Description 1
Hour of the 3th defrosting
Sources for this description
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.9839.2.1.3.80
Hour of the 3th defrosting
Identification
{1 3 6 1 4 1 9839 2 1 3 80}
Definitions may combine these properties differently.
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.9839.2.1.3.80.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 4 distinct definitions; some records may not include a definition.
hh_def_sched3 OBJECT-TYPE
SYNTAX Integer32 (0..24)
UNITS "hours"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Hour of the 3th defrosting"
::= { integerObjects 80 }config_in2 OBJECT-TYPE
SYNTAX Integer32 (-32767..32767)
UNITS "N/A"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Type of device connected to input 2"
::= { integerObjects 80 }dd_6 OBJECT-TYPE
SYNTAX Integer32 (0..10)
UNITS "days"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Day of the 6th defrost"
DEFVAL { 0 }
::= { integerObjects 80 }d13 OBJECT-TYPE
SYNTAX Integer32 (0..1)
UNITS "N/A"
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Manual defrost request."
DEFVAL { 0 }
::= { integerObjects 80 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Hour of the 3th defrosting
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 2
Type of device connected to input 2
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 3
Day of the 6th defrost
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Description 4
Manual defrost request.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: hh_def_sched3
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"hh_def_sched3",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"24",
")",
"UNITS",
[
"literal",
"22686f75727322"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Hour of the 3th defrosting\"",
"::=",
"{",
"integerObjects",
"80",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
24
]
]
]
],
[
"UNITS",
"hours"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Hour of the 3th defrosting"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-irmpx-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Source data warning: Recovered from a file whose complete MIB does not parse. The original assignment and definition are preserved. Registration and implementation details may be inaccurate; consult the original file. Other damaged or unresolved declarations are not established registrations.
· Download CAREL-irmpx-MIBRelated source files and packages:
Status in source: current.
Names: config_in2
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"config_in2",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"-",
"32767",
".",
".",
"32767",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Type of device connected to input 2\"",
"::=",
"{",
"integerObjects",
"80",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
-32767,
32767
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Type of device connected to input 2"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-fcp-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: dd_6
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"dd_6",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"10",
")",
"UNITS",
[
"literal",
"226461797322"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Day of the 6th defrost\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"integerObjects",
"80",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
10
]
]
]
],
[
"UNITS",
"days"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Day of the 6th defrost"
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-mastercase-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Status in source: current.
Names: d13
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"d13",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
".",
".",
"1",
")",
"UNITS",
[
"literal",
"224e2f4122"
],
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Manual defrost request.\"",
"DEFVAL",
"{",
"0",
"}",
"::=",
"{",
"integerObjects",
"80",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0,
1
]
]
]
],
[
"UNITS",
"N/A"
],
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Manual defrost request."
],
null,
null,
null,
[
"DEFVAL",
0
]
]
}Vendor MIB copy from the Observium Community archive.
Module: CAREL-aria-MIB
See published definition above
{'SNMPv2-MIB': ['sysContact', 'sysName', 'sysLocation'], 'SNMPv2-SMI': ['enterprises', 'MODULE-IDENTITY'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9839.2.1.3.51 | assist-sel, time-Min-Off-Freecooling-Chiller-timing, min_volt_f2, stn, defrost_t4_mm, versione_sw_hg, f7, sgl_ore_comp1, defrost_t6_dd, swrel | 0 | 0 | 0= no comp assist, 1=one comp assist, 2= two comp assist, 3... 4... |
| 1.3.6.1.4.1.9839.2.1.3.52 | wtrvlv-sel, time-Min-Different-Freecooling-Chiller-timing, max_volt_f3, durata_pulizia, rit_acc_comp, p5, sgl_ore_comp2, defrost_t6_hh, lt_al_thrsh_al | 0 | 0 | Water valve type 0=none, 1=chill, 2=Engy, 3=Aux chill, 4=Disc Reg |
| 1.3.6.1.4.1.9839.2.1.3.53 | wtrvlv-volts-sel, time-Min-Same-Freecooling-Chiller-timing, triac_durat_f4, par_ora1, th, rit_spegn_comp, p9, defrost_t6_mm, sg_ore_comp, di1_config_a4 | 0 | 0 | Water valve voltage 0= 0-10, 1=2-10, 2=7-10, 3=6-9, 4=4-7 |
| 1.3.6.1.4.1.9839.2.1.3.54 | hum-volts, integral-Time-Freeccoling-Valve-PID, min_out_val_f7, par_ora2, tdow, p10, in_rampa_p3v, tm, hour_comp1, di2_config_a5 | 0 | 0 | % of 10volts of analog output #2 |
| 1.3.6.1.4.1.9839.2.1.3.55 | dehum-hours-h, derivative-Time-Freeccoling-Valve-PID, max_out_val_f8, manual_position, p11, fin_rampa_p3v, th, hour_l_comp1, comp_off_ext_a6 | 0 | 0 | Dehumidifier Runtime - High |
| 1.3.6.1.4.1.9839.2.1.3.56 | dehum-hours-l, output-Address-Valve-Freecooling, min_on_time_c1, posizione_valvola_perc, tempo_acc_pompa, p6, in_rampa_n3v, td, hour_comp2, tm_delay_id_a7 | 0 | 0 | Dehumidifier Runtime - Low |
| 1.3.6.1.4.1.9839.2.1.3.57 | delay-Freecooling-Thermal-Exclusion, min_off_time_c2, modello_valvola, h7, fin_rampa_n3v, hour_l_comp2, temp_al_del_ad | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.3.58 | autoflush-dly, n-of-alarm-External-Dry-Cooler, t_betw_2_on_c3, ti_int, tempo_run, hour_comp3, cnf_di_virt_a8 | 0 | 0 | Time between drain cycles 0=12hr, 1=24hr, 2=48hr, 3=96hr, 4=None |
| 1.3.6.1.4.1.9839.2.1.3.59 | y4-out, delay-Alarm-Static-Pressure, t_comp_2_on_c4, ti_low, h13, rit_syson, hour_l_comp3, en_lan_di2_a9 | 0 | 0 | Value sent to optional analog output#1 |
| 1.3.6.1.4.1.9839.2.1.3.60 | y5-out, n-of-Alarm-Static-Pressure, t_comp_2_off_c5, tipogas, h6, hour_comp4, en_mt_al_slv_ra | 0 | 0 | Value sent to optional analog output#2 |
| 1.3.6.1.4.1.9839.2.1.3.61 | air-flow, delay-Warning-Static-Pressure, t_comp_fan_c7, delay_pressure_probe_alarm, h10, vr1cen, hour_l_comp4, fans_mng_f0 | 0 | 0 | Current Fan Airflow - Based on calculated Pressure Diff formula |
| 1.3.6.1.4.1.9839.2.1.3.62 | opt-snsr1-name, n-of-Warning-Static-Pressure, off_fan_d_fd, tipo_sonda_eva, vr2cen, hour_comp5 | 0 | 0 | Name of the sensor |
| 1.3.6.1.4.1.9839.2.1.3.63 | opt-sns-1-ain-type, n-of-Alarm-Differential-Pressure, on_dalay_hg, ore_mac, hour_l_comp5, fan_0_cmp_0_f2 | 0 | 0 | Analog Sensor 1 Type {0=NTC 1=PT1000 2=0-1VDC 3=0-10VDC 4=4-20mA 5=ON/OFF 6=0-5VDC 7=NTC HT 8=-50T90 9=10T170} |
| 1.3.6.1.4.1.9839.2.1.3.64 | opt-snsr2-name, priming-Time-Hydraulic-Pressure, en_rotat_c6, cmp_start_valve_position, hour_comp6, fan_0_on_def_f3 | 0 | 0 | Name of the sensor |
| 1.3.6.1.4.1.9839.2.1.3.65 | opt-sns-2-ain-type, delay-priming-Time-Hydraulic-Pressure, d_flow_s_p1, dd_1, ore_comp1, hour_l_comp6, fan_rele_f4 | 0 | 0 | Analog Sensor 2 Type {0=NTC 1=PT1000 2=0-1VDC 3=0-10VDC 4=4-20mA 5=ON/OFF 6=0-5VDC 7=NTC HT 8=-50T90 9=10T170} |
| 1.3.6.1.4.1.9839.2.1.3.66 | opt-snsr3-name, output-Address-Alarm-Static-Pressure, d_flow_run_p2, hh_1, ore_comp2, h_hour_fan1, tm_off_drip_fd | 0 | 0 | Name of the sensor |
| 1.3.6.1.4.1.9839.2.1.3.67 | opt-sns-3-ain-type, n-of-Alarm-Flow-Rate, lp_delay_p3, mm_1, h1, x_h_main_fan, l_hour_fan1 | 0 | 0 | Analog Sensor 3 Type {0=NTC 1=PT1000 2=0-1VDC 3=0-10VDC 4=4-20mA 5=ON/OFF 6=0-5VDC 7=NTC HT 8=-50T90 9=10T170} |
| 1.3.6.1.4.1.9839.2.1.3.68 | opt-snsr4-name, priming-Time-Flow-Rate, al_prb_delay_pa, dd_2, h2, x_h_valve_comp1, h_hour_fan2, relay4_mode_h1 | 0 | 0 | Name of the sensor |
| 1.3.6.1.4.1.9839.2.1.3.69 | opt-sns-4-ain-type, delay-priming-Time-Flow-Rate, al_gen_delay_pc, hh_2, x_h_valve_comp2, l_hour_fan2, en_dis_keyb_h2 | 0 | 0 | Analog Sensor 4 Type {0=NTC 1=PT1000 2=0-1VDC 3=0-10VDC 4=4-20mA 5=ON/OFF 6=0-5VDC 7=NTC HT 8=-50T90 9=10T170} |
| 1.3.6.1.4.1.9839.2.1.3.70 | cw-fan-speed-bms, bms-address-IDENT, t_slot_cfg_rt, mm_2, f5, h_hour_fan3, remote_control | 0 | 0 | CW Fan speed (%) sent via BMS |
| 1.3.6.1.4.1.9839.2.1.3.71 | dx-fan-speed-bms, fan_time_fe, dd_3, d1, l_hour_fan3 | 0 | 0 | DX Fan speed (%) sent via BMS |
| 1.3.6.1.4.1.9839.2.1.3.72 | fan-speed-max, abilitazione_allarme_fumo, hh_3, d2, h_hour_fan4 | 0 | 0 | Maximum Fan speed (% of output) modulation. |
| 1.3.6.1.4.1.9839.2.1.3.73 | fan-speed-min, abilitazione_allarme_cf, mm_3, d5, l_hour_fan4 | 0 | 0 | Minimum Fan speed (% of output) modulation from pressure. |
| 1.3.6.1.4.1.9839.2.1.3.74 | fan-pr-sp, abilitazione_allarme_ht, dd_4, d6, sg_ore_fan, lan_address_sa | 0 | 0 | Fan pressure setpoint (0.01 inches of water) |
| 1.3.6.1.4.1.9839.2.1.3.75 | fan-pr-band, hh_4, d7, version, lan_lenght_sn | 0 | 0 | Fan pressure band (0.01 inches of water) |
| 1.3.6.1.4.1.9839.2.1.3.76 | fan-af-max, mm_4, d8, h_hour_fan5, hh_def_sched1 | 0 | 0 | Maximum air flow limit of setpoint from BMS or valve modulation. |
| 1.3.6.1.4.1.9839.2.1.3.77 | fan-af-min, dd_5, d9, l_hour_fan5, mm_def_sched1 | 0 | 0 | Minimum air flow limit of setpoint from BMS or valve modulation. |
| 1.3.6.1.4.1.9839.2.1.3.78 | fan-kfactor, hh_5, d10, time_on_black_out, hh_def_sched2 | 0 | 0 | Fan K Factor |
| 1.3.6.1.4.1.9839.2.1.3.79 | num-fans, mm_5, d12, config_in1, mm_def_sched2 | 0 | 0 | Number of fans installed in this unit |
| 1.3.6.1.4.1.9839.2.1.3.81 | ht2-hours-h, hh_6, config_in3, mm_def_sched3 | 0 | 0 | Heater 2 Runtime - high |
| 1.3.6.1.4.1.9839.2.1.3.82 | ht2-hours-l, mm_6, config_in4, hh_def_sched4 | 0 | 0 | Heater 2 Runtime - low |
| 1.3.6.1.4.1.9839.2.1.3.83 | ht3-hours-h, dd_7, r27, config_in5, mm_def_sched4 | 0 | 0 | Heater 3 Runtime - high |
| 1.3.6.1.4.1.9839.2.1.3.84 | ht3-hours-l, hh_7, l4, config_in6, hh_def_sched5 | 0 | 0 | Heater 3 Runtime - low |
| 1.3.6.1.4.1.9839.2.1.3.85 | engy-hours-h, mm_7, h16, config_in7, mm_def_sched5 | 0 | 0 | Energy Saver Runtime - This optional point applies to energy saver units only -high |
| 1.3.6.1.4.1.9839.2.1.3.86 | engy-hours-l, dd_8, p12, config_in8, hh_def_sched6 | 0 | 0 | Energy Saver Runtime - This optional point applies to energy saver units only - low |
| 1.3.6.1.4.1.9839.2.1.3.87 | cw-hours-h, hh_8, l1, config_in9, mm_def_sched6 | 0 | 0 | Chilled Water Runtime - This applies to chilled water units only - high |
| 1.3.6.1.4.1.9839.2.1.3.88 | cw-hours-l, mm_8, l2, config_in10, hh_def_sched7 | 0 | 0 | Chilled Water Runtime - This applies to chilled water units only - low |
| 1.3.6.1.4.1.9839.2.1.3.89 | c3-hours-h, l3, config_in11, mm_def_sched7 | 0 | 0 | Compressor 3 Runtime - This applies when unit has four stages tandem compressors - high |
| 1.3.6.1.4.1.9839.2.1.3.90 | c3-hours-l, l5, config_in12, hh_def_sched8 | 0 | 0 | Compressor 3 Runtime - This applies when unit has four stages tandem compressors - low |
| 1.3.6.1.4.1.9839.2.1.3.91 | c4-hours-l, r14, config_in13, mm_def_sched8 | 0 | 0 | Compressor 4 Runtime - This applies when unit has four stages tandem compressors. - high |
| 1.3.6.1.4.1.9839.2.1.3.92 | c4-hours-h, config_in14, hh_clock | 0 | 0 | Compressor 4 Runtime - This applies when unit has four stages tandem compressors. - low |
| 1.3.6.1.4.1.9839.2.1.3.93 | cond-hours-h, config_in15, mm_clock | 0 | 0 | Condenser Runtime - high |
| 1.3.6.1.4.1.9839.2.1.3.94 | cond-hours-l, config_in16, hh_vis | 0 | 0 | Condenser Runtime - low |
| 1.3.6.1.4.1.9839.2.1.3.95 | dx-fan-speed, config_in17, mm_vis | 0 | 0 | Fan speed (% of output) when compressor cooling. |
| 1.3.6.1.4.1.9839.2.1.3.96 | cw-fan-speed, config_in18 | 0 | 0 | Fan speed (% of output) when cold water cooling. |
| 1.3.6.1.4.1.9839.2.1.3.97 | fan-af-dx-sp, config_out1 | 0 | 0 | Fan air flow setpoint for DX unit (cfm) |
| 1.3.6.1.4.1.9839.2.1.3.98 | fan-af-cw-sp, config_out2 | 0 | 0 | Fan air flow setpoint for CW unit (cfm) |
| 1.3.6.1.4.1.9839.2.1.3.99 | zm-airflow-sp, chiller-name0, config_out3 | 0 | 0 | Zone Airflow Setpoint kcfm |
| 1.3.6.1.4.1.9839.2.1.3.100 | chiller-name1, config_out4 | 0 | 0 | |
| 1.3.6.1.4.1.9839.2.1.3.101 | config_out5 | 0 | 0 |