuous-ds0s (41) } ACCESS read-only STATUS mandatory DESCRIPTION "T1 WAN includes 24 DS0's available for user data. Each DS0 carries either 56Kbit/sec (bit-7-stuffing) or 64KBit/sec (clear-channel). This value is the starting DS0 used by the node to allocate DS0s to match the DTE's data rate. Sequential, contiguous DS0s are assigned as required. The number of DS0s required is based upon the DTE Data Rate and DTE Channel Mapping. This read-only value is the value which was most recently set through DteCfgConnStartDs0; in the event of a connection failure, this field should be examined along with CfgDteLineRate and CfgDteChanelDensity to determine the parameter mismatch that caused the connection failure." ::= { mfrapCfgDteTable 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.8.2.4.7.0 | mfrapCfgDteStartDs0 | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.8.2.4.1 | mfrapCfgDteIntfType | 1 | 1 | mfrapCfgDteIntftype |
| 1.3.6.1.4.1.485.8.2.4.2 | mfrapCfgDteDataMode | 1 | 1 | Inverts the DTE data for transfer across the WAN. Can make some applications, particularly HDLC-based protocols, meet density req… |
| 1.3.6.1.4.1.485.8.2.4.3 | mfrapCfgDteClockMode | 1 | 1 | This selection controls how the unit internally latches the transmit data from the DTE. Normal will sample data with the rising e… |
| 1.3.6.1.4.1.485.8.2.4.4 | mfrapCfgDteTiming | 1 | 1 | Serial DTE Transmit Timing mode. Loop-1 (1) uses the clock returned from the DTE (TT/TCE) to sample tx data, Loop-2 (2) uses the … |
| 1.3.6.1.4.1.485.8.2.4.5 | mfrapCfgDteLineRate | 1 | 1 | Serial DTE Data Rate in bits per second. Valid rates depend upon channel density selection: nX56K for bit-7-stuffing, and nX64K f… |
| 1.3.6.1.4.1.485.8.2.4.6 | mfrapCfgDteChannelDensity | 1 | 1 | Packing of serial data into T1 DS0's. Bit-7-stuff supports DTE rates of nX56Kb/s (from 56K to 1344K) and provides sufficient ones… |
| 1.3.6.1.4.1.485.8.2.4.8 | mfrapCfgDteConnStatus | 1 | 1 | The current status of the WAN to DTE mappings. (1) connections valid and DS0s allocated to DTE data. (4) no connections configure… |
| 1.3.6.1.4.1.485.8.2.4.9 | mfrapCfgDteConnStartDs0 | 1 | 1 | T1 WAN includes 24 DS0's available for user data. Each DS0 carries either 56Kbit/sec (bit-7-stuffing) or 64KBit/sec (clear-channe… |
| 1.3.6.1.4.1.485.8.2.4.10 | mfrapCfgDteConnRate | 1 | 1 | Serial DTE Data Rate in bits per second. Valid rates depend upon channel density selection: nX56K for bit-7-stuffing, and nX64K f… |
| 1.3.6.1.4.1.485.8.2.4.11 | mfrapCfgDteConnDensity | 1 | 1 | Packing of serial data into T1 DS0's. Bit-7-stuff supports DTE rates of nX56Kb/s (from 56K to 1344K) and provides sufficient ones… |
| 1.3.6.1.4.1.485.8.2.4.12 | mfrapCfgDteConnDs0Required | 1 | 1 | The number of DS0s required by the node's DTE port. This is based upon the DTE data rate and channel density selections. |
| 1.3.6.1.4.1.485.8.2.4.13 | mfrapCfgDteConnAutoStatus | 1 | 1 | There's a tight correlation among DTE data rate, starting DS0, and channel density. This read-only parameter reports the status o… |
| 1.3.6.1.4.1.485.8.2.4.14 | mfrapCfgDteConnAutoUpdate | 1 | 1 | Updates the connection-critical parameters: line rate, channel density and starting ds0; drops the currect connection; and initia… |
| 1.3.6.1.4.1.485.8.2.4.15 | mfrapCfgDteRts | 1 | 1 | Selects whether the RTS signal is external-from-dte (2) or internal-held-active (1). |
| 1.3.6.1.4.1.485.8.2.4.16 | mfrapCfgDteDtr | 1 | 1 | Selects whether the DTR signal is external-from-dte (2) or internal-held-active (1). |
| 1.3.6.1.4.1.485.8.2.4.18 | mfrapCfgDteDcdOutput | 1 | 1 | Specifies the behavior of this control signal generated by the M-FRAP towards the DTE. inactive-always (1) - signal is permanentl… |
| 1.3.6.1.4.1.485.8.2.4.19 | mfrapCfgDteDsrOutput | 1 | 1 | Specifies the behavior of this control signal generated by the M-FRAP towards the DTE. inactive-always (1) - signal is permanentl… |
| 1.3.6.1.4.1.485.8.2.4.20 | mfrapCfgDteCtsOutput | 1 | 1 | Specifies the behavior of this control signal generated by the M-FRAP towards the DTE. inactive-always (1) - signal is permanentl… |