Description 1
Chiller Model - Article Number - 1
Sources for this description
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.9839.2.1.3.100
Chiller Model - Article Number - 1
Identification
{1 3 6 1 4 1 9839 2 1 3 100}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.9839.2.1.3.100.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
chiller-name1 OBJECT-TYPE
SYNTAX Integer32 (0..999)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Chiller Model - Article Number - 1"
::= { integerObjects 100 }config_out4 OBJECT-TYPE
SYNTAX Integer32 (-32767..32767)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Type of device connected to output 4"
::= { integerObjects 100 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Chiller Model - Article Number - 1
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 2
Type of device connected to output 4
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: chiller-name1
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"chiller-name1",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"999",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Chiller Model - Article Number - 1\"",
"::=",
"{",
"integerObjects",
"100",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
999
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Chiller Model - Article Number - 1"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: KELVIN-pCOWeb-Chiller-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Same file in Observium Community.
Status in source: current.
Names: config_out4
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"config_out4",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32767",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Type of device connected to output 4\"",
"::=",
"{",
"integerObjects",
"100",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32767,
32767
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Type of device connected to output 4"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-fcp-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9839.2.1.3.51 | assist-sel, time-Min-Off-Freecooling-Chiller-timing, min_volt_f2, stn, defrost_t4_mm, versione_sw_hg, f7, sgl_ore_comp1, defrost_t6_dd, swrel | 0 | 0 | 0= no comp assist, 1=one comp assist, 2= two comp assist, 3... 4... |
| 1.3.6.1.4.1.9839.2.1.3.52 | wtrvlv-sel, time-Min-Different-Freecooling-Chiller-timing, max_volt_f3, durata_pulizia, rit_acc_comp, p5, sgl_ore_comp2, defrost_t6_hh, lt_al_thrsh_al | 0 | 0 | Water valve type 0=none, 1=chill, 2=Engy, 3=Aux chill, 4=Disc Reg |
| 1.3.6.1.4.1.9839.2.1.3.53 | wtrvlv-volts-sel, time-Min-Same-Freecooling-Chiller-timing, triac_durat_f4, par_ora1, th, rit_spegn_comp, p9, defrost_t6_mm, sg_ore_comp, di1_config_a4 | 0 | 0 | Water valve voltage 0= 0-10, 1=2-10, 2=7-10, 3=6-9, 4=4-7 |
| 1.3.6.1.4.1.9839.2.1.3.54 | hum-volts, integral-Time-Freeccoling-Valve-PID, min_out_val_f7, par_ora2, tdow, p10, in_rampa_p3v, tm, hour_comp1, di2_config_a5 | 0 | 0 | % of 10volts of analog output #2 |
| 1.3.6.1.4.1.9839.2.1.3.55 | dehum-hours-h, derivative-Time-Freeccoling-Valve-PID, max_out_val_f8, manual_position, p11, fin_rampa_p3v, th, hour_l_comp1, comp_off_ext_a6 | 0 | 0 | Dehumidifier Runtime - High |
| 1.3.6.1.4.1.9839.2.1.3.56 | dehum-hours-l, output-Address-Valve-Freecooling, min_on_time_c1, posizione_valvola_perc, tempo_acc_pompa, p6, in_rampa_n3v, td, hour_comp2, tm_delay_id_a7 | 0 | 0 | Dehumidifier Runtime - Low |
| 1.3.6.1.4.1.9839.2.1.3.57 | delay-Freecooling-Thermal-Exclusion, min_off_time_c2, modello_valvola, h7, fin_rampa_n3v, hour_l_comp2, temp_al_del_ad | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.3.58 | autoflush-dly, n-of-alarm-External-Dry-Cooler, t_betw_2_on_c3, ti_int, tempo_run, hour_comp3, cnf_di_virt_a8 | 0 | 0 | Time between drain cycles 0=12hr, 1=24hr, 2=48hr, 3=96hr, 4=None |
| 1.3.6.1.4.1.9839.2.1.3.59 | y4-out, delay-Alarm-Static-Pressure, t_comp_2_on_c4, ti_low, h13, rit_syson, hour_l_comp3, en_lan_di2_a9 | 0 | 0 | Value sent to optional analog output#1 |
| 1.3.6.1.4.1.9839.2.1.3.60 | y5-out, n-of-Alarm-Static-Pressure, t_comp_2_off_c5, tipogas, h6, hour_comp4, en_mt_al_slv_ra | 0 | 0 | Value sent to optional analog output#2 |
| 1.3.6.1.4.1.9839.2.1.3.61 | air-flow, delay-Warning-Static-Pressure, t_comp_fan_c7, delay_pressure_probe_alarm, h10, vr1cen, hour_l_comp4, fans_mng_f0 | 0 | 0 | Current Fan Airflow - Based on calculated Pressure Diff formula |
| 1.3.6.1.4.1.9839.2.1.3.62 | opt-snsr1-name, n-of-Warning-Static-Pressure, off_fan_d_fd, tipo_sonda_eva, vr2cen, hour_comp5 | 0 | 0 | Name of the sensor |
| 1.3.6.1.4.1.9839.2.1.3.63 | opt-sns-1-ain-type, n-of-Alarm-Differential-Pressure, on_dalay_hg, ore_mac, hour_l_comp5, fan_0_cmp_0_f2 | 0 | 0 | Analog Sensor 1 Type {0=NTC 1=PT1000 2=0-1VDC 3=0-10VDC 4=4-20mA 5=ON/OFF 6=0-5VDC 7=NTC HT 8=-50T90 9=10T170} |
| 1.3.6.1.4.1.9839.2.1.3.64 | opt-snsr2-name, priming-Time-Hydraulic-Pressure, en_rotat_c6, cmp_start_valve_position, hour_comp6, fan_0_on_def_f3 | 0 | 0 | Name of the sensor |
| 1.3.6.1.4.1.9839.2.1.3.65 | opt-sns-2-ain-type, delay-priming-Time-Hydraulic-Pressure, d_flow_s_p1, dd_1, ore_comp1, hour_l_comp6, fan_rele_f4 | 0 | 0 | Analog Sensor 2 Type {0=NTC 1=PT1000 2=0-1VDC 3=0-10VDC 4=4-20mA 5=ON/OFF 6=0-5VDC 7=NTC HT 8=-50T90 9=10T170} |
| 1.3.6.1.4.1.9839.2.1.3.66 | opt-snsr3-name, output-Address-Alarm-Static-Pressure, d_flow_run_p2, hh_1, ore_comp2, h_hour_fan1, tm_off_drip_fd | 0 | 0 | Name of the sensor |
| 1.3.6.1.4.1.9839.2.1.3.67 | opt-sns-3-ain-type, n-of-Alarm-Flow-Rate, lp_delay_p3, mm_1, h1, x_h_main_fan, l_hour_fan1 | 0 | 0 | Analog Sensor 3 Type {0=NTC 1=PT1000 2=0-1VDC 3=0-10VDC 4=4-20mA 5=ON/OFF 6=0-5VDC 7=NTC HT 8=-50T90 9=10T170} |
| 1.3.6.1.4.1.9839.2.1.3.68 | opt-snsr4-name, priming-Time-Flow-Rate, al_prb_delay_pa, dd_2, h2, x_h_valve_comp1, h_hour_fan2, relay4_mode_h1 | 0 | 0 | Name of the sensor |
| 1.3.6.1.4.1.9839.2.1.3.69 | opt-sns-4-ain-type, delay-priming-Time-Flow-Rate, al_gen_delay_pc, hh_2, x_h_valve_comp2, l_hour_fan2, en_dis_keyb_h2 | 0 | 0 | Analog Sensor 4 Type {0=NTC 1=PT1000 2=0-1VDC 3=0-10VDC 4=4-20mA 5=ON/OFF 6=0-5VDC 7=NTC HT 8=-50T90 9=10T170} |
| 1.3.6.1.4.1.9839.2.1.3.70 | cw-fan-speed-bms, bms-address-IDENT, t_slot_cfg_rt, mm_2, f5, h_hour_fan3, remote_control | 0 | 0 | CW Fan speed (%) sent via BMS |
| 1.3.6.1.4.1.9839.2.1.3.71 | dx-fan-speed-bms, fan_time_fe, dd_3, d1, l_hour_fan3 | 0 | 0 | DX Fan speed (%) sent via BMS |
| 1.3.6.1.4.1.9839.2.1.3.72 | fan-speed-max, abilitazione_allarme_fumo, hh_3, d2, h_hour_fan4 | 0 | 0 | Maximum Fan speed (% of output) modulation. |
| 1.3.6.1.4.1.9839.2.1.3.73 | fan-speed-min, abilitazione_allarme_cf, mm_3, d5, l_hour_fan4 | 0 | 0 | Minimum Fan speed (% of output) modulation from pressure. |
| 1.3.6.1.4.1.9839.2.1.3.74 | fan-pr-sp, abilitazione_allarme_ht, dd_4, d6, sg_ore_fan, lan_address_sa | 0 | 0 | Fan pressure setpoint (0.01 inches of water) |
| 1.3.6.1.4.1.9839.2.1.3.75 | fan-pr-band, hh_4, d7, version, lan_lenght_sn | 0 | 0 | Fan pressure band (0.01 inches of water) |
| 1.3.6.1.4.1.9839.2.1.3.76 | fan-af-max, mm_4, d8, h_hour_fan5, hh_def_sched1 | 0 | 0 | Maximum air flow limit of setpoint from BMS or valve modulation. |
| 1.3.6.1.4.1.9839.2.1.3.77 | fan-af-min, dd_5, d9, l_hour_fan5, mm_def_sched1 | 0 | 0 | Minimum air flow limit of setpoint from BMS or valve modulation. |
| 1.3.6.1.4.1.9839.2.1.3.78 | fan-kfactor, hh_5, d10, time_on_black_out, hh_def_sched2 | 0 | 0 | Fan K Factor |
| 1.3.6.1.4.1.9839.2.1.3.79 | num-fans, mm_5, d12, config_in1, mm_def_sched2 | 0 | 0 | Number of fans installed in this unit |
| 1.3.6.1.4.1.9839.2.1.3.80 | dd_6, d13, config_in2, hh_def_sched3 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.3.81 | ht2-hours-h, hh_6, config_in3, mm_def_sched3 | 0 | 0 | Heater 2 Runtime - high |
| 1.3.6.1.4.1.9839.2.1.3.82 | ht2-hours-l, mm_6, config_in4, hh_def_sched4 | 0 | 0 | Heater 2 Runtime - low |
| 1.3.6.1.4.1.9839.2.1.3.83 | ht3-hours-h, dd_7, r27, config_in5, mm_def_sched4 | 0 | 0 | Heater 3 Runtime - high |
| 1.3.6.1.4.1.9839.2.1.3.84 | ht3-hours-l, hh_7, l4, config_in6, hh_def_sched5 | 0 | 0 | Heater 3 Runtime - low |
| 1.3.6.1.4.1.9839.2.1.3.85 | engy-hours-h, mm_7, h16, config_in7, mm_def_sched5 | 0 | 0 | Energy Saver Runtime - This optional point applies to energy saver units only -high |
| 1.3.6.1.4.1.9839.2.1.3.86 | engy-hours-l, dd_8, p12, config_in8, hh_def_sched6 | 0 | 0 | Energy Saver Runtime - This optional point applies to energy saver units only - low |
| 1.3.6.1.4.1.9839.2.1.3.87 | cw-hours-h, hh_8, l1, config_in9, mm_def_sched6 | 0 | 0 | Chilled Water Runtime - This applies to chilled water units only - high |
| 1.3.6.1.4.1.9839.2.1.3.88 | cw-hours-l, mm_8, l2, config_in10, hh_def_sched7 | 0 | 0 | Chilled Water Runtime - This applies to chilled water units only - low |
| 1.3.6.1.4.1.9839.2.1.3.89 | c3-hours-h, l3, config_in11, mm_def_sched7 | 0 | 0 | Compressor 3 Runtime - This applies when unit has four stages tandem compressors - high |
| 1.3.6.1.4.1.9839.2.1.3.90 | c3-hours-l, l5, config_in12, hh_def_sched8 | 0 | 0 | Compressor 3 Runtime - This applies when unit has four stages tandem compressors - low |
| 1.3.6.1.4.1.9839.2.1.3.91 | c4-hours-l, r14, config_in13, mm_def_sched8 | 0 | 0 | Compressor 4 Runtime - This applies when unit has four stages tandem compressors. - high |
| 1.3.6.1.4.1.9839.2.1.3.92 | c4-hours-h, config_in14, hh_clock | 0 | 0 | Compressor 4 Runtime - This applies when unit has four stages tandem compressors. - low |
| 1.3.6.1.4.1.9839.2.1.3.93 | cond-hours-h, config_in15, mm_clock | 0 | 0 | Condenser Runtime - high |
| 1.3.6.1.4.1.9839.2.1.3.94 | cond-hours-l, config_in16, hh_vis | 0 | 0 | Condenser Runtime - low |
| 1.3.6.1.4.1.9839.2.1.3.95 | dx-fan-speed, config_in17, mm_vis | 0 | 0 | Fan speed (% of output) when compressor cooling. |
| 1.3.6.1.4.1.9839.2.1.3.96 | cw-fan-speed, config_in18 | 0 | 0 | Fan speed (% of output) when cold water cooling. |
| 1.3.6.1.4.1.9839.2.1.3.97 | fan-af-dx-sp, config_out1 | 0 | 0 | Fan air flow setpoint for DX unit (cfm) |
| 1.3.6.1.4.1.9839.2.1.3.98 | fan-af-cw-sp, config_out2 | 0 | 0 | Fan air flow setpoint for CW unit (cfm) |
| 1.3.6.1.4.1.9839.2.1.3.99 | zm-airflow-sp, chiller-name0, config_out3 | 0 | 0 | Zone Airflow Setpoint kcfm |
| 1.3.6.1.4.1.9839.2.1.3.101 | config_out5 | 0 | 0 |