OID reference
1.3.6.1.4.1.9839.2.1.3.56
Dehumidifier Runtime - Low
Identification
{1 3 6 1 4 1 9839 2 1 3 56}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.9839.2.1.3.56.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 10 distinct definitions; some records may not include a definition.
posizione_valvola_perc OBJECT-TYPE
SYNTAX Integer32 (0..100)
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Valve opening"
::= { integerObjects 56 }min_on_time_c1 OBJECT-TYPE
SYNTAX Integer32 (0..300)
UNITS "sec"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Minimum ON time"
DEFVAL { 60 }
::= { integerObjects 56 }output-Address-Valve-Freecooling OBJECT-TYPE
SYNTAX Integer32 (0..6)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Output Address Valve Freecooling"
::= { integerObjects 56 }tm_delay_id_a7 OBJECT-TYPE
SYNTAX Integer32 (0..199)
UNITS "min"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Detection delay time for the delayed alarm input"
DEFVAL { 0 }
::= { integerObjects 56 }p6 OBJECT-TYPE
SYNTAX Integer32 (0..600)
UNITS "s"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "ID3 alarm delay."
DEFVAL { 5 }
::= { integerObjects 56 }tempo_acc_pompa OBJECT-TYPE
SYNTAX Integer32 (1..150)
UNITS "min"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Minimum time between two pump starts"
DEFVAL { 30 }
::= { integerObjects 56 }in_rampa_n3v OBJECT-TYPE
SYNTAX Integer32 (0..100)
UNITS "%"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Warm 3p valve start ramp"
DEFVAL { 0 }
::= { integerObjects 56 }dehum-hours-l OBJECT-TYPE
SYNTAX Integer32 (-32768..32767)
UNITS "hour"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Dehumidifier Runtime - Low"
DEFVAL { 0 }
::= { integerObjects 56 }hour_comp2 OBJECT-TYPE
SYNTAX Integer32 (-32767..32767)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "High part, operating hours compressor 2"
::= { integerObjects 56 }td OBJECT-TYPE
SYNTAX Integer32 (1..7)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Current day of the week"
::= { integerObjects 56 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 2
Valve opening
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 3
Minimum ON time
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 4
Output Address Valve Freecooling
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 5
Detection delay time for the delayed alarm input
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 6
ID3 alarm delay.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 7
Minimum time between two pump starts
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 8
Warm 3p valve start ramp
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 9
High part, operating hours compressor 2
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 10
Current day of the week
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: posizione_valvola_perc
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"posizione_valvola_perc",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"100",
")",
"UNITS",
[
"literal",
"222522"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Valve opening\"",
"::=",
"{",
"integerObjects",
"56",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
100
]
]
]
],
[
"UNITS",
"%"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Valve opening"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mastercase-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Status in source: current.
Names: min_on_time_c1
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"min_on_time_c1",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"300",
")",
"UNITS",
[
"literal",
"2273656322"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Minimum ON time\"",
"DEFVAL",
"{",
"60",
"}",
"::=",
"{",
"integerObjects",
"56",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
300
]
]
]
],
[
"UNITS",
"sec"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Minimum ON time"
],
null,
null,
null,
[
"DEFVAL",
60
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-uac-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: output-Address-Valve-Freecooling
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"output-Address-Valve-Freecooling",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"6",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Output Address Valve Freecooling\"",
"::=",
"{",
"integerObjects",
"56",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
6
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Output Address Valve Freecooling"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: KELVIN-pCOWeb-Chiller-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Same file in Observium Community.
Status in source: current.
Names: tm_delay_id_a7
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"tm_delay_id_a7",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"199",
")",
"UNITS",
[
"literal",
"226d696e22"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Detection delay time for the delayed alarm input\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"integerObjects",
"56",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
199
]
]
]
],
[
"UNITS",
"min"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Detection delay time for the delayed alarm input"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-irmpx-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.
· Download CAREL-irmpx-MIBStatus in source: current.
Names: p6
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"p6",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"600",
")",
"UNITS",
[
"literal",
"227322"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"ID3 alarm delay.\"",
"DEFVAL",
"{",
"5",
"}",
"::=",
"{",
"integerObjects",
"56",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
600
]
]
]
],
[
"UNITS",
"s"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"ID3 alarm delay."
],
null,
null,
null,
[
"DEFVAL",
5
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-aria-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: tempo_acc_pompa
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"tempo_acc_pompa",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"1",
".",
".",
"150",
")",
"UNITS",
[
"literal",
"226d696e22"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Minimum time between two pump starts\"",
"DEFVAL",
"{",
"30",
"}",
"::=",
"{",
"integerObjects",
"56",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
1,
150
]
]
]
],
[
"UNITS",
"min"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Minimum time between two pump starts"
],
null,
null,
null,
[
"DEFVAL",
30
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-uchiller_cmp-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: in_rampa_n3v
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"in_rampa_n3v",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"100",
")",
"UNITS",
[
"literal",
"222522"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Warm 3p valve start ramp\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"integerObjects",
"56",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
100
]
]
]
],
[
"UNITS",
"%"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Warm 3p valve start ramp"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-cdz_pco-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: dehum-hours-l
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dehum-hours-l",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32768",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"22686f757222"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Dehumidifier Runtime - Low\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"integerObjects",
"56",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32768,
32767
]
]
]
],
[
"UNITS",
"hour"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Dehumidifier Runtime - Low"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the LibreNMS archive.
Module: DataAire-dap4-al-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Vendor MIB copy from the Observium Community archive.
Module: DataAire-dap4-al-MIB
Same published definition (formatting differs; exact original is in the source file)
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: hour_comp2
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"hour_comp2",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32767",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"High part, operating hours compressor 2\"",
"::=",
"{",
"integerObjects",
"56",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32767,
32767
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"High part, operating hours compressor 2"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-fcp-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: td
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"td",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"1",
".",
".",
"7",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Current day of the week\"",
"::=",
"{",
"integerObjects",
"56",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
1,
7
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Current day of the week"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-powersplit-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9839.2.1.3.51 | assist-sel, time-Min-Off-Freecooling-Chiller-timing, min_volt_f2, stn, defrost_t4_mm, versione_sw_hg, f7, sgl_ore_comp1, defrost_t6_dd, swrel | 0 | 0 | 0= no comp assist, 1=one comp assist, 2= two comp assist, 3... 4... |
| 1.3.6.1.4.1.9839.2.1.3.52 | wtrvlv-sel, time-Min-Different-Freecooling-Chiller-timing, max_volt_f3, durata_pulizia, rit_acc_comp, p5, sgl_ore_comp2, defrost_t6_hh, lt_al_thrsh_al | 0 | 0 | Water valve type 0=none, 1=chill, 2=Engy, 3=Aux chill, 4=Disc Reg |
| 1.3.6.1.4.1.9839.2.1.3.53 | wtrvlv-volts-sel, time-Min-Same-Freecooling-Chiller-timing, triac_durat_f4, par_ora1, th, rit_spegn_comp, p9, defrost_t6_mm, sg_ore_comp, di1_config_a4 | 0 | 0 | Water valve voltage 0= 0-10, 1=2-10, 2=7-10, 3=6-9, 4=4-7 |
| 1.3.6.1.4.1.9839.2.1.3.54 | hum-volts, integral-Time-Freeccoling-Valve-PID, min_out_val_f7, par_ora2, tdow, p10, in_rampa_p3v, tm, hour_comp1, di2_config_a5 | 0 | 0 | % of 10volts of analog output #2 |
| 1.3.6.1.4.1.9839.2.1.3.55 | dehum-hours-h, derivative-Time-Freeccoling-Valve-PID, max_out_val_f8, manual_position, p11, fin_rampa_p3v, th, hour_l_comp1, comp_off_ext_a6 | 0 | 0 | Dehumidifier Runtime - High |
| 1.3.6.1.4.1.9839.2.1.3.57 | delay-Freecooling-Thermal-Exclusion, min_off_time_c2, modello_valvola, h7, fin_rampa_n3v, hour_l_comp2, temp_al_del_ad | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.3.58 | autoflush-dly, n-of-alarm-External-Dry-Cooler, t_betw_2_on_c3, ti_int, tempo_run, hour_comp3, cnf_di_virt_a8 | 0 | 0 | Time between drain cycles 0=12hr, 1=24hr, 2=48hr, 3=96hr, 4=None |
| 1.3.6.1.4.1.9839.2.1.3.59 | y4-out, delay-Alarm-Static-Pressure, t_comp_2_on_c4, ti_low, h13, rit_syson, hour_l_comp3, en_lan_di2_a9 | 0 | 0 | Value sent to optional analog output#1 |
| 1.3.6.1.4.1.9839.2.1.3.60 | y5-out, n-of-Alarm-Static-Pressure, t_comp_2_off_c5, tipogas, h6, hour_comp4, en_mt_al_slv_ra | 0 | 0 | Value sent to optional analog output#2 |
| 1.3.6.1.4.1.9839.2.1.3.61 | air-flow, delay-Warning-Static-Pressure, t_comp_fan_c7, delay_pressure_probe_alarm, h10, vr1cen, hour_l_comp4, fans_mng_f0 | 0 | 0 | Current Fan Airflow - Based on calculated Pressure Diff formula |
| 1.3.6.1.4.1.9839.2.1.3.62 | opt-snsr1-name, n-of-Warning-Static-Pressure, off_fan_d_fd, tipo_sonda_eva, vr2cen, hour_comp5 | 0 | 0 | Name of the sensor |
| 1.3.6.1.4.1.9839.2.1.3.63 | opt-sns-1-ain-type, n-of-Alarm-Differential-Pressure, on_dalay_hg, ore_mac, hour_l_comp5, fan_0_cmp_0_f2 | 0 | 0 | Analog Sensor 1 Type {0=NTC 1=PT1000 2=0-1VDC 3=0-10VDC 4=4-20mA 5=ON/OFF 6=0-5VDC 7=NTC HT 8=-50T90 9=10T170} |
| 1.3.6.1.4.1.9839.2.1.3.64 | opt-snsr2-name, priming-Time-Hydraulic-Pressure, en_rotat_c6, cmp_start_valve_position, hour_comp6, fan_0_on_def_f3 | 0 | 0 | Name of the sensor |
| 1.3.6.1.4.1.9839.2.1.3.65 | opt-sns-2-ain-type, delay-priming-Time-Hydraulic-Pressure, d_flow_s_p1, dd_1, ore_comp1, hour_l_comp6, fan_rele_f4 | 0 | 0 | Analog Sensor 2 Type {0=NTC 1=PT1000 2=0-1VDC 3=0-10VDC 4=4-20mA 5=ON/OFF 6=0-5VDC 7=NTC HT 8=-50T90 9=10T170} |
| 1.3.6.1.4.1.9839.2.1.3.66 | opt-snsr3-name, output-Address-Alarm-Static-Pressure, d_flow_run_p2, hh_1, ore_comp2, h_hour_fan1, tm_off_drip_fd | 0 | 0 | Name of the sensor |
| 1.3.6.1.4.1.9839.2.1.3.67 | opt-sns-3-ain-type, n-of-Alarm-Flow-Rate, lp_delay_p3, mm_1, h1, x_h_main_fan, l_hour_fan1 | 0 | 0 | Analog Sensor 3 Type {0=NTC 1=PT1000 2=0-1VDC 3=0-10VDC 4=4-20mA 5=ON/OFF 6=0-5VDC 7=NTC HT 8=-50T90 9=10T170} |
| 1.3.6.1.4.1.9839.2.1.3.68 | opt-snsr4-name, priming-Time-Flow-Rate, al_prb_delay_pa, dd_2, h2, x_h_valve_comp1, h_hour_fan2, relay4_mode_h1 | 0 | 0 | Name of the sensor |
| 1.3.6.1.4.1.9839.2.1.3.69 | opt-sns-4-ain-type, delay-priming-Time-Flow-Rate, al_gen_delay_pc, hh_2, x_h_valve_comp2, l_hour_fan2, en_dis_keyb_h2 | 0 | 0 | Analog Sensor 4 Type {0=NTC 1=PT1000 2=0-1VDC 3=0-10VDC 4=4-20mA 5=ON/OFF 6=0-5VDC 7=NTC HT 8=-50T90 9=10T170} |
| 1.3.6.1.4.1.9839.2.1.3.70 | cw-fan-speed-bms, bms-address-IDENT, t_slot_cfg_rt, mm_2, f5, h_hour_fan3, remote_control | 0 | 0 | CW Fan speed (%) sent via BMS |
| 1.3.6.1.4.1.9839.2.1.3.71 | dx-fan-speed-bms, fan_time_fe, dd_3, d1, l_hour_fan3 | 0 | 0 | DX Fan speed (%) sent via BMS |
| 1.3.6.1.4.1.9839.2.1.3.72 | fan-speed-max, abilitazione_allarme_fumo, hh_3, d2, h_hour_fan4 | 0 | 0 | Maximum Fan speed (% of output) modulation. |
| 1.3.6.1.4.1.9839.2.1.3.73 | fan-speed-min, abilitazione_allarme_cf, mm_3, d5, l_hour_fan4 | 0 | 0 | Minimum Fan speed (% of output) modulation from pressure. |
| 1.3.6.1.4.1.9839.2.1.3.74 | fan-pr-sp, abilitazione_allarme_ht, dd_4, d6, sg_ore_fan, lan_address_sa | 0 | 0 | Fan pressure setpoint (0.01 inches of water) |
| 1.3.6.1.4.1.9839.2.1.3.75 | fan-pr-band, hh_4, d7, version, lan_lenght_sn | 0 | 0 | Fan pressure band (0.01 inches of water) |
| 1.3.6.1.4.1.9839.2.1.3.76 | fan-af-max, mm_4, d8, h_hour_fan5, hh_def_sched1 | 0 | 0 | Maximum air flow limit of setpoint from BMS or valve modulation. |
| 1.3.6.1.4.1.9839.2.1.3.77 | fan-af-min, dd_5, d9, l_hour_fan5, mm_def_sched1 | 0 | 0 | Minimum air flow limit of setpoint from BMS or valve modulation. |
| 1.3.6.1.4.1.9839.2.1.3.78 | fan-kfactor, hh_5, d10, time_on_black_out, hh_def_sched2 | 0 | 0 | Fan K Factor |
| 1.3.6.1.4.1.9839.2.1.3.79 | num-fans, mm_5, d12, config_in1, mm_def_sched2 | 0 | 0 | Number of fans installed in this unit |
| 1.3.6.1.4.1.9839.2.1.3.80 | dd_6, d13, config_in2, hh_def_sched3 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.3.81 | ht2-hours-h, hh_6, config_in3, mm_def_sched3 | 0 | 0 | Heater 2 Runtime - high |
| 1.3.6.1.4.1.9839.2.1.3.82 | ht2-hours-l, mm_6, config_in4, hh_def_sched4 | 0 | 0 | Heater 2 Runtime - low |
| 1.3.6.1.4.1.9839.2.1.3.83 | ht3-hours-h, dd_7, r27, config_in5, mm_def_sched4 | 0 | 0 | Heater 3 Runtime - high |
| 1.3.6.1.4.1.9839.2.1.3.84 | ht3-hours-l, hh_7, l4, config_in6, hh_def_sched5 | 0 | 0 | Heater 3 Runtime - low |
| 1.3.6.1.4.1.9839.2.1.3.85 | engy-hours-h, mm_7, h16, config_in7, mm_def_sched5 | 0 | 0 | Energy Saver Runtime - This optional point applies to energy saver units only -high |
| 1.3.6.1.4.1.9839.2.1.3.86 | engy-hours-l, dd_8, p12, config_in8, hh_def_sched6 | 0 | 0 | Energy Saver Runtime - This optional point applies to energy saver units only - low |
| 1.3.6.1.4.1.9839.2.1.3.87 | cw-hours-h, hh_8, l1, config_in9, mm_def_sched6 | 0 | 0 | Chilled Water Runtime - This applies to chilled water units only - high |
| 1.3.6.1.4.1.9839.2.1.3.88 | cw-hours-l, mm_8, l2, config_in10, hh_def_sched7 | 0 | 0 | Chilled Water Runtime - This applies to chilled water units only - low |
| 1.3.6.1.4.1.9839.2.1.3.89 | c3-hours-h, l3, config_in11, mm_def_sched7 | 0 | 0 | Compressor 3 Runtime - This applies when unit has four stages tandem compressors - high |
| 1.3.6.1.4.1.9839.2.1.3.90 | c3-hours-l, l5, config_in12, hh_def_sched8 | 0 | 0 | Compressor 3 Runtime - This applies when unit has four stages tandem compressors - low |
| 1.3.6.1.4.1.9839.2.1.3.91 | c4-hours-l, r14, config_in13, mm_def_sched8 | 0 | 0 | Compressor 4 Runtime - This applies when unit has four stages tandem compressors. - high |
| 1.3.6.1.4.1.9839.2.1.3.92 | c4-hours-h, config_in14, hh_clock | 0 | 0 | Compressor 4 Runtime - This applies when unit has four stages tandem compressors. - low |
| 1.3.6.1.4.1.9839.2.1.3.93 | cond-hours-h, config_in15, mm_clock | 0 | 0 | Condenser Runtime - high |
| 1.3.6.1.4.1.9839.2.1.3.94 | cond-hours-l, config_in16, hh_vis | 0 | 0 | Condenser Runtime - low |
| 1.3.6.1.4.1.9839.2.1.3.95 | dx-fan-speed, config_in17, mm_vis | 0 | 0 | Fan speed (% of output) when compressor cooling. |
| 1.3.6.1.4.1.9839.2.1.3.96 | cw-fan-speed, config_in18 | 0 | 0 | Fan speed (% of output) when cold water cooling. |
| 1.3.6.1.4.1.9839.2.1.3.97 | fan-af-dx-sp, config_out1 | 0 | 0 | Fan air flow setpoint for DX unit (cfm) |
| 1.3.6.1.4.1.9839.2.1.3.98 | fan-af-cw-sp, config_out2 | 0 | 0 | Fan air flow setpoint for CW unit (cfm) |
| 1.3.6.1.4.1.9839.2.1.3.99 | zm-airflow-sp, chiller-name0, config_out3 | 0 | 0 | Zone Airflow Setpoint kcfm |
| 1.3.6.1.4.1.9839.2.1.3.100 | chiller-name1, config_out4 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.3.101 | config_out5 | 0 | 0 |