Description 1
Low part, operating hours compressor 2
Sources for this description
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.9839.2.1.3.57
Low part, operating hours compressor 2
Identification
{1 3 6 1 4 1 9839 2 1 3 57}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.9839.2.1.3.57.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 7 distinct definitions; some records may not include a definition.
hour_l_comp2 OBJECT-TYPE
SYNTAX Integer32 (-32767..32767)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Low part, operating hours compressor 2"
::= { integerObjects 57 }min_off_time_c2 OBJECT-TYPE
SYNTAX Integer32 (0..900)
UNITS "sec"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Minimum OFF time"
DEFVAL { 60 }
::= { integerObjects 57 }delay-Freecooling-Thermal-Exclusion OBJECT-TYPE
SYNTAX Integer32 (0..999)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Delay Freecoolimg Thermal Exclusion"
::= { integerObjects 57 }fin_rampa_n3v OBJECT-TYPE
SYNTAX Integer32 (0..100)
UNITS "%"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Warm 3p valve end ramp"
DEFVAL { 100 }
::= { integerObjects 57 }temp_al_del_ad OBJECT-TYPE
SYNTAX Integer32 (0..199)
UNITS "min"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Temperature alarm delay"
DEFVAL { 120 }
::= { integerObjects 57 }modello_valvola OBJECT-TYPE
SYNTAX Integer32 (0..2)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Valve model"
DEFVAL { 0 }
::= { integerObjects 57 }h7 OBJECT-TYPE
SYNTAX Integer32 (0..2)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Small LCD reading selection."
DEFVAL { 1 }
::= { integerObjects 57 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Low part, operating hours compressor 2
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 2
Minimum OFF time
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 3
Delay Freecoolimg Thermal Exclusion
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 4
Warm 3p valve end ramp
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 5
Temperature alarm delay
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 6
Valve model
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 7
Small LCD reading selection.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: hour_l_comp2
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"hour_l_comp2",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32767",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Low part, operating hours compressor 2\"",
"::=",
"{",
"integerObjects",
"57",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32767,
32767
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Low part, operating hours compressor 2"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-fcp-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Status in source: current.
Names: min_off_time_c2
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"min_off_time_c2",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"900",
")",
"UNITS",
[
"literal",
"2273656322"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Minimum OFF time\"",
"DEFVAL",
"{",
"60",
"}",
"::=",
"{",
"integerObjects",
"57",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
900
]
]
]
],
[
"UNITS",
"sec"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Minimum OFF time"
],
null,
null,
null,
[
"DEFVAL",
60
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-uac-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: delay-Freecooling-Thermal-Exclusion
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"delay-Freecooling-Thermal-Exclusion",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"999",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Delay Freecoolimg Thermal Exclusion\"",
"::=",
"{",
"integerObjects",
"57",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
999
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Delay Freecoolimg Thermal Exclusion"
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: KELVIN-pCOWeb-Chiller-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Same file in Observium Community.
Status in source: current.
Names: fin_rampa_n3v
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fin_rampa_n3v",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"100",
")",
"UNITS",
[
"literal",
"222522"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Warm 3p valve end ramp\"",
"DEFVAL",
"{",
"100",
"}",
"::=",
"{",
"integerObjects",
"57",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
100
]
]
]
],
[
"UNITS",
"%"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Warm 3p valve end ramp"
],
null,
null,
null,
[
"DEFVAL",
100
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-cdz_pco-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: temp_al_del_ad
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"temp_al_del_ad",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"199",
")",
"UNITS",
[
"literal",
"226d696e22"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Temperature alarm delay\"",
"DEFVAL",
"{",
"120",
"}",
"::=",
"{",
"integerObjects",
"57",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
199
]
]
]
],
[
"UNITS",
"min"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Temperature alarm delay"
],
null,
null,
null,
[
"DEFVAL",
120
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-irmpx-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.
· Download CAREL-irmpx-MIBStatus in source: current.
Names: modello_valvola
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"modello_valvola",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"2",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Valve model\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"integerObjects",
"57",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
2
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Valve model"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mastercase-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: h7
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"h7",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"2",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Small LCD reading selection.\"",
"DEFVAL",
"{",
"1",
"}",
"::=",
"{",
"integerObjects",
"57",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
2
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Small LCD reading selection."
],
null,
null,
null,
[
"DEFVAL",
1
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-aria-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9839.2.1.3.51 | assist-sel, time-Min-Off-Freecooling-Chiller-timing, min_volt_f2, stn, defrost_t4_mm, versione_sw_hg, f7, sgl_ore_comp1, defrost_t6_dd, swrel | 0 | 0 | 0= no comp assist, 1=one comp assist, 2= two comp assist, 3... 4... |
| 1.3.6.1.4.1.9839.2.1.3.52 | wtrvlv-sel, time-Min-Different-Freecooling-Chiller-timing, max_volt_f3, durata_pulizia, rit_acc_comp, p5, sgl_ore_comp2, defrost_t6_hh, lt_al_thrsh_al | 0 | 0 | Water valve type 0=none, 1=chill, 2=Engy, 3=Aux chill, 4=Disc Reg |
| 1.3.6.1.4.1.9839.2.1.3.53 | wtrvlv-volts-sel, time-Min-Same-Freecooling-Chiller-timing, triac_durat_f4, par_ora1, th, rit_spegn_comp, p9, defrost_t6_mm, sg_ore_comp, di1_config_a4 | 0 | 0 | Water valve voltage 0= 0-10, 1=2-10, 2=7-10, 3=6-9, 4=4-7 |
| 1.3.6.1.4.1.9839.2.1.3.54 | hum-volts, integral-Time-Freeccoling-Valve-PID, min_out_val_f7, par_ora2, tdow, p10, in_rampa_p3v, tm, hour_comp1, di2_config_a5 | 0 | 0 | % of 10volts of analog output #2 |
| 1.3.6.1.4.1.9839.2.1.3.55 | dehum-hours-h, derivative-Time-Freeccoling-Valve-PID, max_out_val_f8, manual_position, p11, fin_rampa_p3v, th, hour_l_comp1, comp_off_ext_a6 | 0 | 0 | Dehumidifier Runtime - High |
| 1.3.6.1.4.1.9839.2.1.3.56 | dehum-hours-l, output-Address-Valve-Freecooling, min_on_time_c1, posizione_valvola_perc, tempo_acc_pompa, p6, in_rampa_n3v, td, hour_comp2, tm_delay_id_a7 | 0 | 0 | Dehumidifier Runtime - Low |
| 1.3.6.1.4.1.9839.2.1.3.58 | autoflush-dly, n-of-alarm-External-Dry-Cooler, t_betw_2_on_c3, ti_int, tempo_run, hour_comp3, cnf_di_virt_a8 | 0 | 0 | Time between drain cycles 0=12hr, 1=24hr, 2=48hr, 3=96hr, 4=None |
| 1.3.6.1.4.1.9839.2.1.3.59 | y4-out, delay-Alarm-Static-Pressure, t_comp_2_on_c4, ti_low, h13, rit_syson, hour_l_comp3, en_lan_di2_a9 | 0 | 0 | Value sent to optional analog output#1 |
| 1.3.6.1.4.1.9839.2.1.3.60 | y5-out, n-of-Alarm-Static-Pressure, t_comp_2_off_c5, tipogas, h6, hour_comp4, en_mt_al_slv_ra | 0 | 0 | Value sent to optional analog output#2 |
| 1.3.6.1.4.1.9839.2.1.3.61 | air-flow, delay-Warning-Static-Pressure, t_comp_fan_c7, delay_pressure_probe_alarm, h10, vr1cen, hour_l_comp4, fans_mng_f0 | 0 | 0 | Current Fan Airflow - Based on calculated Pressure Diff formula |
| 1.3.6.1.4.1.9839.2.1.3.62 | opt-snsr1-name, n-of-Warning-Static-Pressure, off_fan_d_fd, tipo_sonda_eva, vr2cen, hour_comp5 | 0 | 0 | Name of the sensor |
| 1.3.6.1.4.1.9839.2.1.3.63 | opt-sns-1-ain-type, n-of-Alarm-Differential-Pressure, on_dalay_hg, ore_mac, hour_l_comp5, fan_0_cmp_0_f2 | 0 | 0 | Analog Sensor 1 Type {0=NTC 1=PT1000 2=0-1VDC 3=0-10VDC 4=4-20mA 5=ON/OFF 6=0-5VDC 7=NTC HT 8=-50T90 9=10T170} |
| 1.3.6.1.4.1.9839.2.1.3.64 | opt-snsr2-name, priming-Time-Hydraulic-Pressure, en_rotat_c6, cmp_start_valve_position, hour_comp6, fan_0_on_def_f3 | 0 | 0 | Name of the sensor |
| 1.3.6.1.4.1.9839.2.1.3.65 | opt-sns-2-ain-type, delay-priming-Time-Hydraulic-Pressure, d_flow_s_p1, dd_1, ore_comp1, hour_l_comp6, fan_rele_f4 | 0 | 0 | Analog Sensor 2 Type {0=NTC 1=PT1000 2=0-1VDC 3=0-10VDC 4=4-20mA 5=ON/OFF 6=0-5VDC 7=NTC HT 8=-50T90 9=10T170} |
| 1.3.6.1.4.1.9839.2.1.3.66 | opt-snsr3-name, output-Address-Alarm-Static-Pressure, d_flow_run_p2, hh_1, ore_comp2, h_hour_fan1, tm_off_drip_fd | 0 | 0 | Name of the sensor |
| 1.3.6.1.4.1.9839.2.1.3.67 | opt-sns-3-ain-type, n-of-Alarm-Flow-Rate, lp_delay_p3, mm_1, h1, x_h_main_fan, l_hour_fan1 | 0 | 0 | Analog Sensor 3 Type {0=NTC 1=PT1000 2=0-1VDC 3=0-10VDC 4=4-20mA 5=ON/OFF 6=0-5VDC 7=NTC HT 8=-50T90 9=10T170} |
| 1.3.6.1.4.1.9839.2.1.3.68 | opt-snsr4-name, priming-Time-Flow-Rate, al_prb_delay_pa, dd_2, h2, x_h_valve_comp1, h_hour_fan2, relay4_mode_h1 | 0 | 0 | Name of the sensor |
| 1.3.6.1.4.1.9839.2.1.3.69 | opt-sns-4-ain-type, delay-priming-Time-Flow-Rate, al_gen_delay_pc, hh_2, x_h_valve_comp2, l_hour_fan2, en_dis_keyb_h2 | 0 | 0 | Analog Sensor 4 Type {0=NTC 1=PT1000 2=0-1VDC 3=0-10VDC 4=4-20mA 5=ON/OFF 6=0-5VDC 7=NTC HT 8=-50T90 9=10T170} |
| 1.3.6.1.4.1.9839.2.1.3.70 | cw-fan-speed-bms, bms-address-IDENT, t_slot_cfg_rt, mm_2, f5, h_hour_fan3, remote_control | 0 | 0 | CW Fan speed (%) sent via BMS |
| 1.3.6.1.4.1.9839.2.1.3.71 | dx-fan-speed-bms, fan_time_fe, dd_3, d1, l_hour_fan3 | 0 | 0 | DX Fan speed (%) sent via BMS |
| 1.3.6.1.4.1.9839.2.1.3.72 | fan-speed-max, abilitazione_allarme_fumo, hh_3, d2, h_hour_fan4 | 0 | 0 | Maximum Fan speed (% of output) modulation. |
| 1.3.6.1.4.1.9839.2.1.3.73 | fan-speed-min, abilitazione_allarme_cf, mm_3, d5, l_hour_fan4 | 0 | 0 | Minimum Fan speed (% of output) modulation from pressure. |
| 1.3.6.1.4.1.9839.2.1.3.74 | fan-pr-sp, abilitazione_allarme_ht, dd_4, d6, sg_ore_fan, lan_address_sa | 0 | 0 | Fan pressure setpoint (0.01 inches of water) |
| 1.3.6.1.4.1.9839.2.1.3.75 | fan-pr-band, hh_4, d7, version, lan_lenght_sn | 0 | 0 | Fan pressure band (0.01 inches of water) |
| 1.3.6.1.4.1.9839.2.1.3.76 | fan-af-max, mm_4, d8, h_hour_fan5, hh_def_sched1 | 0 | 0 | Maximum air flow limit of setpoint from BMS or valve modulation. |
| 1.3.6.1.4.1.9839.2.1.3.77 | fan-af-min, dd_5, d9, l_hour_fan5, mm_def_sched1 | 0 | 0 | Minimum air flow limit of setpoint from BMS or valve modulation. |
| 1.3.6.1.4.1.9839.2.1.3.78 | fan-kfactor, hh_5, d10, time_on_black_out, hh_def_sched2 | 0 | 0 | Fan K Factor |
| 1.3.6.1.4.1.9839.2.1.3.79 | num-fans, mm_5, d12, config_in1, mm_def_sched2 | 0 | 0 | Number of fans installed in this unit |
| 1.3.6.1.4.1.9839.2.1.3.80 | dd_6, d13, config_in2, hh_def_sched3 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.3.81 | ht2-hours-h, hh_6, config_in3, mm_def_sched3 | 0 | 0 | Heater 2 Runtime - high |
| 1.3.6.1.4.1.9839.2.1.3.82 | ht2-hours-l, mm_6, config_in4, hh_def_sched4 | 0 | 0 | Heater 2 Runtime - low |
| 1.3.6.1.4.1.9839.2.1.3.83 | ht3-hours-h, dd_7, r27, config_in5, mm_def_sched4 | 0 | 0 | Heater 3 Runtime - high |
| 1.3.6.1.4.1.9839.2.1.3.84 | ht3-hours-l, hh_7, l4, config_in6, hh_def_sched5 | 0 | 0 | Heater 3 Runtime - low |
| 1.3.6.1.4.1.9839.2.1.3.85 | engy-hours-h, mm_7, h16, config_in7, mm_def_sched5 | 0 | 0 | Energy Saver Runtime - This optional point applies to energy saver units only -high |
| 1.3.6.1.4.1.9839.2.1.3.86 | engy-hours-l, dd_8, p12, config_in8, hh_def_sched6 | 0 | 0 | Energy Saver Runtime - This optional point applies to energy saver units only - low |
| 1.3.6.1.4.1.9839.2.1.3.87 | cw-hours-h, hh_8, l1, config_in9, mm_def_sched6 | 0 | 0 | Chilled Water Runtime - This applies to chilled water units only - high |
| 1.3.6.1.4.1.9839.2.1.3.88 | cw-hours-l, mm_8, l2, config_in10, hh_def_sched7 | 0 | 0 | Chilled Water Runtime - This applies to chilled water units only - low |
| 1.3.6.1.4.1.9839.2.1.3.89 | c3-hours-h, l3, config_in11, mm_def_sched7 | 0 | 0 | Compressor 3 Runtime - This applies when unit has four stages tandem compressors - high |
| 1.3.6.1.4.1.9839.2.1.3.90 | c3-hours-l, l5, config_in12, hh_def_sched8 | 0 | 0 | Compressor 3 Runtime - This applies when unit has four stages tandem compressors - low |
| 1.3.6.1.4.1.9839.2.1.3.91 | c4-hours-l, r14, config_in13, mm_def_sched8 | 0 | 0 | Compressor 4 Runtime - This applies when unit has four stages tandem compressors. - high |
| 1.3.6.1.4.1.9839.2.1.3.92 | c4-hours-h, config_in14, hh_clock | 0 | 0 | Compressor 4 Runtime - This applies when unit has four stages tandem compressors. - low |
| 1.3.6.1.4.1.9839.2.1.3.93 | cond-hours-h, config_in15, mm_clock | 0 | 0 | Condenser Runtime - high |
| 1.3.6.1.4.1.9839.2.1.3.94 | cond-hours-l, config_in16, hh_vis | 0 | 0 | Condenser Runtime - low |
| 1.3.6.1.4.1.9839.2.1.3.95 | dx-fan-speed, config_in17, mm_vis | 0 | 0 | Fan speed (% of output) when compressor cooling. |
| 1.3.6.1.4.1.9839.2.1.3.96 | cw-fan-speed, config_in18 | 0 | 0 | Fan speed (% of output) when cold water cooling. |
| 1.3.6.1.4.1.9839.2.1.3.97 | fan-af-dx-sp, config_out1 | 0 | 0 | Fan air flow setpoint for DX unit (cfm) |
| 1.3.6.1.4.1.9839.2.1.3.98 | fan-af-cw-sp, config_out2 | 0 | 0 | Fan air flow setpoint for CW unit (cfm) |
| 1.3.6.1.4.1.9839.2.1.3.99 | zm-airflow-sp, chiller-name0, config_out3 | 0 | 0 | Zone Airflow Setpoint kcfm |
| 1.3.6.1.4.1.9839.2.1.3.100 | chiller-name1, config_out4 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.3.101 | config_out5 | 0 | 0 |