The current status of the WAN to DTE mappings.
(1) connections valid and DS0s allocated to DTE data.
(4) no connections configured between WAN and DTE.
Parsed from file MFRAP.MIB.txt
Company: None
Module: MFRAP-MIB
The current status of the WAN to DTE mappings.
(1) connections valid and DS0s allocated to DTE data.
(4) no connections configured between WAN and DTE.
Parsed from file MFRAP-MIB.mib
Module: MFRAP-MIB
Vendor: Sync Research, Inc.
Module: MFRAP-MIB
[Automatically extracted from oidview.com]
mfrapCfgDteConnStatus OBJECT-TYPE SYNTAX INTEGER { connections-valid (1), no-current-connections (4) } ACCESS read-only STATUS mandatory DESCRIPTION "The current status of the WAN to DTE mappings. (1) connections valid and DS0s allocated to DTE data. (4) no connections configured between WAN and DTE." ::= { mfrapCfgDteTable 8 }
mfrapCfgDteConnStatus OBJECT-TYPE SYNTAX INTEGER { connections-valid (1), no-current-connections (4) } ACCESS read-only STATUS mandatory DESCRIPTION "The current status of the WAN to DTE mappings. (1) connections valid and DS0s allocated to DTE data. (4) no connections configured between WAN and DTE." ::= { mfrapCfgDteTable 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.8.2.4.8.0 | mfrapCfgDteConnStatus | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.485.8.2.4.1 | mfrapCfgDteIntfType | 1 | 1 | mfrapCfgDteIntftype |
| 1.3.6.1.4.1.485.8.2.4.2 | mfrapCfgDteDataMode | 1 | 1 | Inverts the DTE data for transfer across the WAN. Can make some applications, particularly HDLC-based protocols, meet density req… |
| 1.3.6.1.4.1.485.8.2.4.3 | mfrapCfgDteClockMode | 1 | 1 | This selection controls how the unit internally latches the transmit data from the DTE. Normal will sample data with the rising e… |
| 1.3.6.1.4.1.485.8.2.4.4 | mfrapCfgDteTiming | 1 | 1 | Serial DTE Transmit Timing mode. Loop-1 (1) uses the clock returned from the DTE (TT/TCE) to sample tx data, Loop-2 (2) uses the … |
| 1.3.6.1.4.1.485.8.2.4.5 | mfrapCfgDteLineRate | 1 | 1 | Serial DTE Data Rate in bits per second. Valid rates depend upon channel density selection: nX56K for bit-7-stuffing, and nX64K f… |
| 1.3.6.1.4.1.485.8.2.4.6 | mfrapCfgDteChannelDensity | 1 | 1 | Packing of serial data into T1 DS0's. Bit-7-stuff supports DTE rates of nX56Kb/s (from 56K to 1344K) and provides sufficient ones… |
| 1.3.6.1.4.1.485.8.2.4.7 | mfrapCfgDteStartDs0 | 1 | 1 | T1 WAN includes 24 DS0's available for user data. Each DS0 carries either 56Kbit/sec (bit-7-stuffing) or 64KBit/sec (clear-channe… |
| 1.3.6.1.4.1.485.8.2.4.9 | mfrapCfgDteConnStartDs0 | 1 | 1 | T1 WAN includes 24 DS0's available for user data. Each DS0 carries either 56Kbit/sec (bit-7-stuffing) or 64KBit/sec (clear-channe… |
| 1.3.6.1.4.1.485.8.2.4.10 | mfrapCfgDteConnRate | 1 | 1 | Serial DTE Data Rate in bits per second. Valid rates depend upon channel density selection: nX56K for bit-7-stuffing, and nX64K f… |
| 1.3.6.1.4.1.485.8.2.4.11 | mfrapCfgDteConnDensity | 1 | 1 | Packing of serial data into T1 DS0's. Bit-7-stuff supports DTE rates of nX56Kb/s (from 56K to 1344K) and provides sufficient ones… |
| 1.3.6.1.4.1.485.8.2.4.12 | mfrapCfgDteConnDs0Required | 1 | 1 | The number of DS0s required by the node's DTE port. This is based upon the DTE data rate and channel density selections. |
| 1.3.6.1.4.1.485.8.2.4.13 | mfrapCfgDteConnAutoStatus | 1 | 1 | There's a tight correlation among DTE data rate, starting DS0, and channel density. This read-only parameter reports the status o… |
| 1.3.6.1.4.1.485.8.2.4.14 | mfrapCfgDteConnAutoUpdate | 1 | 1 | Updates the connection-critical parameters: line rate, channel density and starting ds0; drops the currect connection; and initia… |
| 1.3.6.1.4.1.485.8.2.4.15 | mfrapCfgDteRts | 1 | 1 | Selects whether the RTS signal is external-from-dte (2) or internal-held-active (1). |
| 1.3.6.1.4.1.485.8.2.4.16 | mfrapCfgDteDtr | 1 | 1 | Selects whether the DTR signal is external-from-dte (2) or internal-held-active (1). |
| 1.3.6.1.4.1.485.8.2.4.18 | mfrapCfgDteDcdOutput | 1 | 1 | Specifies the behavior of this control signal generated by the M-FRAP towards the DTE. inactive-always (1) - signal is permanentl… |
| 1.3.6.1.4.1.485.8.2.4.19 | mfrapCfgDteDsrOutput | 1 | 1 | Specifies the behavior of this control signal generated by the M-FRAP towards the DTE. inactive-always (1) - signal is permanentl… |
| 1.3.6.1.4.1.485.8.2.4.20 | mfrapCfgDteCtsOutput | 1 | 1 | Specifies the behavior of this control signal generated by the M-FRAP towards the DTE. inactive-always (1) - signal is permanentl… |